Vishay MAL209018222E3 Aluminum capacitors power ultra long life snap-in Datasheet

090 PUL-SI
www.vishay.com
Vishay BCcomponents
Aluminum Capacitors
Power Ultra Long Life Snap-In
FEATURES
• Long useful life: up to 5000 h at 105 °C
• Low ESR, high ripple current capability
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, very small dimensions, cylindrical
aluminum case, insulated with a blue sleeve
• Keyed polarity version available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
158
PUL-SI
miniaturized
090
PUL-SI
156
PUM-SI
85 °C
APPLICATIONS
• General purpose, industrial, telecom and audio/video
systems
• Smoothing and filtering
• Standard and switched mode power supplies
• Energy storage in pulse systems
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes 
(Ø D x L in mm)
Rated capacitance range
(E6/E12 series), CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 105 °C
Useful life at 105 °C
Useful life at 40 °C, 
1.9 x IR applied
Shelf life at 0 V, 105 °C
Based on sectional
specification
Climatic category IEC 60068
VALUE
22 x 25 to 35 x 40
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code (YYMM)
• Name of manufacturer
• Code for factory of origin
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number
• Climatic category in accordance with IEC 60068
560 μF to 47 000 μF
± 20 %
25 V to 100 V
- 40 °C to + 105 °C
2000 h
5000 h
125 000 h
500 h
IEC 60384-4/EN130300
40/105/56
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
560
680
1000
1200
16
-
25
-
35
-
40
-
50
-
63
-
80
22 x 25
22 x 30
25 x 30
1500
-
-
-
-
-
22 x 25
-
1800
-
-
-
-
-
-
2200
-
-
-
-
22 x 25
22 x 30
2700
3300
-
-
-
22 x 25
22 x 30
3900
-
-
-
22 x 30
25 x 30
4700
-
22 x 25
22 x 30
22 x 30
5600
6800
22 x 25
22 x 30
25 x 30
25 x 30
25 x 40
25 x 30
25 x 40
25 x 40
30 x 30
30 x 30
30 x 35
30 x 35
30 x 40
25 x 40
30 x 30
30 x 35
30 x 40
Revision: 13-Sep-12
25 x 30
25 x 40
25 x 40
30 x 30
-
100
22 x 25
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
-
35 x 40
-
-
-
Document Number: 28387
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
090 PUL-SI
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
16
25
35
8200
-
25 x 30
-
10 000
22 x 30
25 x 40
25 x 40
30 x 30
40
30 x 30
30 x 35
30 x 40
12 000
-
25 x 40
30 x 30
-
15 000
25 x 30
30 x 35
30 x 40
18 000
-
22 000
25 x 40
30 x 30
27 000
33 000
50
63
80
100
30 x 35
35 x 40
-
-
30 x 40
-
-
-
-
-
-
-
-
30 x 40
35 x 40
-
-
-
-
-
-
35 x 40
-
-
-
-
35 x 40
35 x 40
-
-
-
-
-
30 x 35
-
-
-
-
-
-
-
30 x 40
-
-
-
-
-
-
-
39 000
-
-
-
-
-
-
-
-
47 000
30 x 40
35 x 40
-
-
-
-
-
-
-
DIMENSIONS in millimeters AND AVAILABLE FORMS
TWO TERMINAL SNAP-IN
ØD
+ Terminal
L + 2 max.
L
10 ± 0.1
- Terminal
Bottom view
5.8
+0
- 1 mm
Ø 2 ± 0.1 (2 x)
The minus terminal can be marked with a black dot
or with an imprinted “-” sign.
Fig. 2 - Two terminal snap-in
Fig. 3 - Mounting hole diagram
THREE TERMINAL SNAP-IN
ØD
Ø 2 ± 0.1 (2 x)
Ø 2.5 ± 0.1
+ Terminal
L
L + 2 max.
- Terminal
Minus pole
marking
Bottom view
4 ± 0.5
The negative terminal has TWO pins which are BOTH
electrically connected
Fig. 4 - Three terminal snap-in
Revision: 13-Sep-12
3.3 ± 0.1
4.75 ± 0.1
The 10 mm spacing of the 2 pin
snap-in is used as the base layout
10 ± 0.1 and a third hole is added.
The third hole is closer to the
negative primary hole so that
polarization is always maintained,
together with added mechanical
stability.
Fig. 5 - Mounting hole diagram
Document Number: 28387
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
090 PUL-SI
www.vishay.com
Vishay BCcomponents
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
22 x 25
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
Ø Dmax.
Lmax.
