Nichicon LAD2E151MELZ Aluminum electrolytic capacitor Datasheet

ALUMINUM ELECTROLYTIC CAPACITORS
AD
Snap-in Terminal Type, Withstanding Overvoltage series
series
Withstanding 3000 hours application of rated ripple current at 105°C.
Suited for 100V/200V switch-over use in switching power supplies.
Withstanding overvoltage and suited for IEC-60950 application.
Adapted to the RoHS directive (2002/95/EC).
AD
Withstandard
overvoltage
GU
a
Specifications
Performance Characteristics
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
– 40 ~ +105°C
250V
82 ~ 1200µF
± 20% at 120Hz, 20°C
I 3 CV ( µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.15MAX. 120Hz,20°C
Stability at Low Temperature
Rated voltage(V)
Z – 25°C/Z+20°C
Impedance ratio ZT/Z20 (MAX.)
Z – 40°C/Z+20°C
Endurance
After an application of DC voltage (in the range of rated DC voltage
even after over-lapping the specified ripple current)for 3000 hours
at 105°C, capacitors meet the characteristic requirements listed at
right.
Capacitance change
tan δ
Leakage current
Within ±20% of intial value
200% or less of intial spesified value
Initial specified value or less
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours,
and after performing voltage treatment based on JIS C 5101-4 clause
4.1 at 20°C, they will meet the requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±15% of intial value
150% or less of intial spesified value
Initial specified value or less
Withstand excess voltage
Marking
Not defective after 7 hours continuous charges of 360VDC at 70°C atmosphere.
Printed with white color letter on black sleeve.
Measurement frequency:120Hz
250
3
12
Type numbering system (Example : 250V 560 µF)
Drawing
1 2 3 4 5 6 7 8 9 10 11 12
Polarity bar
Sleeve (P.E.T.)
10±0.1
.2
+0
0.8 -0.1
LAD 2E 5 6 1 MEL A
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (560µF)
Rated voltage (250V)
Series name
Type
4.0±0.5
2.5
f
D +1MAX.
2- f 2.0 ±0.1
10
L±2
Pressure relief vent
0.8+0.2
-0.1
1.5 +0.2
-0.1
4.0±0.5
(PC board hole dimensions)
(Terminal dimensions)
Case dia. code
D Code
20
Y
22
Z
25
A
30
B
35
C
f
The other terminal is also available upon request.
Please refer page 237 for schematic of dimensions.
Dimensions
250V (2E)
25
V(Code)
Code
Cap.(µF)
0082
0100
0120
0150
0180
0220
0270
0330
0390
0470
0560
0680
0820
1000
1200
φD
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
20
20 × 20
20 × 25
20 × 25
20 × 30
20 × 35
20 × 40
20 × 45
20 × 50
22
0.42
0.53
0.65
0.79
0.90
1.00
1.15
1.30
22 × 20
22 × 25
22 × 25
22 × 25
22 × 30
22 × 35
22 × 40
22 × 45
Frequency coefficient of rated ripple current
Frequency (Hz)
Coefficient
50
0.81
60
0.85
120
1.00
300
1.17
1k
1.32
10k
1.45
50k~
1.50
0.53
0.65
0.79
0.90
1.00
1.15
1.30
1.49
25 × 20
25 × 25
25 × 25
25 × 25
25 × 30
25 × 35
25 × 40
25 × 45
25 × 50
30
0.65
0.79
0.90
1.00
1.15
1.30
1.49
1.65
1.80
30 × 20
30 × 25
30 × 25
30 × 25
30 × 30
30 × 35
30 × 40
30 × 45
30 × 50
35
0.90
1.00
1.15
1.30
1.49
1.65
1.80
2.00
2.30
35 × 20
35 × 25
35 × 25
35 × 25
35 × 30
35 × 35
35 × 40
35 × 45
35 × 50
Case size
φ D × L (mm)
1.15
1.30
1.49
1.65
1.80
2.00
2.30
2.47
2.60
Rated
ripple
Rated Ripple (Arms) at 105°C 120Hz
Minimum order quantity : 50pcs.
CAT.8100V
Similar pages