Production specification RECOVERY BRIDGE RECTIFIER FDB101--FDB107 FEATURES Pb z Rating to 1000V PRVP z Surge overload rating to 30 Amperes peak z Ideal for printed circuit board z Reliable low cost construction utilizing molded Lead-free plastic technique results in inexpensive product z Lead solderable per MIL-STD-202 method 208 z Lead: silver plated copper, solderde plated z Plastic material has UL flammability classification94V-O Maximum Ratings (@TA = 25°C unless otherwise specified) Characteristic Symbol FDB101 FDB102 FDB103 FDB104 FDB105 FDB106 FDB107 Peak Repetitive Reverse Voltage VRRM 50 100 200 400 600 800 1000 V RMS Reverse Voltage VRMS 35 75 140 280 420 560 700 V DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward Output current @TA=25℃ UNITS IF(AV) 1.0 A IFSM 30 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load Thermal Characteristics Characteristic Operating junction temperature range Storage temperature range Symbol FDB101 FDB102 FDB103 FDB104 FDB105 FDB106 FDB107 UNITS TJ - 55 ---- + 150 ℃ TSTG - 55 ---- + 150 ℃ Electrical Characteristics (@TA = 25°C unless otherwise specified) Characteristic Maximum instantaneous forward voltage at 1.0 A Maximum reverse current @TA=25℃ at rated DC blocking voltage @TA=100℃ Maximum reverse recovery time (Note1) Symbol FDB101 FDB102 FDB103 VF IR t rr 150 FDB104 FDB105 FDB106 FDB107 UNITS 1.3 V 10 μA 1.0 mA 250 500 ns NOTE:1. Measured with IF=0.5A,IR=1A, Irr=0.25A. Document Number：DFM707AA www.gmicroelec.com 1 Production specification RECOVERY BRIDGE RECTIFIER FDB101--FDB107 PACKAGE OUTLINE DIMENSIONS DFM Dim Min Max - + A 8.20 8.60 B 6.10 6.50 ~ ~ C 2.35 2.65 E 0.15 0.35 F 5.40 6.00 I 0.35 0.65 J 8.40 9.00 K 4.80 5.20 L 7.65 8.15 All Dimensions in mm PACKAGE INFORMATION Device Package Shipping FDB101--FDB107 DFM 50unit/pipe Document Number：DFM707AA www.gmicroelec.com 2 Production specification RECOVERY BRIDGE RECTIFIER Document Number：DFM707AA FDB101--FDB107 www.gmicroelec.com 3