MASS
(g)
PACKAGING QUANTITIES
(units per box)
23
23
26
26
31
31
31
36
27
32
32
42
32
37
42
42
12
16
22
27
30
35
40
55
100
100
100
100
100
100
100
50
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
CR
IR
IL5
ESR
Z
CARDBOARD BOX DIMENSIONS
LxWxH
(mm)
260 x 250 x 39
260 x 250 x 44
290 x 280 x 44
290 x 280 x 54
340 x 330 x 44
340 x 330 x 49
340 x 330 x 54
390 x 198 x 54
DESCRIPTION
Rated capacitance at 100 Hz
Rated RMS ripple current at 100 Hz or 10 kHz, 105 °C
Max. leakage current after 5 minutes at UR
Max. equivalent series resistance at 100 Hz (1)
Max. impedance at 10 kHz
Notes
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
(1) ESR at 120 Hz is approximately 0.95 x ESR 100 Hz
Electrolytic capacitor 090 series
3300 μF/80 V; ± 20 %
Nominal case size: Ø 30 mm x 40 mm
2-terminal snap-in:
Ordering code: MAL209032332E3
Former 12NC: 2222 09032332
3-terminal snap-in:
Ordering code: MAL209072332E3
Former 12NC: 2222 09072332
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
16
25
35
CR
100 Hz
(μF)
6800
10 000
15 000
22 000
22 000
27 000
33 000
47 000
4700
6800
8200
10 000
12 000
12 000
15 000
15 000
22 000
4700
6800
10 000
10 000
15 000
22 000
Revision: 13-Sep-12
NOMINAL
CASE SIZE
ØDxL
(mm)
22 x 25
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
22 x 25
22 x 30
25 x 30
25 x 40
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
22 x 30
25 x 30
25 x 40
30 x 30
30 x 40
35 x 40
IR
100 Hz
105 °C
(A)
2.8
3.4
3.6
4.5
3.7
4.2
4.7
4.8
2.6
3.2
3.4
4.3
4.3
3.7
4.2
4.8
5.1
2.8
3.0
3.9
3.2
4.1
4.2
IR
10 kHz
105 °C
(A)
3.3
4.0
4.3
5.5
4.5
5.1
5.6
5.8
3.1
3.8
4.1
5.1
5.2
4.5
5.1
5.7
6.1
3.4
3.6
4.7
3.9
4.9
5.0
ORDERING CODE
MAL2090.......
IL5
5 min
(μA)
MAX. ESR
100 Hz (1)
(m)
MAX. Z
10 kHz
(m)
2-TERM. SI
3-TERM. SI
222
324
484
708
708
868
1060
1508
236
341
411
501
601
601
751
751
1101
330
477
701
701
1051
1541
82
59
53
38
54
45
39
43
89
65
60
46
43
56
46
40
40
78
70
49
70
49
55
66
48
44
33
43
36
32
32
66
49
46
35
34
44
36
33
31
53
50
36
49
35
35
15682E3
15103E3
25153E3
25223E3
35223E3
35273E3
35333E3
45473E3
16472E3
16682E3
26822E3
26103E3
26123E3
36123E3
16153E3
36153E3
46223E3
10472E3
20682E3
20103E3
30103E3
30153E3
40223E3
55682E3
55103E3
65153E3
65223E3
75223E3
75273E3
75333E3
85473E3
56472E3
56682E3
66822E3
66103E3
66123E3
76123E3
56153E3
76153E3
86223E3
50472E3
60682E3
60103E3
70103E3
70153E3
80223E3
Document Number: 28387
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
090 PUL-SI
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
40
50
63
80
100
CR
100 Hz
(μF)
3300
3900
4700
5600
6800
8200
10 000
10 000
15 000
18 000
2200
3300
3900
4700
4700
5600
6800
8200
10 000
15 000
1500
2200
2700
3300
3900
3900
4700
4700
5600
6800
8200
820
1000
1500
2200
2200
2700
3300
4700
560
680
1000
1500
1500
1800
2200
3300
Revision: 13-Sep-12
NOMINAL
CASE SIZE
ØDxL
(mm)
22 x 25
22 x 30
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
35 x 40
22 x 25
22 x 30
25 x 30
25 x 30
25 x 40
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
22 x 25
22 x 30
25 x 30
25 x 40
25 x 40
30 x 30
30 x 30
30 x 35
30 x 35
30 x 40
35 x 40
22 x 25
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
22 x 25
22 x 30
25 x 30
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
IR
100 Hz
105 °C
(A)
2.4
2.9
2.9
3.1
3.9
3.3
3.8
4.3
4.5
4.3
2.1
2.6
2.8
2.9
3.6
3.6
3.1
3.5
4.0
4.0
2.1
2.6
2.8
3.5
3.6
3.1
3.1
3.6
3.5
4.0
4.3
1.5
1.8
2.1
2.8
2.5
2.8
3.2
3.4
1.4
1.6
1.9
2.5
2.3
2.6
3.0
3.2
IR
10 kHz
105 °C
(A)
2.9
3.4
3.5
3.7
4.7
3.9
4.5
5.1
5.4
5.1
2.6
3.2
3.4
3.5
4.3
4.4
3.7
4.2
4.7
4.9
2.5
3.1
3.4
4.2
4.3
3.8
3.7
4.3
4.2
4.7
5.1
1.8
2.1
2.6
3.3
3.0
3.4
3.8
4.1
1.6
1.9
2.3
3.1
2.7
3.2
3.6
3.8
ORDERING CODE
MAL2090.......
