DATA SHEET TFT COLOR LCD MODULE NL8060BC31-17 31 cm (12.1 inches), 800 × 600 pixels, 262144 colors High luminance, Wide viewing angle, Reversible scan direction DESCRIPTION NL8060BC31-17 is a TFT (thin film transistor) active matrix color liquid crystal display (LCD) module comprising amorphous silicon TFT attached to each signal electrode, a driving circuit, and a backlight. NL8060BC31-17 has a built-in backlight. The backlight includes long-life-lamps and the lamps are replaceable with a holder. The 31 cm diagonal display area contains 800 × 600 pixels and can display 262144 color simultaneously. NL8060BC31-17 is suitable for industrial application use, because the viewing angle is wide and the luminance is high. Also, the viewing direction is selectable either upper or lower side by changing scan direction. FEATURES 2 • High luminance (350 cd/m , at IL= 5mArms/lamp) • Wide viewing angle (with Retardation film) • Low reflection • Reversible scan direction • 6-bit digital RGB input signals • Data enable (DE) function • Smooth polarizer surface (no antiglare treatment) • Edge type backlight with two long-life-time lamps (one lamp holder) • Lamp holder replaceable APPLICATIONS • Display terminals for control system • Monitors for process controller The information in this document is subject to change without notice. Please confirm with the delivery specification before starting to design the system. Document No. EN0510EJ1V0DS00 Date Published July 2000 P CP (N) Printed in Japan © 2000 NL8060BC31-17 STRUCTURE AND FUNCTIONS A color TFT (thin film transistor) LCD module is comprised of a TFT liquid crystal panel structure, LSIs for driving the TFT array, and a backlight assembly. The TFT panel structure is created by sandwiching liquid crystal material in the narrow gap between a TFT array glass substrate and a color filter glass substrate. After the driver LSIs are connected to the panel, the backlight assembly is attached to the backside of the panel. RGB (red, green, blue) data signals from a source system is modulated into a form suitable for active matrix addressing by the onboard signal processor and sent to the driver LSIs which in turn addresses the individual TFT cells. Acting as an electro-optical switch, each TFT cell regulates light transmission from the backlight assembly when activated by the data source. By regulating the amount of light passing through the array of red, green, and blue dots, color images are created with clarity. OUTLINE OF CHARACTERISTICS (at room temperature) Item 2 Description Display area 246.0 (H) × 184.5 (V) mm Drive system a-Si TFT active matrix Display colors 262,144 colors Number of pixels 800 × 600 pixels Pixel arrangement RGB vertical stripe Pixel pitch 0.3075 (H) × 0.3075 (V) mm Module size 280.0 (H) × 210.0 (V) × 13.0 (D) mm (typ.) Weight 750 (typ.) Contrast ratio 350:1 (typ.) Viewing angle (more than the contrast ratio of 10:1) Horizontal: 55° (typ. left side, right side) Vertical: 40° (typ. up side), 50° (typ. down side) Designed viewing direction • Wider viewing angle with contrast ratio Color gamut 43% (typ'. at center, to NTSC) Response time 15 ms (typ.), “white 100%” to ”black 10%” Luminance 350 cd/m (typ.) (Lamp current: IL = 5 mArms per lamp) Signal system 6-bit signals for each of RGB primary colors, synchronous signals (Hsync, Vsync), dot clock (CLK) Supply voltage 3.3 V [5.0 V] (Logic, LCD