ON NCP3712ASNT1 Over voltage protected high side switch Datasheet

NCP3712ASNT1
Over Voltage Protected
High Side Switch
This switch is primarily intended to protect loads from transients by
isolating the load from the transient energy rather than absorbing it.
Features
http://onsemi.com
• Capable of Switching Loads of up to 200 mA without External
•
•
•
•
•
•
•
•
•
MARKING
DIAGRAM
Rboost
Switch Shuts Off in Response to an Over Voltage Input Transient
Features Active Turn Off for Fast Input Transient Protection
Flexible Over Voltage Protection Threshold Set with External Zener
Automatic Recovery after Transient Decays Below Threshold
Withstands Input Transients up to 105 V Peak
Guaranteed Off State with Enbl Input
ESD Resistant in Accordance with the 2000 V Human Body Model
Extremely Low Saturation Voltage
Pb−Free Packages are Available
1
High Voltage Transient Isolation
Power Switching to Electronic Modules
DC Power Distribution in Line Operated Equipment
Buffering Sensitive Circuits from Poorly Regulated Power Supplies
Pre−conditioning of Voltage Regulator Input Voltage
1
BAG = Device Code
A
= Assembly Location
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
Applications Include:
•
•
•
•
•
BAGAYW G
G
TSOP−6
CASE 318G
INTERNAL CIRCUIT DIAGRAM/
PIN CONFIGURATION
Vout
Vin
Q2
(5)
R2
(6)
R4
Q1
Vin
Vout
Rboost
N.C.
Rboost
(3)
(2)
NCP3712ASNT1
R1
+
VZ
Ropt
L
O
A
D
Enbl
or
1 k (min)
P. S.
R3
−
(4)
VZ
(1)
Enbl
ORDERING INFORMATION
Package
Shipping†
NCP3712ASNT1
TSOP−6
3000/Tape & Reel
NCP3712ASNT1G
TSOP−6
(Pb−Free)
3000/Tape & Reel
NCP3712ASNT3
TSOP−6 10,000/Tape & Reel
Device
SW
Figure 1. Typical Application Circuit
NCP3712ASNT3G
TSOP−6 10,000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2006
April, 2006 − Rev. 4
1
Publication Order Number:
NCP3712ASNT1/D
NCP3712ASNT1
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) (Note 1)
Rating
Symbol
Value
Unit
Vio
105
V
Reverse Input−to−Vz. Voltage
Vin(rev)
−9.0
V
Reverse Input−to−Rboost Voltage
Vin(rev)
−5.0
V
Output Load Current − Continuous
Iload
−300
mA
Enbl Input Current − Continuous
Ienbl
5.0
mA
Input−to−Output Voltage
Vz Input Current − Continuous
Iz
3.0
mA
Iboost
10
mA
Junction Temperature
TJ
125
°C
Operating Ambient Temperature Range
TA
−40 to +85
°C
Storage Temperature Range
Tstg
−65 to +150
°C
Device Power Dissipation (Minimum Footprint)
PD
300
mW
−
2.4
mW/°C
ILatchup
200
200
mA
Rboost Input Current − Continuous
Derate Above 25°C
Latchup Performance:
Positive
Negative
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. This device contains ESD protection and exceeds the following tests:
Human Body Model 1500 V per MIL−STD−883, Method 3015.
Machine Model Method 150 V.
KEY
A+
FB*
1N4004
0.01 mF
TYP
Vout
Enbl
0.027 mF
TYP
1
N.C.
