UMS CHA6005-QEG 8-12ghz high power amplifier Datasheet

CHA6005-QEG
8-12GHz High Power Amplifier
GaAs Monolithic Microwave IC
Description
The CHA6005-QEG is a high power amplifier
monolithic circuit, which integrates two
stages and produces 31.5dBm output power
associated to a high power added efficiency
of 33%.
It is designed for a wide range of
applications, from professional to commercial
communication systems.
The circuit is manufactured with a pHEMT
process, 0.25µm gate length, via holes
through the substrate, air bridges and
electron beam gate lithography.
It is supplied in a RoHS compliant SMD
package.
50
Main Features
0.7
45
40
0.6
35
30
0.5
25
20
0.4
15
10
Idrain @ 1dBcomp (A)
Pout @ 1dBcomp (dBm) &
Linear Gain (dB)
■ High power: 31.5dBm
■ High PAE: 33%
■ Frequency band: 8-12GHz
■ Linear gain: 20dB
■ DC bias: VD=8Volt@Id=420mA
■ 24L-QFN4x5
■ MSL3
0.3
5
Pout_1dBcomp
Linear Gain
ID (A)
0
0.2
7
8
9
10
11
Frequency (GHz)
12
13
Main Electrical Characteristics
Tamb.= +25°C
Symbol
Parameter
Freq
Frequency range
G
Linear Gain
P1dB
Output Power @ 1dB comp.
PAE1dB Power Added Efficiency @ 1dB comp.
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
1/12
Min
8
Typ
Max
12
20
31.5
33
Unit
GHz
dB
dBm
%
Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Electrical Characteristics
Tamb.= +25°C, VD1,2 = +8.0V
Symbol
Parameter
Min
Freq
Operating frequency
8
G
Small signal gain
RLin
Input Return Loss
RLout
Output Return Loss
P1dB
Output power @ 1dBcomp
P3dB
Output power @ 3dBcomp
PAE1dB
Power Added Efficiency @ 1dBcomp
PAE3dB
Power Added Efficiency @ 3dBcomp
Id_1dBcomp
Supply drain current @ 1dBcomp
Id_3dBcomp
Supply drain current @ 3dBcomp
Idq
Supply quiescent current
VG
Gate supply voltage
These values are representative of onboard measurements and are
plan as defined in the paragraph "Definition of reference planes ".
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
2/12
Typ
Max
12
Unit
GHz
19.5
dB
14
dB
10
dB
31.5
dBm
32
dBm
33
%
35
%
500
mA
550
mA
420
mA
-0.7
V
defined in the reference
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Absolute Maximum Ratings (1)
Tamb.= +25°C
Symbol
Parameter
Values
Unit
VD
Drain bias voltage
9.0
V
Id
Drain bias current
700
mA
VG
Gate bias voltage
-0.25
V
Pin
Maximum peak input power overdrive
+18
dBm
Tj
Junction temperature
175
°C
Ta
Operating temperature range
-40 to +85
°C
Tstg
Storage temperature range
-55 to +150
°C
(1)
Operation of this device above anyone of these parameters may cause permanent
damage.
Typical Bias Conditions
Tamb.= +25°C
Symbol
Pad No
VD1,2
17, 13
VG12
18
Parameter
Drain supply voltage
Gate supply voltage
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
3/12
Values
8
-0.7
Unit
V
V
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Device Thermal Performances
All the figures given in this section are obtained assuming that the QFN device is only cooled
down by conduction through the package thermal pad (no convection mode considered).
The temperature is monitored at the package back-side interface (Tcase) as shown below.
The system maximum temperature must be adjusted in order to guarantee that Tcase
remains below the maximum value specified in the next table. So, the system PCB must be
designed to comply with this requirement.
A derating must be applied on the dissipated power if the Tcase temperature cannot be
maintained below the maximum temperature specified (see the curve Pdiss. Max) in order to
guarantee the nominal device life time (MTTF).
DEVICE THERMAL SPECIFICATION : CHA6005-QEG
Recommended max. junction temperature (Tj max)
:
173
Tj absolute maximum rating for 20 years minimum life time
:
175
Max. continuous dissipated power (Pdiss. Max.)
:
2.9
=> Pdiss. Max. derating above Tcase(1)= 85
°C :
33
(2)
Junction-Case thermal resistance (Rth J-C)
:
<30
Minimum Tcase operating temperature(3)
:
-40
Maximum Tcase operating temperature(3)
:
85
Minimum storage temperature
:
-55
Maximum storage temperature
:
150
°C
°C
W
mW/°C
°C/W
°C
°C
°C
°C
(1) Derating at junctio n temperature co nstant = Tj max.
(2) Rth J-C is calculated fo r a wo rst case co nsidering the ho t t e s t junc t io n o f the M M IC and all the devices biased.
(3) Tcase=P ackage back side temperature measured under the die-attach-pad (see the drawing belo w).