driving) Backlight Edge light type, two cold cathode fluorescent lamp in a holder • Lamp holder : Part No.121LHS15 • Recommended invertor: Part No. 121PW111 Power consumption 7.0 W (typ. at 3.3 V, with a recommended inverter) : down side (6 o’clock, normal scan) up side (12 o’clock, reverse scan) • Wider viewing angle without image reversal: up side (12 o’clock, normal scan) down side (6 o’clock, reverse scan) • Optimum grayscale (γ = 2.2) : perpendicular 2 Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 BASIC STRUCTURE 200 Ω R0 - R5 H-driver 200 Ω G0 - G5 200 Ω 2400 lines 47 Ω TFT LCD panel 200 Ω H sync V-driver CLK Controller B0 - B5 600 lines H: 800 × 3 (R, G, B) V: 600 200 Ω V sync DE 200 Ω Power supply for drivers DPS 4.7 kΩ VCC GND DC/DC Converter Backlight VH VH Backlight VL Note 1: GND is not connected to FG (Frame Ground) in the LCD module. Data Sheet EN0510EJ1V0DS00 3 NL8060BC31-17 GENERAL SPECIFICATIONS Item Specification Unit Module size 280.0 ± 0.5 (H) × 210.0 ± 0.5 (V) × 13.7 max. (D) mm Display area 246.0 (H) × 184.5 (V) [Diagonal display area: 31 cm (Type 12.1)] mm 800 × 3 (H) × 600 (V) pixel Dot pitch 0.1025 (H) × 0.3075 (V) mm Pixel pitch 0.3075 (H) × 0.3075 (V) mm RGB (Red, Green, Blue) vertical stripe − 262,144 color 780 (max.) g Number of pixels Pixel arrangement Display colors Weight ABSOLUTE MAXIMUM RATINGS Parameter Symbol Rating Unit VCC −0.3 to 6.5 V Input voltage VI −0.3 to VCC + 0.3 V Lamp voltage VL 1800 Vrms Storage temp. TST −20 to 60 °C Operating temp. TOP 0 to 50 °C Module surface* ≤ 95 % Ta ≤ 40°C ≤ 85 % Supply voltage Relative Humidity (RH) Absolute humidity Absolute humidity shall not exceed Ta = 50°C, RH=85% g/m Remarks Ta = 25°C − No condensation 40 < Ta ≤ 50°C 3 Ta > 50°C * Measured at the panel surface (including self-heat) ELECTRICAL CHARACTERISTICS (1) Logic LCD driving Ta = 25°C Parameter Symbol Min. Typ. Max. Unit Supply voltage VCC 3.0 (4.75) 3.3 (5.0) 3.6 (5.25) V VCC = 3.3 V (VCC = 5.0 V) Logic input “L” voltage VIL 0 − VCC × 0.3 V CMOS level Logic input “H” voltage VIH VCC × 0.7 − VCC V Supply current ICC − − * 320 (240) 600 (500) mA * Checker flag pattern (in EIAJ ED-2522) 4 Data Sheet EN0510EJ1V0DS00 Remarks VCC = 3.3 V (VCC = 5.0 V) NL8060BC31-17 (2) Backlight Ta = 25°C Parameter Symbol Min. 2.0 Note 1 Typ. Max. Unit Remarks 5.0 5.5 mArm at a lamp Lamp current IL Lamp voltage VL − 600 − Vrms IL = 5mA Lamp turn on voltage Note 2 VS 960 − − Vrms Ta = 25°C 1200 − − Oscillator frequency Ft 58 65 69 Note 1: Ta = 0°C kHz Note 3 In an atmosphere of below 10°C, keep the lamp current more than 3.0 mArms in order to prevent the lamp from blinking. Note 2: The phase of the supply voltage for lamps must keep same one. Note 3: Recommended value of "Ft". • Ft is within the specification. and • Ft = 1/4th × (2n-1) th: Hsync period n: a natural number (1, 2, 3…) If Ft is out of the recommended value, interference between Ft frequency and Hsync frequency may cause beat on the display. SUPPLY VOLTAGE SEQUENCE Notes1. The supply voltage for input signals should be the same as VCC. 3.0 (4.75 V) 0<t<35 ms 3.0 (4.75 V) 0<t<35 ms VCC Signals Time VCC - OFF VALID VCC - ON Signals: CLK, Hsync, Vsync, DE, R0-R5, G0-G5, B0-B5 2. Turn on the backlight within the LCD operation period. When the backlight turns on before LCD operation or the LCD operation turns off before the backlight turns off, the display may momentarily become white. 