Panasonic EEHZA1E560P Conductive polymer hybrid aluminum electrolytic capacitors/za Datasheet

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
Surface Mount Type
Series:
ZA
Type:
V
High temperature Lead-Free reflow
■ Features
● Endurance: 10000 h at 105 °C
● Low ESR and High ripple current
(70 % over, Lower ESR than Current V-FP)
● High voltage (to 80 V)
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● AEC-Q200 qualified ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–55 °C to +105 °C
25 V.DC to 80 V.DC
10 μF to 330 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
DC Leakage Current
tan d
Please see the attached Standard Products list
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for 10000
hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
Capacitance change
tan d
E. S. R.
DC leakage current
Endurance
±30 % of initial measured value
< 200 % of initial specified value
< 200 % of initial specified value
< initial specified value
Size Code
C
D
D8
2.0
1.4
0.8
ESR after Endurance
(Ω/100 kHz) (–40 °C)
F
0.4
G
0.3
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Frequency (Hz)
120
0.10
Correction factor
100 k to
1.00
■ Dimensions in mm (not to scale)
Series identification
L
Pressure Relief (010 and larger)
Rated Voltage Mark
Size
code
Lot number
Rated Voltage Mark
25 V
35 V
50 V
J
K
63 V
80 V
D
L
A, B
C
5.0 5.8±0.3 5.3
D
6.3 5.8±0.3 6.6
D8 6.3 7.7±0.3 6.6
F
8.0 10.2±0.3 8.3
G 10.0 10.2±0.3 10.3
K
(P)
+
(I)
0D±0.5
Capacitance (μF)
& ;"
A±0.2
–
Negative polarity marking (–)
(Unit : mm)
(I)
0.3 max.
Marking color : BLACK
H
Example:25 V 33 μF
E
V
H
10 k
0.60
B±0.2
■ Marking
1k
0.30
W
( ) Reference size
H
I
W
P
K
6.5 max.
7.8 max.
7.8 max.
10.0 max.
12.0 max.
2.2
2.6
2.6
3.4
3.5
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
1.5
1.8
1.8
3.1
4.6
0.15
0.35 +- 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 +- 0.20
0.70±0.2
0.70±0.2
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-2 –
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
■ Standard Products
Endurance : 105 °C 10000 h
Case size
W.V.
(V)
25
35
50
63
80
Cap.
(±20 %)
(μF)
33
Dia.
Length
(mm)
5
(mm)
5.8
Min.
Packaging Q'ty
Specification
Size
Code
C
Ripple
Current
(100 kHz)
(+105 °C)
(mA r.m.s.)
900
E.S.R.
tan d
(100 kHz)
(+20 °C)
(mΩ)
80
(120 Hz)
(+20 °C)
0.14
Part No.
Reflow
(RoHS:compliant)
EEHZA1E330R
Taping
(5)
(pcs)
1000
56
6.3
5.8
D
1300
50
0.14
EEHZA1E560P
(5)
1000
100
6.3
7.7
D8
2000
30
0.14
EEHZA1E101XP
(5)
900
220
8
10.2
F
2300
27
0.14
EEHZA1E221P
(6)
500
330
10
10.2
G
2500
20
0.14
EEHZA1E331P
(6)
500
22
5
5.8
C
900
100
0.12
EEHZA1V220R
(5)
1000
27
6.3
5.8
D
1300
60
0.12
EEHZA1V270P
(5)
1000
47
6.3
5.8
D
1300
60
0.12
EEHZA1V470P
(5)
1000
68
6.3
7.7
D8
2000
35
0.12
EEHZA1V680XP
(5)
900
500
150
8
10.2
F
2300
27
0.12
EEHZA1V151P
(6)
270
10
10.2
G
2500
20
0.12
EEHZA1V271P
(6)
500
10
5
5.8
C
750
120
0.10
EEHZA1H100R
(5)
1000
22
6.3
5.8
D
1100
80
0.10
EEHZA1H220P
(5)
1000
33
6.3
7.7
D8
1600
40
0.10
EEHZA1H330XP
(5)
900
500
68
8
10.2
F
1800
30
0.10
EEHZA1H680P
(6)
100
10
10.2
G
2000
28
0.10
EEHZA1H101P
(6)
500
5.8
D
1000
120
0.08
EEHZA1J100P
(5)
1000
10
6.3
22
6.3
7.7
D8
1500
80
0.08
EEHZA1J220XP
(5)
900
33
8
10.2
F
1700
40
0.08
EEHZA1J330P
(6)
500
56
10
10.2
G
1800
30
0.08
EEHZA1J560P
(6)
500
22
8
10.2
F
1550
45
0.08
EEHZA1K220P
(6)
500
33
10
10.2
G
1700
36
0.08
EEHZA1K330P
(6)
500
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-3 –
Similar pages