3.5
2.5
2
1.5
1
0.5
Pdiss. Max. @Tj <Tj max (W)
0
-50
-25
0
25
50
75
100
125
150
175
Pdiss. Max. @Tj <Tj max (W)
3
Tcase
Example: QFN 16L 3x3
Location of temperature
reference point (Tcase)
on package's bottom side
Tcase (°C)
6.4
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
4/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Typical Board Measurements
Temperature : -40, +25, +85°C
VD1,2 = 8V, Id (Quiescent) = 420mA, CW mode
Linear Gain versus Frequency and Temperature
25
24
Linear Gain (dB)
23
22
21
20
19
18
17
-40 C
16
+85 C
+25 C
15
7
8
9
10
11
12
13
Frequency (GHz)
Output Power at 3dBcomp versus Frequency and Temperature
35
34
33
Pout (dBm)
32
31
30
29
28
Temp=-40 C & Pin=13dBm
27
Temp=+25 C & Pin=15dBm
26
Temp=+85 C & Pin=17dBm
25
7
8
9
10
11
12
13
Frequency (GHz)
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
5/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Typical Board Measurements
Temperature : -40, +25, +85°C
VD1,2 = 8V, Id (Quiescent) = 420mA, CW mode
Power added efficiency at 3dBcomp versus Frequency and Temperature
50
45
40
PAE (%)
35
30
25
20
15
Temp=-40 C & Pin=13dBm
10
Temp=+25 C & Pin=15dBm
5
Temp=+85 C & Pin=17dBm
0
7
8
9
10
11
12
13
Frequency (GHz)
Drain current at 3 dBcomp versus Frequency and Temperature
1.0
0.9
Drain current (A)
0.8
0.7
0.6
0.5
0.4
0.3
Temp=-40°C & Pin=13dBm
0.2
Temp=+25°C & Pin=15dBm
0.1
Temp=+85°C & Pin=17dBm
0.0
7
8
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
9
10
11
Frequency (GHz)
6/12
12
13
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Typical Board Measurements
Temperature : +25°C
VD1,2 = 8V, Id (Quiescent) = 420mA, CW mode
Output Power versus Input Power and Frequency
Power added efficiency versus Input Power and Frequency
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
7/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Package Outline (1)
Matt tin, Lead Free
Units :
From the standard :
(Green)
mm
JEDEC MO-220
(VGHD)
GND
1- Nc
13- VD2
2- Nc
14- Nc
3- Nc
15- Gnd (2)
4- Nc
16- Nc
255- Nc
17- VD1
6- Nc
18- VG1
7- Nc
19- Nc
8- Nc
20- Nc
(2)
9- Gnd
21- Gnd (2)
10- RF OUT
22- RF IN
(2)
11- Gnd
23- Gnd (2)
12- Nc
24- Nc
(1)
The package outline drawing included to this data-sheet is given for indication. Refer to the
application note AN0017 (http://www.ums-gaas.com) for exact package dimensions.
(2)
It is strongly recommended to ground all pins marked “Gnd” through the PCB board.
Ensure that the PCB board is designed to provide the best possible ground to the package.
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
8/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Definition of the Reference Planes
The
reference
planes
used
for
measurements given above are symmetrical
from the axis of the package (see drawing
beside). The input and output reference
planes are located at 3.7mm offset (input
wise and output wise respectively) from this
axis. Then, the given Sij parameters
incorporate the land pattern of the evaluation
motherboard recommended in paragraph
"Evaluation mother board".
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
9/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Evaluation Mother Board
■ Compatible with the proposed footprint.
■ Based on typically Ro4003 / 8mils or equivalent.
■ Using a micro-strip to coplanar transition to access the package.
■ Recommended for the implementation of this product on a module board.
■ Decoupling capacitors of 100pF + 10nF recommended on VG12, VD1,2 in CW mode.
■ Decoupling capacitors of 100pF + 10nF recommended on VG12 in pulsed drain mode.
■ Decoupling capacitors of 100pF + 10nF recommended on VD1,2 in pulsed drain mode.
■ See application note AN0017 for details.
Recommended Test fixture for measurements over temperature range
10nF
100pF
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
100pF
100pF
10/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
DC Schematic
8V, 420mA
VG1
VD1
VG2
VD2
400 Ω
400 Ω
400 Ω
400 Ω
OUT
IN
Package Information
Parameter
Package body material
Lead finish
MSL Rating
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
Value
RoHS-compliant
Low stress Injection Molded Plastic
100% matte tin ( Sn)
MSL3
11/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
CHA6005-QEG
8-12GHz High Power Amplifier
Recommended package footprint
Refer to the application note AN0017 available at http://www.ums-gaas.com for package foot
print recommendations and exact package dimensions.
SMD mounting procedure
For the mounting process standard techniques involving solder paste and a suitable reflow
process can be used. For further details, see application note AN0017 available at
http://www.ums-gaas.com.
Recommended environmental management
UMS products are compliant with the regulation in particular with the directives RoHS
N°2011/65 and REACh N°1907/2006. More environmental data are available in the
application note AN0019 also available at http://www.ums-gaas.com.
Recommended ESD management
Refer to the application note AN0020 available at http://www.ums-gaas.com for ESD
sensitivity and handling recommendations for the UMS package products.
Recommended thermal management
Refer to the application note AN0018 available at http://www.ums-gaas.com for thermal
management recommendations.
Ordering Information
QFN Package:
CHA6005-QEG/XY
Stick: XY = 20
Tape & reel: XY = 21
Information furnished is believed to be accurate and reliable. However United Monolithic Semiconductors
S.A.S. assumes no responsibility for the consequences of use of such information nor for any infringement of
patents or other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of United Monolithic Semiconductors S.A.S.. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all
information previously supplied. United Monolithic Semiconductors S.A.S. products are not authorised for use
as critical components in life support devices or systems without express written approval from United
Monolithic Semiconductors S.A.S.
Ref. : DSCHA6005-QEG5070 – 11 Mar 15
12/12
Specifications subject to change without notice
Bât. Charmille - Parc SILIC - 10, Avenue du Québec - 91140 VILLEBON-SUR-YVETTE - France
Tel.: +33 (0) 1 69 86 32 00 - Fax: +33 (0) 1 69 86 34 34
Similar pages