3. When the power is off, please keep whole signals (Hsync, Vsync, CLK, DE, R0-R5, G0-G5, B0-B5) low level or high impedance. 4. Wrong power sequence may damage to the module. 5. The signal should not be down during operation. Even if signal could recover, LCD module can not be operated correctly, the display may be un-uniformity. In case signal is down, VCC should be turned off, and then turn VCC and signal on as above sequence. Data Sheet EN0510EJ1V0DS00 5 NL8060BC31-17 INTERFACE AND CONNECTOR PIN ASSIGNMENT (1) Interface signals, power supply CN1: DF9-41P-1V (HIROSE ELECTRIC CO., LTD.) Adaptable socket: DF9-41S-1V (HIROSE ELECTRIC CO., LTD.) or IL-310-T41S-VF (Japan Aviation Electronics Industry Limited (JAE) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Symbol GND CLK GND Hsync Vsync GND GND GND R0 R1 R2 GND R3 R4 R5 GND GND GND G0 G1 G2 Function Ground Dot clock Ground Horizontal sync. Vertical sync. Ground Ground Ground Red data (LSB) Red data Red data Ground Red data Red data Red data (MSB) Ground Ground Ground Green data (LSB) Green data Green data Pin No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Symbol GND G3 G4 G5 GND GND GND B0 B1 B2 GND B3 B4 B5 GND DE N.C. VCC VCC DPS LSB : Least Significant Bit MSB : Most Significant Bit Notes 1. DE/This function recognizes Fixed or DE mode whe Vsync rises. Low = DE mode High = Fixed mode Notes 2. DPS/DPS changes scan direction (normal scan and reverse scan). Low or Open = Normal scan High = Reverse scan See DISPLAY POSITION about the scan directions. 6 Data Sheet EN0510EJ1V0DS00 Function Ground Green data Green data Green data (MSB) Ground Ground Ground Blue data (LSB) Blue data Blue data Ground Blue data Blue data Blue data (MSB) Ground Data enable signal Not Connection Power supply Note 1 Power supply Note 1 Scan direction select Note 2 NL8060BC31-17 (2) Lamp connector CN2: BHR-03VS-1 Adaptable socket: SM03 (4.0) B-BHS-TB Supplier: J.S.T TRADING COMPANY, LTD. Pin No. Symbol Function 1 VL Low voltage terminal 2 VH High voltage terminal 3 VH High voltage terminal * VH and VL must be connected correctly. If you make a mistake to connect, you will get hurt and the module will break. (3) Connection of recommended Inverter: 121PW111 CN1 Part No.: LZ-5P-SL-SMT Adaptable socket: LZ-5S-SC3 Supplier: Pin No. Japan Aviation Electronics Industry Limited (JAE) Symbol Function 1 VDDB Power supply (12 V) 2 VDDB Power supply (12 V) 3 GNDB Backlight ground 4 GNDB Backlight ground 5 BRTHL Luminance control Note 1 Note 1: BRTHL = High (+5 V) or open : High luminance (100%) BRTHL = Low (GNDB level) : Low luminance (20%) CN3 Part No.: IL-Z-3PL-SMTY Adaptable socket: IL-Z-3S-S125C3 Supplier: Japan Aviation Electronics Industry Limited (JAE) Pin No. Symbol Function 1 BRTC Backlight ON/OFF signal Note 1 2 BRTH Luminance control input Note 2 3 BRTL Luminance control input Note 2 Notes 1. BRTC = High (+5 V) or Open : Backlight “ON” BRTC = Low (GNDB level) : Backlight “OFF” Data Sheet EN0510EJ1V0DS00 7 NL8060BC31-17 2. <1> A way of luminance control by a variable resistor. This way works when BRTHL (No.5 pin) of CN1 is opened. Mating variable resistor : 10 kΩ ±5 % Minimum luminance (20%) : R = 0 Ω BRTL BRTH Maximum luminance (100%) : R = 10 kΩ R <2> A way of luminance control by a voltage BRTL and BRTHL are opened. The range of input voltage between BRTH and GNDB is as follows. Minimum