Ienbl
18 V
TYP R
opt
2
Rboost
Iboost
FB*
NCP3712
ASNT1
6
Vin
Iload
Renbl
5
VZ
4
3
0−500 W
Rload
1.0 k TYP
IZ
A−
*FB = MMZ2012 Y601B
Figure 2. Typical Applications Circuit for Load Dump Transient Protection
120
13.5 V SUPPLY RAIL
“ENABLE
NOT”
INPUT
10
50%
AMPLITUDE
tpLH
TYPICAL
INPUT
TRANSIENT
100
DEVICE OUTPUT
VOLTAGE
AMPLITUDE (V)
AMPLITUDE (V)
15
LOAD
DEPENDENT
EXP DECAY
5
80
60
13.5 V
SUPPLY
RAIL
40
Voff
20
0
LOAD
DEPENDENT
OUTPUT
EXP DECAY
Von
0
0
5
10
15
30
20 25
TIME (ms)
35
40
45
50
0
Figure 3. Enable NOT Switching Waveforms
50
100
150
200
TIME (ms)
250
300
Figure 4. Load Dump Waveforms
http://onsemi.com
2
350
NCP3712ASNT1
ELECTRICAL CHARACTERISTICS (Vin = 12.5 VDC Ref to Gnd, TA = 25°C unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
105
−
−
−
−0.7
−
−
−
−100
13
−
−
150
−
−
15.5
−
18.7
−
0.2
0.5
−
−
−
−
−
−
−200
−200
−300
8.5
−
10.5
−
−
−1.0
tPHL
tPLH
−
−
1.5
1.5
−
−
tf
tr
−
−
75
400
−
−
Input Leakage Resistor
R2
7.0
10
13
kW
Input Resistor
R1
3.3
4.7
6.1
kW
Output Leakage Resistor
R4
1.4
2.4
3.2
kW
Enable Input Resistor
R3
1.4
2.4
3.2
kW
OFF CHARACTERISTICS
V(BRio)
Input−Output Breakdown Voltage
(@ Iout = 200 mA)
Output Reverse Breakdown Voltage
(@ Iout = −1.0 mA Pulse)
Vdc
V(−BRout)
Output Leakage Current
(Vin = Venbl = 30 V, TA = 25°C)
Iload(off)
Guaranteed “Off” State “ENBL NOT” Voltage
(IO ≤ 100 mA)
Venbl(off)
Required “Off” State Iz Current
(Rload = 100 W)
Iz(off)
Vin(off)
(Vz = 16 V, Iload = 100 mA, Renbl = 1500 W)
Voff
Vdc
mAdc
Vdc
mAdc
Vdc
ON CHARACTERISTICS
Input−Output On Voltage
(Io = 100 mA, Ienbl = −3.0 mA)
Vio(on)
Output Load Current ⎯ Continuous
(Ienbl = −3.0 mA, Vio(on) = 0.5 Vdc)
(Iboost = −9.0 mA, Vio(on) = 0.5 Vdc)
(Iboost = −9.0 mA, Vio(on) = 0.6 Vdc)
Io(on)
Vin(on)
(Vz = 16 V, Iload = 100 mA, Renbl = 1500 W)
Von
“ENBL NOT” Input Current
(Io = 100 mA, Vio(on) = 0.35 Vdc, Renbl = 1500 W)
Ienbl
Vdc
mAdc
Vdc
mAdc
SWITCHING CHARACTERISTICS
mS
Propagation Delay Time:
Hi to Lo Prop Delay; Fig. 3 (Vin = Venbl = 13.5 V)
Lo to Hi Prop Delay; Fig. 3 (Vin = 13.5 V, Venbl = 0 V)
hS
Transition Times:
Fall Time; Fig. 4 (Vin = Venbl = 13.5 V)
Rise Time; Fig. 4 (Vin = Venbl = 0 V)
INTERNAL RESISTORS
http://onsemi.com
3
NCP3712ASNT1
PACKAGE DIMENSIONS
TSOP−6
CASE 318G−02
ISSUE S
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD
FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
D
6
HE
1
5
4
2
3
E
b
e
q
c
A
0.05 (0.002)
L
A1
DIM
A
A1
b
c
D
E
e
L
HE
q
MIN
0.90
0.01
0.25
0.10
2.90
1.30
0.85
0.20
2.50
0°
MILLIMETERS
NOM
MAX
1.00
1.10
0.06
0.10
0.38
0.50
0.18
0.26
3.00
3.10
1.50
1.70
0.95
1.05
0.40
0.60
2.75
3.00
10°
−
MIN
0.035
0.001
0.010
0.004
0.114
0.051
0.034
0.008
0.099
0°
INCHES
NOM
0.039
0.002
0.014
0.007
0.118
0.059
0.037
0.016
0.108
−
MAX
0.043
0.004
0.020
0.010
0.122
0.067
0.041
0.024
0.118
10°
SOLDERING FOOTPRINT*
2.4
0.094
1.9
0.075
0.95
0.037
0.95
0.037
0.7
0.028
1.0
0.039
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCP3712ASNT1/D
Similar pages