MIC G2SB60 Glass passivated single-phase bridge rectifier Datasheet

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
CURRENT
GBL
•
•
O
+
1.9 - 2.5
~
~
~
17 - 18.2
2.03 - 2.41
0.9 - 1.1
3.25 - 3.56
Case: molded plastic body over passivated junctions
Terminal: Plated leads solderable per MIL-STD-750
Method 2026
Mounting position: Any
Weight: 0.071 oz, 2.0g
4.8 - 5.3
0.46 - 0.56
MECHANICAL DATA
•
•
20.7 - 20.9
20.7×45
10.4 - 10.7
Plastic package has Underwriters Laboratory
Flammability Glassification 94V-0
Glass passivated chip junction
High case dielectric strength
Typical IR less than 0.1 A
High surge current capability
Ideal for printed circuit boards
High temperature soldering guaranteed:
260℃/10 seconds, 0.375”(9.5mm) lead length
5lbs.(2.3kg) tension
0.80 - 1.08
•
•
•
•
•
•
1.5 Amperes
1.5 - 2.03
FEATURES
•
200 to 1000 Volts
VOLTAGE RANGE
G2SB20 THRU G2SB100
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
G2SB20
Maximum Reverse Peak Repetitive Voltage
VRRM
200
Maximum RMS Voltage
VRMS
140
Maximum DC Blocking Voltage
VDC
200
Maximum Average Forward
T C=80℃ (Note 1)
Rectified Output Current At
TA=25℃
Peak Forward Surge Current single sine-wave
superimposed on rated load
(JEDEC Method)
Maximum Instantaneous Forward drop
Per leg At 0.75 Amperes
TA=25℃
Maximum Reverse Current at rated
DC blocking voltage per element
TA=125℃
Rating for Fusing (t<8.3ms)
Typical Thermal Resistance Per Leg
Operating Junction Storage and Temperature Range
G2SB60
600
420
600
G2SB80
800
560
800
G2B100
1000
700
1000
UNIT
Volts
Volts
Volts
I(AV)
2.0
1.5
Amps
IFSM
80
Amps
VF
1.00
Volts
IR
I2 t
RΘJA
RΘJC
TJ ,TSTG
5.0
300
27
40
12
-55 to +150
Notes: 1.Unit mounted on P.C.B. at 0.375” (9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads
E-mail: [email protected]
Web Site: www.cnmic.com
μA
A2s
℃/W
℃
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
200 to 1000Volts
VOLTAGE RANGE
G2SB20 THRU G2SB100
CURRENT
1.5 Amperes
RATINGS AND CHARACTERISTIC CURVES G2SB20 THRU G2SB100
FIG. 2- MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
FIG. 1- DERATING CURVE
OUTPUT RECTIFIED CURRENT
100
P.C.B. Mounting, T A
PEAK FORWARD SURGE,
CURRENT,(A)
AVERAGE FORWARD OUTPUT,
(IF(AV))
2
1.5
1
0.5
0
0
25
75
50
100
125
150
80
60
40
20
0
1 CYCLE
1
100
AMBIENT TEMPERATURE, ℃
NUMBER OF CYCLES AT 60 Hz
FIG. 4- TYPICAL REVERSE CHARACTERISTICS
PER LEG
FIG. 3- TYPICAL FORWORD CHARACTERISTICS
PER LGE
100
INSTANTANEOUS REVERSE
CURRENT, (A )
10
1
0.1
0.01
0.6
1
1.4
1.8
2.2
2.6
3
1
0.1
TA =25 ℃
40
20
80
60
100
INSTANTANEOUS FORWARD VOLTAGE, (V)
PERCENT OF RATED PEAK REVERSE VOLTAGE,
(%)
FIG. 5- TYPICAL JUNCTION CAPACITANCE
PER LEG
FIG. 6- TYPICAL TRANSIENT THERMAL
IMPEDANCE
100
10
1
0.1
0
3.4
100
JUNCTION CAPACITANCE, (pF)
TA =125℃
10
0.01
1
10
100
TRANSIENT THERMAL IMPEDANCE
(℃/W)
INSTANTANEOUS FORWARD
CURRENT, (A)
100
10
1
0.1
0.01
0.01
E-mail: [email protected]
0.1
1
T, HEATING TIME (SEC.)
REVRESE VOLTAGE,(V)
Web Site: www.cnmic.com
10
100
Similar pages