luminance (20%, typ.) : 3.45 V Maximum luminance (100%) 8 : ≤ 1.0 V Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 (4) Connector location Upper side CN2 <Rear view> 1 2 3 4 • CN1 • • Lower side • • • • CN3 Recommended inverter (121PW111) • • • 41 40 <Module side Pin arrangement of CN1> 1 1 1 2 2 2 3 3 3 4 <Lamp side Pin arrangement of CN2> <Inverter side Pin arrangement of CN3> 5 <Inverter side Pin arrangement of CN1> Data Sheet EN0510EJ1V0DS00 9 NL8060BC31-17 DISPLAY COLORS vs. INPUT DATA SIGNALS Display colors Data signal (0: Low level, 1: High level) R5 Basic colors R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Dark ↑ | | | | ↓ | | | Red grayscale Bright Red Black Dark 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ↓ Green Black Dark | | | | | | | | 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 ↑ ↓ Blue | 0 Blue grayscale Bright | 1 Green grayscale Bright | 1 ↑ | | | | | | | | | 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Note Colors are developed in combination with 6-bit signals (64 steps in grayscale) of each primary red, green, and blue color. This process can result in up to 262144 (64 × 64 × 64) colors. 10 B0 Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 INPUT SIGNAL TIMING (1) Input signal specifications Parameter CLK Hsync Symbol Min. Typ. Max. Unit Frequency 1/tC 34.0 38.362 40.0 MHz Duty tch/tC 0.4 0.5 0.6 − − Rise, fall tcrf − − 10 ns − Period th 24.3 26.693 − µs 829 1024 − CLK Display period thd Front-porch thf Pulse width thp Back-porch thb 800 26.067 ns (typ.) 37.468 kHz (typ.) − CLK − 24 − CLK Fixed mode 4 24 − CLK DE mode 12 72 127 CLK Fixed mode 12 72 − CLK DE mode 73 128 198 CLK Fixed mode 13 128 509 CLK DE mode thp + thb Vsync Remarks CLK Fixed mode 25 200 200 511 CLK DE mode CLK-Hsync timing thch 10 − − ns − Hsync-CLK timing thcs 8 − − ns − Hsync-Vsync timing thv 1 − − CLK − Vsync-Hsync timing tvs 15 − − ns − Rise, fall thrf − − 10 ns − tv 16.1 16.683 17.2 ms 603 625 − H Period Display period tvd Front-porch tvf Pulse width tvp Back-porch tvb 600 59.95 Hz (typ.) H − 1 − H Fixed mode 1 1 − H DE mode 1 2 23 H Fixed mode 1 2 − H DE mode 1 22 23 H Fixed mode 1 22 − H DE mode tvp + tvb H Fixed mode 2 24 24 254 H DE mode Rise, fall tvrf − − 10 ns − CLK-DATA timing tds 8 − − ns − DATA R0 – R5 G0 – G5 B0 – B5 DATA-CLK timing tdh 10 − − ns − Rise, fall tdrf − − 10 ns − DE DE-CLK timing tes 8 − − ns − CLK-DE timing teh 10 − − ns Rise, fall terf − − 10 ns * All of parameters should be kept in the specified range. Data Sheet EN0510EJ1V0DS00 11 NL8060BC31-17 (2) Definition of input signal timing <Vertical> tv tvp Vsync tvf tvb Display period (note) tvd DE <Horizontal> th thp Hsync thf thb Display period (note) thd DE Note These do not exist as signals. 12 Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 tC tch CLK 0.7 VCC 0.5 VCC 0.3 VCC tcrf tcrf tds DATA tdh INVALID INVALID (R0-R5) 0.7 VCC (G0-G5) 0.5 VCC (B0-B5) 0.3 VCC tdrf teh DE tdrf tes terf 0.5 VCC thch Hsync tes 0.7 VCC 0.5 VCC 0.3 VCC terf CLK teh thcs 0.7 VCC 0.5 VCC 0.3 VCC thrf Hsync 0.5 VCC thv Vsync ths 0.7 VCC 0.5 VCC 0.3 VCC tvrf Data Sheet EN0510EJ1V0DS00 13 NL8060BC31-17 (3) Input signal timing chart a) Fixed timing mode Vsync 1H (min.) 1H (min.) 1H 24H (fixed) 600H (fixed) 1H Hsync 23 1 2 3 623 0 624 24 Hsync 25 24 623 624 0 R0 - R5 G0 - G5 B0 - B5 D (X, 0) D (X, Y) D (X, 598) D (X, 599) INVALID INVALID (Note: