Connor-Winfield OFB3JP2AB-012.8M 3.3v surface mount lvcmos stratum 3 ocxo Datasheet

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX
(630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ABSOLUTE M AXIMUM RATING S
PARAMETER
TABLE 1.0
UNITS
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
125
°C
-0.5
-
4.5
Vdc
MINIMUM
NOMINAL
UNITS
1.544
-
MAXIMUM
20.0
Storage Temperature
Supply Voltage
(Vcc)
OPERATING SPECIFIC ATIONS
NOTE
OFB3JP2AB
TABLE 2.0
PARAMETER
Center Frequency
(Fo)
NOTE
DESCRIPTION
MHz
0.5
ppm
1,4
Frequency Stability
-0.20
-
0.20
ppm
2
Total Frequency Tolerance
Aging (Daily)
Aging (1st year)
Aging (20 years)
Operating Temperature Range
-4.6
-10
-0.5
-4.0
-40
-
ppm
ppb
ppm
ppm
°C
3
4
-
4.6
10
0.5
4.0
85
3.135
-
3.3
-60
-90
-120
-140
-145
-150
-
3.465
700
1
50
5
Vdc
mA
ps RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
Minutes
Frequency Calibration
-0.5
Supply Voltage
Supply Current
Jitter (BW =10KHz to Fo/2)
SSB Phase Noise at 1 Hz offset
SSB Phase Noise at 10 Hz offset
SSB Phase Noise at 100 Hz offset
SSB Phase Noise at 1 KHz offset
SSB Phase Noise at 10 KHz offset
SSB Phase Noise at 100 KHz offset
Start-Up Time: Oscillator
Warm Up Time
(Vcc)
(Icc)
PARAMETER
The Connor-Winfield
OFB3JP2AB is a true Surface
Mount 3.3V Oven Controlled
Crystal Oscillator (OCXO)
with an LVCMOS output. The
OFB3JP2AB is designed for
Stratum 3 applications
requiring tight frequency
stability and low jitter.
FEATURES
FIXED FREQUENCY OCXO
5
3.3V OPERATION
LVCMOS OUTPUT CHARACTERISTICS
LOAD
Voltage
TABLE 3.0
MINIMUM
NOMINAL
MAXIMUM
UNITS
12
3.0
-4
45
-
15
50
-
18
0.4
4
55
6
pF
Vdc
Vdc
mA
mA
%
ns
LOW JITTER <1pS RMS
NOTE
FREQUENCY STABILITY: ±0.20ppm
(High)
(Low)
Current
(High)
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
(Voh)
(Vol)
(Ioh)
(Iol)
PACKAG E CHARACTERISTICS
TABLE 4.0
Surface Mount, Non-hermetic package consisting of an FR4 substrate with
grounded metal cover.
Package
PROCESS RECOMMENDATIONS
Soldering Process
Wash
TEMPERATURE RANGE: -40 to 85°C
FREQUENCY TOLERANCE: ±4.6ppm
OVER 20 YEARS
SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / LEAD FREE
TABLE 5.0
See solder profile on page 2.
Ultrasonic cleaning is not recommended
Notes:
1) Initial calibration @ 25°C
2) Frequency vs. temperature stability, peak to peak, -40 to 85°C.
3) Inclusive of calibration, operating tem perature range, supply voltage chang e, shock and
vibration and aging (20 years).
4) Specifications at time of shipm ent after 48 hours of operation.
5) Measured @ 25°C, within 5 minutes, the unit will be within +/-0.1ppm of its reference
frequency, measured after 30 m inutes of continuous operation at a st able 25°C.
DATA SHEET #:
0644
OFB3JP2AB
12.80 MHZ
3.3V SURFACE MOUNT LVCMOS STRATUM 3 OCXO
Cx108
PAGE 1
OF
2
REV: 03
DATE:
04/26/07
ORDERING INFORMATION
OFB3JP2AB - 012.8M
OCXO
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX
(630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D ATA
SHEET
CRYSTAL CONTROLLED OSCILLATORS
ENVIRONMENTAL CHARACTERISTICS
Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55°C to 125°C, 300 cycles, 10 minute dwell, 1 minute
transition.
MECHANICAL CHARACTERISTICS
Vibration: Per MIL-STD-202, Method 204, Condition A. 10G’s peak, 10Hz to 500Hz, 15 minute cycles, 12 times each
perpendicular axis.
Shock: Per MIL-STD-202, Method 213, Condition F. 1500G’s, 1.0ms, half sine, 3 shocks per direction.
Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65°C, 10 cycles 10°C to 65°C.
Pin Connections
Solder Profile
TABLE 6.0
Function
N/C
N/C
Vcc
Output
N/C
N/C
Ground (Case)
Pin
1
2
3
4
5
6
7
Package Drawing
7
0644
OFB3JP2AB
12.8 MHZ
1
2
Temperatures are measured at the OCXO
6
5
4
3
Output Waveform
0.590 +/-.008
(15.0 +/-0.2mm)
1.010 MAX
(25.7mm)
90%
.100
(2.5mm)
4
3
50%
.880 MAX
(22.35mm)
.350
(8.89mm)
5
.300
(7.62mm)
2
10%
.700
(17.8mm)
6
1
.110
(2.79mm)
2
7
6
.350
(8.89mm)
3
5
R .030
(.75mm)
7
Suggested Pad Layout
Test Circuit
1
.100
(2.5mm)
4
.810
(20.57mm)
.110
(2.79mm)
1.010
(25.65mm)
.110
(2.79mm)
.200
(5.08mm)
.110
(2.79mm)
.300
(7.62mm)
.350
(8.89mm)
.200
(5.08mm)
Specifications subject to change without notice.
DATA SHEET #:
Cx108
PAGE 2
OF
2
REV: 03
DATE:
04/26/07
aCopyright 2001 Connor-Winfield all rights reserved.
Similar pages