Spectrum MM4XXN-1 Triple balanced mixer Datasheet

Triple Balanced Mixer
Model MM4xxN-1
Multi-Octave Band
RF 1.5 to 9.0 GHz
Model MM4xxN-1
Electrical Specifications: (1)
Conditions
Parameter
SSB Conversion
loss:(2) (3)
RF (GHz)
2.0-8.0
2.0-8.0
1.5-9.0
Isolation
LO to RF:
LO (GHz)
2.0-8.0
2.0-8.0
1.5-9.0
Specifications
IF (MHz)
10-2000
10-4500
10-4500
1.5-9.0
1.5-4.5
4.5-9.0
1.5-9.0
1.5-9.0
1.5-9.0
1.5-9.0
10-4500
10-4500
Input Third Order
Intercept Point:
1.5-9.0
1.5-9.0
10-4500
LO Power: (4)
1.5-9.0
1.5-9.0
10-4500
LO to IF:
RF to IF:
IF to RF:
Input 1 dB
Compression Point:
1.5-9.0
Min
Typical
6.3 dB
7.3 dB
8.0 dB
10 dB
20 dB
20 dB
17 dB
27 dB
30 dB
23 dB
25 dB
+5 dBm
+8 dBm
+12 dBm
+15 dBm
+14 dBm
+17 dBm
+21 dBm
+24 dBm
+10 dBm
+13 dBm
+17 dBm
+21 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55 C to +100 C
with the nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss.
3. Conversion loss typically degrades less than 0.5 dB at +100 C and improves less than 0.5 dB at -55 C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
Outline: N
MM4xxN-1
Max
7.5 dB
8.5 dB
10.5 dB
MM44
MM46
MM47
MM48
MM44
MM46
MM47
MM4 8
MM44
MM46
MM47
MM48
LO Power
4 = +10 dBm
6 = +13 dBm
7 = +17 dBm
8 = +21 dBm
Drop-In
Module or With
SMA(F) Connectors
M = Module
P = With Connectors
Typical
Performance
at 25 °C
SPECTRUM
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Rev.
09/27/06
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
Similar pages