X = 0 to 799) Hsync R0 - R5 G0 - G5 B0 - B5 D (0, Y) D (1, Y) INVALID D (X, Y) D (798, Y) D (799, Y) INVALID Hsync 1CLK 2CLK (min.) 2CLK (min.) 200CLK (fixed) 800CLK (fixed) 24CLK CLK 1 2 200 201 1000 1001 1024 R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (799, Y) INVALID (Note: Y = 0 to 599) 14 Data Sheet EN0510EJ1V0DS00 1 NL8060BC31-17 b) DE mode Vsync 1H tvp tvb tvf 600H (fixed) Hsync 1 1 2 3 DE R0 - R5 G0 - G5 B0 - B5 D (X, 0) D (X, Y) D (X, 599) INVALID INVALID (Note: X = 0 to 799) DE R0 - R5 G0 - G5 B0 - B5 D (0, Y) D (1, Y) INVALID D (X, Y) D (798, Y) D (799, Y) INVALID Hsync 1CLK thb thp 800CLK (fixed) thf CLK 1 2 1 DE R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (799, Y) INVALID (Note: Y = 0 to 599) Data Sheet EN0510EJ1V0DS00 15 NL8060BC31-17 DISPLAY POSITION Normal scan (DPS = “Low” or “Open”) D (0, 1) D (1, 1) --------- D (X, 1) D (0, 1) D (1, 1) --------- D (X, 1) --------D (0, Y) D (1, Y) --------- D (0, 598) D (1, 598) D (0, 599) D (1, 599) --------- D (798, 1) D (799, 1) --------- D (798, 1) D (799, 1) D (798, Y) D (799, Y) --------D (X, Y) --------- --------- D (X, 598) --------- D (798, 598) D (799, 598) --------- D (X, 599) --------- D (798, 599) D (799, 599) --------- --------- Reverse scan (DPS = “High”) D (799,599) D (798,599) --------- D (X, 599) --------- D (1,599) D (0,599) D (799,598) D (798,598) --------- D (X, 598) --------- D (1,598) D (0,598) D (799, Y) D (798, Y) --------- D (1, Y) D (0, Y) --------- --------D (X, Y) --------- ----------------- D (799, 1) D (798, 1) --------- D (X, 1) --------- D (1, 1) D (0, 1) D (799, 0) D (798, 0) --------- D (X, 0) --------- D (1, 0) D (0, 0) * Below drawings show relations between the scan direction and the viewing direction. Normal scan C N 1 16 Reverse scan D (0, 0) D (799, 0) D (0, 599) D (799, 599) C N 2 C N 2 Data Sheet EN0510EJ1V0DS00 D (0, 0) D (799, 0) D (0, 599) D (799, 599) C N 1 NL8060BC31-17 OPTICAL CHARACTERISTICS Ta = 25°C Note 1 Item Contrast ratio Symbols CR Luminance Lumax. Luminance uniformity − Conditions Note 2 Note 2 Min. Typ. Max. Unit 200 350 − − 270 350 − cd/m − − 1.4 − Note 5 Min. Typ. Max. Unit Remarks max./min. Remarks Note 3 2 Note 4 Reference data Item Color gamut Viewing Horizontal angle range Vertical Response time Symbols Conditions C at center, to NTSC 35 43 − % − θx+ CR > 10, θy = ±0° 45 55 − deg. Note 7 θx− CR > 10, θy = ±0° 45 55 − deg. θy+ CR > 10, θx = ±0° 30 40 − deg. θy− CR > 10, θx = ±0° 40 50 − deg. t on White to black 100% → 10% − 15 40 ms t off Black to white 0% → 90% − 55 70 ms Note 6 Notes 1. VCC = 3.3 V, IL = 5.0 mA rms, with recommended inverter Part No. 121PW111. 2. Viewing angle: θx = ±0°, θy = ±0°, At center. 3. The contrast ratio is calculated by using the following formula. Contrast ratio (CR) = Luminance with all pixels in "white" Luminance with all pixels in "black" The luminance is measured in darkroom. 4. The luminance is measured after 20 minutes from the module works, with all pixels in "white". Typical value is measured after luminance saturation. The luminance is measured in darkroom. 1° Photodetector (TOPCON BM-5A) 50 cm LCD MODULE Data Sheet EN0510EJ1V0DS00 17 NL8060BC31-17 5. The luminance uniformity is calculated by using following formula. Luminance uniformity = Maximum luminance Minimum luminance The luminance is measured at near the five points shown below. Column (133) (400) (667) Line 1 4 (100) 3 (300) 2 5 (500) 6. Definition of response time is as follows. Photodetector output signal is measured when the Luminance changes "white" to "black" or "black" to "white". 100% Display color White Luminance range 90% Black 10% 0% ton toff Time 7. Definitions of viewing angle are as follows. Perpendicular 12 o’clock θ x– Left θ y+ θ x+ Upper θ y– Lower Right 18 Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 RELIABILITY TEST SPECIFICATIONS Test items Test conditions Judgement High temperature/humidity operation 50 ±2°C, 85% relative humidity 240 hours Display data is black. Note 1 Heat cycle (operation) <1> 0°C ±3°C … 1 hour 55°C ±3°C … 1 hour 50 cycles, 4 hours/cycle Display data is black. Note 1 Note 1 <2> <3> −20°C ±3°C … 30 minutes 60°C ±3°C … 30 minutes 100 cycles Temperature transition time within 5 minutes <1> 5 - 100 Hz, 19.6 m/s (2G) <2> 1 minute/cycle, X, Y, Z direction 120 times each direction <1> 539 m/s (55G), 11 ms <2> X, Y, Z direction 5 times each direction <2> <3> Thermal shock (non-operation) Vibration (non-operation) Mechanical shock (nonoperation) ESD (operation) Dust (operation) <1> 2 Note 1 Note 2 2 150 pF, 150 Ω, ±10 kV 9 places on a panel 10 times each place at one-second intervals Note 1 Note 2 Note 1 Note 3 15 kinds of dust (JIS Z 8901) Hourly 15 seconds stir, 8 times repeat Note 1 Notes 1. Display function is checked by the same condition as LCD module out-going inspection. 2. Physical damage. 3. Discharge points are shown as follows. Data Sheet EN0510EJ1V0DS00 19 NL8060BC31-17 GENERAL CAUTIONS Next figures and sentence are very important, please understand these contents as follows. This figure is a mark that you will get hurt and/or the module will have damages when you make a mistake to operate. CAUTION This figure is a mark that you will get an electric shock when you make a mistake to operate. This figure is a mark that you will get hurt when you make a mistake to operate CAUTION Do not touch an inverter …on which is stuck a caution label… while the LCD module is under the operation, because of dangerous high voltage. (1) Caution when taking out the module <1> Pick the pouch only, when taking out the module from a carrier box. (2) Cautions for handling the module <1> As the electrostatic discharges may break the LCD module, handle the LCD module with care against electrostatic discharges. Peel protection sheet cut from the LCD panel surface as slowly as possible. <2> As the LCD panel and backlight element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. <3> As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. <4> Do not pull the interface connectors in or out while the LCD module is operating. <5> Put the module display side down on a flat horizontal plane. <6> Handle connectors and cables with care. <7> When the module is operating, do not lose CLK, Hsync, or Vsync signal. If any one of these signals is lost, the LCD panel would be damaged. <8> The torque for mounting screw should never exceed 0.294 N.m (3 kgf.cm). <9> Don’t push or rub the surface of LCD module please. If you do, the scratches or the marks like rubbing marks may be left on the surface of the module. <10> Do not give the stress to interface connectors. The module may become function by a contact defective and damages. Pay attention to handling at the time of matching connector connection and in the connection condition. (3) Cautions