PHILIPS BZA408B Quadruple bidirectional esd transient voltage suppressor Datasheet

DATA SHEET
book, halfpage
M3D302
BZA408B
Quadruple bidirectional ESD
transient voltage suppressor
Product specification
Supersedes data of 1998 Jun 05
1998 Oct 15
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
FEATURES
BZA408B
PINNING
• ESD rating >15 kV, according to IEC1000-4-2
PIN
• SOT457 surface mount package
DESCRIPTION
1
• Non-clamping range: −5 V to +5 V
cathode 1
2, 5
ground
• Channel separation: >70 dB
3
cathode 2
• Low reverse current: <100 nA
4
cathode 3
• Low diode capacitance: <75 pF.
6
cathode 4
APPLICATIONS
• Protection of equipment, connected to data and
transmission lines, against voltage surges caused by
electrostatic discharge e.g:
handbook, halfpage
6
5
4
1
2
3
6
5
1
2
4
– Computers and peripherals
– Audio and video equipment
– Communication systems
– Medical equipment
Top view
– Portable electronics.
3
MAM409
Marking code: Z8.
DESCRIPTION
Fig.1 Simplified outline (SOT457) and symbol.
4-bit wide monolithic bidirectional ESD transient voltage
suppressor in a six lead SOT457 (SC-74) package.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
Per diode (pin 2 and / or 5 connected to ground)
IZSM
non-repetitive peak reverse current
tp = 1 ms; square pulse; see Fig.2
−
2
A
PZSM
non-repetitive peak power
tp = 1 ms; square pulse
−
20
W
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−65
+150
°C
1998 Oct 15
2
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
BZA408B
THERMAL CHARACTERISTICS
SYMBOL
Rth j-s
PARAMETER
CONDITIONS
thermal resistance from junction to soldering point
VALUE
UNIT
340
K/W
MAX.
UNIT
one or more diodes loaded
ELECTRICAL CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
Per diode (pin 2 and / or 5 connected to ground)
−
5
V
5.5
−
V
VRWM
working reverse voltage
VR
reverse voltage
Itest = 5 mA
VZSM
non-repetitive peak reverse voltage
tp = 1 ms; IZSM = 2 A
−
10
V
IR
reverse current
VR = VRWM
−
100
nA
Cd
diode capacitance
see Fig.3
VR = 0; f = 1 MHz
−
75
pF
VR = 5 V; f = 1 MHz
−
55
pF
70
−
dB
αch (p to p)
pin to pin channel separation
note 1; see Fig.4
Note
1. αch (p to p) is measured as follows: a −7 dBs sinewave of 400 Hz is connected to e.g. pin 6 and a −7 dBs sinewave of
1 kHz to pin 1. The 1 kHz signal of pin 1 is measured on pin 6 by means of a spectrum analyser with an input
impedance of 1 MΩ. So αch (p to p) equals the 1 kHz level on pin 1 minus the 1 kHz level on pin 6. For the 400 Hz
signal the same measurement is done in the opposite way.
1998 Oct 15
3
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
BZA408B
GRAPHICAL DATA
MGR557
10
MGR558
80
handbook, halfpage
handbook, halfpage
Cd
(pF)
IZSM
(A)
60
1
40
10−1
10−2
10−1
20
1
tp (ms)
10
0
1
2
3
4
VR (V)
5
Tj = 25 °C; f = 1 MHz.
Fig.2
Maximum non-repetitive peak reverse
current as a function of pulse time.
Fig.3
Diode capacitance as a function of reverse
voltage; typical values.
handbook, full pagewidth
coaxial cable with
SMB connector
SPECTRUM
ANALYZER
1 MΩ
SIGNAL
GENERATOR
SIGNAL
GENERATOR
DUT
600 Ω
1
6
600 Ω
f = 1 kHz
−7 dBs
2
5
f = 400 Hz
−7 dBs
3
4
Fig.4 Channel separation measurement setup.
1998 Oct 15
4
MGR556
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
handbook, full pagewidthESD TESTER
450 Ω
RZ
BZA408B
RG 223/U
50 Ω coax
10×
ATTENUATOR
DIGITIZING
OSCILLOSCOPE
note 1
CZ
50 Ω
Note 1: attenuator is only used for open
socket high voltage measurements
IEC1000-4-2 network
CZ = 150 pF; RZ = 330 Ω
1/4 BZA408B
vertical scale = 100 V/Div
horizontal scale = 50 ns/Div
vertical scale = 10 V/Div
horizontal scale = 50 ns/Div
GND
GND
unclamped +1 kV ESD voltage waveform
(IEC1000-4-2 network)
clamped +1 kV ESD voltage waveform
(IEC1000-4-2 network)
GND
GND
vertical scale = 10 V/Div
horizontal scale = 50 ns/Div
vertical scale = 100 V/Div
horizontal scale = 50 ns/Div
unclamped −1 kV ESD voltage waveform
(IEC1000-4-2 network)
clamped −1 kV ESD voltage waveform
(IEC1000-4-2 network)
Fig.5 ESD clamping test set-up and waveforms.
