Production specification Surface Mount Rectifiers ES3AB--ES3JB FEATURES Pb z Low cost z Low leakage z Low forward voltage drop z High current capability z Easily cleaned with Alcohol ,Isopropanol and similar solvents z The plastic material carries U/L recognition 94V-0 Lead-free MECHANICAL DATA z Case: DO-214AA molded plastic z Terminals: Solder able per MIL- STD-202,Method 208 z Polarity: Color band denotes cathode Maximum Ratings(@TA = 25°C unless otherwise specified) Characteristic Symbol ES3AB ES3BB ES3CB ES3DB ES3GB ES3HB ES3JB UNITS Maximum recurrent peak reverse voltage VRRM 50 100 150 200 400 500 600 V Maximum RMS voltage VRMS 35 70 105 140 280 350 420 V Maximum DC blocking voltage VDC 50 100 150 200 400 500 600 V Maximum average forward rectified current @TA=100℃ IF(AV) 3.0 A IFSM 100 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load @TJ=125℃ Thermal Characteristics Characteristic Symbol ES3AB ES3BB ES3CB ES3DB ES3GB ES3HB ES3JB UNITS Typical junction capacitance (Note2) CJ 45 pF Typical thermal resistance (Note3) RθJA 25 ℃/W TJ - 55 ---- + 150 ℃ TSTG - 55 ---- + 150 ℃ Operating junction temperature range Storage temperature range Electrical Characteristics (@TA = 25°C unless otherwise specified) Characteristic Maximum instantaneous forward voltage at3.0 A Maximum reverse current at rated DC blocking voltage @TA=25℃ @TA=125℃ Maximum reverse recovery time (Note1) Symbol ES3AB VF IR trr ES3BB ES3CB ES3DB 0.95 ES3GB 1.25 ES3HB ES3JB UNITS 1.70 10 V μA 500 35 ns NOTE: 1. Measured with IF=0.5A, IR=1A, Irr=0.25A 2. Measured at 1.0MHZ and applied reverse voltage of 4.0VDC 3. Thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27''X0.27''(7.0X7.0mm2) copper pad areas Document Number: SMB103AA www.gmicroelec.com 1 Production specification Surface Mount Rectifiers ES3AB--ES3JB PACKAGE OUTLINE DIMENSIONS SMB I B A Min Max A 4.30 4.70 B 3.30 3.70 C 2.00 2.30 D 5.05 5.55 E 0.10 0.30 F 0.95 1.55 H C D Dim 0.20MAX H 2.10 2.50 I 1.85 2.15 E F G G All Dimensions in mm SOLDERING FOOTPRINT Unit ：mm PACKAGE INFORMATION Device Package Shipping ES3AB-ES3JB DO-214AA(SMB) 3000/Tape&Reel Document Number: SMB103AA www.gmicroelec.com 2 Production specification Surface Mount Rectifiers Document Number: SMB103AA ES3AB--ES3JB www.gmicroelec.com 3