for the atmosphere <1> Dew drop atmosphere must be avoided. <2> Do not store and/or operate the LCD module in high temperature and/or high humidity atmosphere. Storage in an anti-static pouch and under the room temperature atmosphere is recommended. <3> This module uses cold cathod fluorescent lamps. Therefore, the life time of lamp becomes short if the module is operated under the low temperature environment. <4> 20 Do not operate the LCD module in high magnetic field. Data Sheet EN0510EJ1V0DS00 NL8060BC31-17 (4) Caution for the module characteristics <1> Do not apply any fixed patterns data for a long time to the LCD module. It may cause image sticking. Please use screen savers if the display pattern is fixed for a long time. <2> This module has the retardation film which may cause the variation of the color hue in the different viewing angles. The ununiformity may appear on the screen under the high temperature operation. <3> The light vertical stripe may be observed depending on the display pattern. This is not defects or malfunctions. <4> The noise from the inverter circuit may be observed in the luminance control mode. This is not defects or malfunctions. (5) Other cautions <1> Do not disassemble and/or reassemble LCD module. <2> Do not readjust variable resistors nor switches etc. <3> When returning the module for repair etc., Please pack the module properly to avoid any damages. We recommend the original shipping packages. Liquid Crystal Display has the following specific characteristics. There are not defects nor malfunctions. The optical characteristics of this module may be affected by the ambient temperature. The LCD module uses cold cathode tube for backlighting. Optical characteristics, like luminance or uniformity, will be changed by the progress in time. Uneven brightness and/or small spots may be observed depending on different display patterns. Data Sheet EN0510EJ1V0DS00 21 22 OUTLINE DRAWING FRONT SIDE (Unit in mm) 280 ± 0.5 272.2 ± 0.3 (140) ACTIVE AREA CENTER (0.1) (4.35) ACTIVE AREA (246∗184.5) 2.5 ± 0.3 (9) (4.5) (9) (105) 181.3 ± 0.3 210 ± 0.5 2.5 ± 0.3 4 − (φ 3.5) (4.5) (3.3) Note 1: The value in parentheses are for reference. Note 2: The torque to mounting screw never exceed 0.294 N.m (3kgf.cm). (9) (4.5) (3.3) (11.5) (13) 2.5 ± 0.3 13.7 MAX NL8060BC31-17 13.7 MAX (4.5) (9) BEZEL OPENING (249∗187.5) (4.5) Data Sheet EN0510EJ1V0DS00 MODULE CENTER 13.7 MAX (80) (1.6) (3.1) (3.3) (4.5) (3.3) (4.5) (4.5) 2.5 ± 0.3 (18.7) 13.7 MAX OUTLINE DRAWING REAR SIDE (Unit in mm) (5) (5) HIOK VOLTAGE CAUTION (5) (10) (5) (10) CN2 S (5) (10) Data Sheet EN0510EJ1V0DS00 156.4 ± 0.5 THE TFT COLOR LCD PANEL CONTAINS COLD CATHODE FLOURESCENT LAMPS. PLEASE FOLLOW LOCAL ORDINANCES OR REGULATIONS FOR ITS DISPOSAL CN1 NL8060BC31-17 MADE IN JAPAN (5) ES2228421 A100100100100 (5.4) (6.2) Note 1: The value in parentheses are for reference. Note 2: The torque to mounting screw never exceed 0.294 N.m (3kgf.cm). 23 NL8060BC31-17 2.2 ± 0.5 (5.4) (10) A 1 0 0 0 A 7 6 2 8 0 2 1/åíçí%&êìðìæ No part of this document may be copied in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or of others. While NEC Corporation has been making continuous effort to enhance the reliability of its Electronic Components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC Electronic Components, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. DATA SHEET