1998 Oct 15
5
MGR560
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
BZA408B
APPLICATION INFORMATION
Typical bidirectional application
A quadruple bidirectional transient suppressor in a SOT457 package makes it possible to protect four separate lines
using only one package. One simplified example is shown in Fig.6.
handbook, full pagewidth
audio in L
audio in R
audio out L
audio out R
TVSET/VCR
SCART
CONNECTOR
BZA408B
GND
MGR559
Fig.6 Scart connector protection.
Device placement and printed-circuit board layout
Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA408B is
determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further
add to the clamping voltage (V = L di/dt) the series conductor lengths on the printed-circuit board should be kept to a
minimum. This includes the lead length of the suppression element.
In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended:
1. Place the suppression element close to the input terminals or connectors.
2. Keep parallel signal paths to a minimum.
3. Avoid running protection conductors in parallel with unprotected conductors.
4. Minimize all printed-circuit board loop areas including power and ground loops.
5. Minimize the length of the transient return path to ground.
6. Avoid using shared transient return paths to a common ground point.
1998 Oct 15
6
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
BZA408B
PACKAGE OUTLINE
Plastic surface mounted package; 6 leads
SOT457
D
E
B
y
A
HE
6
X
v M A
4
5
Q
pin 1
index
A
A1
1
2
bp
e
c
3
Lp
w M B
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
bp
c
D
E
e
HE
Lp
Q
v
w
y
mm
1.1
0.9
0.1
0.013
0.40
0.25
0.26
0.10
3.1
2.7
1.7
1.3
0.95
3.0
2.5
0.6
0.2
0.33
0.23
0.2
0.2
0.1
OUTLINE
VERSION
SOT457
1998 Oct 15
REFERENCES
IEC
JEDEC
EIAJ
SC-74
7
EUROPEAN
PROJECTION
ISSUE DATE
97-02-28
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
BZA408B
DEFINITIONS
Data Sheet Status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1998 Oct 15
8
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
NOTES
1998 Oct 15
9
BZA408B
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
NOTES
1998 Oct 15
10
BZA408B
Philips Semiconductors
Product specification
Quadruple bidirectional ESD transient
voltage suppressor
NOTES
1998 Oct 15
11
BZA408B
Philips Semiconductors – a worldwide company
Argentina: see South America
Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113,
Tel. +61 2 9805 4455, Fax. +61 2 9805 4466
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 160 1010,
Fax. +43 160 101 1210
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 200 733, Fax. +375 172 200 773
Belgium: see The Netherlands
Brazil: see South America
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 689 211, Fax. +359 2 689 102
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Colombia: see South America
Czech Republic: see Austria
Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S,
Tel. +45 32 88 2636, Fax. +45 31 57 0044
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615800, Fax. +358 9 61580920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 40 99 6161, Fax. +33 1 40 99 6427
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 23 53 60, Fax. +49 40 23 536 300
Greece: No. 15, 25th March Street, GR 17778 TAVROS/ATHENS,
Tel. +30 1 4894 339/239, Fax. +30 1 4814 240
Hungary: see Austria
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Indonesia: PT Philips Development Corporation, Semiconductors Division,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3,
20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5077
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381
Middle East: see Italy
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Pakistan: see Singapore
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA,
Tel. +48 22 612 2831, Fax. +48 22 612 2327
Portugal: see Spain
Romania: see Italy
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000,
Tel. +27 11 470 5911, Fax. +27 11 470 5494
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2865, Fax. +886 2 2134 2874
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Turkey: Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL,
Tel. +90 212 279 2770, Fax. +90 212 282 6707
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381
Uruguay: see South America
Vietnam: see Singapore
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 625 344, Fax.+381 11 635 777
For all other countries apply to: Philips Semiconductors,
International Marketing & Sales Communications, Building BE-p, P.O. Box 218,
5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
Internet: http://www.semiconductors.philips.com
© Philips Electronics N.V. 1998
SCA60
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
115104/00/02/pp12
Date of release: 1998 Oct 15
Document order number:
9397 750 04313
Similar pages