FR301G THRU FR307G 3.0 AMPS. Glass Passivated Fast Recovery Rectifiers Voltage Range 50 to 1000 Volts Current 3.0 Amperes DO-201AD Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STD202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Mounting position: Any Weight: 1.2 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol FR FR Type Number 301G 302G Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 50 100 VDC Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 55℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 3.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance ( Note 3 ) Operating Temperature Range FR FR FR FR FR Units 303G 304G 305G 306G 307G 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V I(AV) 3.0 A IFSM 125 A VF 1.3 V IR 5.0 100 uA uA nS pF Trr Cj RθJA TJ 150 250 30 35 -65 to +150 -65 to +150 TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. Storage Temperature Range - 446 - 500 O C/W ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (FR301G THRU FR307G) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE trr +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 1cm FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 4 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT AMPERES FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 3 2 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375"(9.5mm) Lead Length 1 0 0 25 50 75 100 125 150 200 100 50 20 10 1 175 o AMBIENT TEMPERATURE. ( C) 2 4 6 8 10 20 40 NUMBER OF CYCLES AT 60Hz FIG.5- TYPICAL JUNCTION CAPACITANCE FIG.4- TYPICAL FORWARD CHARACTERISTICS 10 1000 Tj=25oC JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) SET TIME BASE FOR 5/ 10ns/ cm 1 0.1 0.01 0.4 100 10 0.6 0.8 1.0 1.2 1.4 1.6 1 FORWARD VOLTAGE. (V) 5 10 REVERSE VOLTAGE. (V) - 447 - 100 60 80 100