Luguang MBRF1590CT Isolated 15.0amp.schottky barrier rectifier Datasheet

MBRF1535CT-MBRF15150CT
Isolated 15.0AMP.Schottky Barrier Rectifiers
ITO-220AB
Features
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for transient protection
High temperature soldering guaranteed:
260oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: ITO-220AB molded plastic body
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum
Ratings and Electrical Characteristics
o
Rating at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Symbol MBRF MBRF MBRF MBRF MBRF MBRF MBRF Units
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
o
at TC=105 C
Peak Repetitive Forward Current (Rated VR, Square Wave,
20KHz) at Tc=105oC
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method )
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at (Note 2)
IF=7.5A, Tc=25oC
IF=7.5A, Tc=125oC
IF=15A, Tc=25oC
IF=15A, Tc=125oC
O
Maximum Instantaneous Reverse Current @ Tc=25 C
at Rated DC Blocking Voltage (Note 2) @ Tc=125 OC
VRRM
VRMS
VDC
I(AV)
1550
CT
50
35
50
1560
CT
60
42
60
1590 15100 15150
CT
CT
CT
90
100
150
63
70
105
90
100
150
V
15.0
A
IFSM
IRRM
150
1.0
A
0.5
VF
-
0.57
0.84
0.72
0.75
0.65
-
-
IR
0.5
10
0.3
7.5
10,000
RθJC
TJ
TSTG
A
0.92
0.82
-
-
0..95
0..92
-
0.1
5.0
3.5
-65 to +150
-65 to +175
1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case with Heatsink size of 2 in x 3 in x 0.25 in Al-Plate.
http://www.luguang.cn
V
IFRM
dV/dt
Storage Temperature Range
V
A
Maximum Thermal Resistance Per Leg (Note 3)
Notes:
1545
CT
45
31
45
15
Voltage Rate of Change (Rated VR)
Operating Junction Temperature Range
1535
CT
35
24
35
mail:[email protected]
V
mA
mA
V/uS
o
C/W
o
C
o
C
MBRF1535CT-MBRF15150CT
Isolated 15.0AMP.Schottky Barrier Rectifiers
RATINGS AND CHARACTERISTIC CURVES (MBRF1535CT THRU MBRF15150CT)
FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE
CURRENT PER LEG
FIG.1- FORWARD CURRENT DERATING CURVE
300
RESISTIVE OR
INDUCTIVE LOAD
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT. (A)
25
20
15
10
5
200
150
100
50
0
0
0
50
100
o
CASE TEMPERATURE. ( C)
150
1
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
Tj=125 0C
10
INSTANTANEOUS REVERSE CURRENT. (mA)
10
Pulse Width=300 s
1% Duty Cycle
1
Tj=25 0C
0.1
MBRF1535CT-MBRF1545CT
MBRF1550CT-MBRF1560CT
Tj=125 0C
1
0.1
Tj=75 0C
MBRF1535CT-MBRF1545CT
MBRF1550CT-MBRF15150CT
0.01
Tj=25 0C
MBRF1590CT-MBRF15150CT
0.01
0
0.001
0.1
0.2
0
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
FORWARD VOLTAGE. (V)
TRANSIENT THERMAL IMPEDANCE. ( OC/W)
JUNCTION CAPACITANCE.(pF)
100
Tj=25 0C
f=1.0MHz
Vsig=50mVp-p
1,000
100
40
MBRF1535CT-MBRF1560CT
MBRF1590CT-MBRF15150CT
10
1.0
10
REVERSE VOLTAGE. (V)
http://www.luguang.cn
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.6- TYPICAL TRANSIENT THERMAL
CHARACTERISTICS PER LEG
FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG
4,000
0.1
100
10
NUMBER OF CYCLES AT 60Hz
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER LEG
50
40
INSTANTANEOUS FORWARD CURRENT. (A)
Tj=Tj max.
8.3ms Single Half Sine Wave
JEDEC Method
250
100
10.0
1
0.1
0.01
0.1
1
10
T, PULSE DURATION. (sec)
mail:[email protected]
Version: A06
100
Similar pages