Mean Well GS25A18-P1J 20~25wac-dc single output desktop Datasheet

GS25A
20~25W AC-DC Single Output Desktop
series
Features :
Universal AC input / Full range
No load power consumption<0.3W
ErP step2 compliant
NRCan compliant
Meet EISA 2007 (Energy Independence and Security Act)
3 pole AC inlet IEC320-C14
Class power ( with earth pin)
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: UL / CUL / TUV / BSMI / CCC / PSE / CB / FCC / CE
Pass LPS
2 years warranty
(for 5V~28V only)
SPECIFICATION
ORDER NO.
GS25A05-P1J GS25A07-P1J GS25A09-P1J GS25A12-P1J GS25A15-P1J GS25A18-P1J GS25A24-P1J GS25A28-P1J GS25A48-P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
GS25A05
Note.2 5V
GS25A07
GS25A09
GS25A12
GS25A15
GS25A18
GS25A24
GS25A28
7.5V
9V
12V
15V
18V
24V
28V
48V
0.52A
RATED CURRENT
4.0A
2.93A
2.77A
2.08A
1.66A
1.38A
1.04A
0.89A
CURRENT RANGE
0 ~ 4.0A
0 ~ 2.93A
0 ~ 2.77A
0 ~ 2.08A
0 ~ 1.66A
0 ~ 1.38A
0 ~ 1.04A
0 ~ 0.89A
0 ~ 0.52A
RATED POWER (max.)
20W
22W
25W
25W
25W
25W
25W
25W
25W
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
80mVp-p
80mVp-p
80mVp-p
VOLTAGE TOLERANCE Note.4
RIPPLE & NOISE (max.) Note.3 50mVp-p
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
85.5%
85.5%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
INPUT
78.5%
AC CURRENT
INRUSH CURRENT (max.)
0.7A / 100VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note. 7)
EMC EMISSION
EMC IMMUNITY
CONNECTOR
NOTE
81.5%
82.5%
84.5%
84.5%
84.5%
87%
45A / 230VAC
0.75mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode
0 ~ +50 (Refer to "Derating Curve")
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0~50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, PSE J60950-1(5~28V only), CCC GB4943 approved
I/P-O/P:4242VDC, I/P-FG:2121VDC
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254
Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
PACKING
PLUG
500Khrs min. MIL-HDBK-217F(25
93*54*36mm (L*W*H)
230g ; 60pcs / 15kg / CARTON
See page2
CABLE
See page2
MTBF
DIMENSION
500ms, 20ms, 15ms/115VAC at full load
47 ~ 63Hz
EFFICIENCY (Typ.)
LEAKAGE CURRENT(max.)
OTHERS
GS25A48
)
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the
EMC directives.
File Name:GS25A-SPEC 2012-02-29
GS25A
20~25W AC-DC Single Output Desktop
Mechanical Specification
series
Unit:mm
UL1185 16AWG 1230 50mm for 5V~12V
UL1185 18AWG 1830 50mm for 15V~48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
36
93
Standard plug: P1J
54
P1J
OUTPUT
CENTER
+
Static Characteristics
Derating Curve
100
100
LOAD (%)
LOAD (%)
P/N
70
0
10
20
30
Ta (
40
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:GS25A-SPEC 2012-02-29
Similar pages