IL5
5 min
(μA)
MAX. ESR
100 Hz (1)
(m)
MAX. Z
10 kHz
(m)
2-TERM. SI
3-TERM. SI
265
313
377
449
545
657
801
801
1201
1441
221
331
391
471
471
561
681
821
1001
1501
190
279
342
417
493
493
594
594
707
858
1035
133
161
241
353
353
433
529
753
113
137
201
301
301
361
441
661
99
76
71
69
51
69
56
48
50
54
145
101
93
85
71
66
83
68
58
63
161
114
101
79
71
89
88
74
71
61
61
244
196
145
101
119
98
81
75
269
216
163
111
130
108
90
81
70
54
51
50
38
49
41
36
35
35
106
76
71
70
55
51
65
54
46
45
126
90
81
63
58
74
71
61
59
51
50
184
146
113
79
96
79
66
63
184
146
114
79
98
80
68
64
17332E3
17392E3
17472E3
27562E3
27682E3
37822E3
17103E3
37103E3
47153E3
47183E3
11222E3
11332E3
21392E3
31472E3
21472E3
21562E3
31682E3
31822E3
31103E3
41153E3
18152E3
18222E3
28272E3
28332E3
28392E3
38392E3
18472E3
38472E3
38562E3
38682E3
48822E3
12821E3
12102E3
22152E3
22222E3
32222E3
32272E3
32332E3
42472E3
19561E3
19681E3
29102E3
29152E3
39152E3
39182E3
39222E3
49332E3
57332E3
57392E3
57472E3
67562E3
67682E3
77822E3
57103E3
77103E3
87153E3
87183E3
51222E3
51332E3
61392E3
71472E3
61472E3
61562E3
71682E3
71822E3
71103E3
81153E3
58152E3
58222E3
68272E3
68332E3
68392E3
78392E3
58472E3
78472E3
78562E3
78682E3
88822E3
52821E3
52102E3
62152E3
62222E3
72222E3
72272E3
72332E3
82472E3
59561E3
59681E3
69102E3
69152E3
79152E3
79182E3
79222E3
89332E3
Document Number: 28387
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
090 PUL-SI
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Surge voltage
Us = 1.15 x UR
Urev 1 V
Reverse voltage
Current
Leakage current
After 1 min at UR
IL1  0.006 CR x UR + 4 μA
After 5 min at UR
IL5  0.002 CR x UR + 4 μA
Inductance
Equivalent series inductance (ESL)
Typ. 19 nH
All case sizes
Max. 25 nH
RIPPLE CURRENT AND USEFUL LIFE
MGA 454
2.7
IA
IR
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
2
1 2
1. 5
1.
1.8
life multiplier
2.
5
3
1.7
4
5
1.6
7
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz and 105 °C
(1)
Useful life at 105 °C and IR applied: 5000 h
20
30
40
60 0
10 0
15 0
20 0
30 0
40 0
60
1.4
1.3
10
15
1.5
1.2
1.1
1.0
0.8
0.5
0.0
40
50
60
(1)
70
80
90
100
110
Tamb (°C)
Fig. 6 - Multiplier of useful life as a function of ambient temperature and ripple current load
Revision: 13-Sep-12
Document Number: 28387
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
090 PUL-SI
www.vishay.com
Vishay BCcomponents
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
IR MULTIPLIER
FREQUENCY
(Hz)
UR = 25 V TO 100 V
50
0.91
100
1.00
200
1.05
400
1.09
1000
1.13
2000
1.15
4000
1.18
 10 000
1.22
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
REQUIREMENTS
C/C: ± 15 %
Endurance
IEC 60384-4/
EN130300
subclause 4.13
Tamb = 105 °C; UR applied; 
2000 h
ESR  1.3 x spec. limit
Z  2 x spec. limit
IL5  spec. limit
C/C: ± 20 %
ESR 3 x spec. limit
Z  3 x spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied; 
5000 h
IL5  spec. limit
no short or open circuit,
no visible damage
total failure percentage: 
UR:1 %
Shelf life
(storage at
high temperature)
Revision: 13-Sep-12
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
500 h
C/C: ± 15 %
after test: UR to be applied for 30 min, 
24 h to 48 h before measurement
IL5  2 x spec. limit
ESR 1.5 x spec. limit
Document Number: 28387
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages