Kingbright AA1114-2PBCA-CC 11mm x 1.4mm backlight Datasheet

11mm x 1.4mm BACKLIGHT
PRELIMINARY SPEC
Part Number: AA1114/2PBCA/CC
BLUE
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
zLOW
The Blue source color devices are made with InGaN on
POWER CONSUMPTION.
zIDEAL
zMOISTURE
zRoHS
SiC Light Emitting Diode.
FOR BACKLIGHTING.
SENSITIVITY LEVEL : LEVEL 4.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
COMPLIANT.
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAG5692
REV NO: V.1
APPROVED: J. Lu
CHECKED: Allen Liu
DATE: JUN/19/2006
DRAWN: Y.W.WANG
PAGE: 1 OF 4
ERP: 1201002377
Selection Guide
Dice
Part No.
AA1114/2PBCA/CC
Iv (mcd) [2]
@ 20mA
Lens Type
BLUE (InGaN)
Viewing
Angle [1]
Min.
Typ.
2θ1/2
18
50
120°
WATER CLEAR
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity/ Luminous Flux: +/-15%
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
21
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
3.8
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm
2.Forward Voltage: +/-0.1V
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
114
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAG5692
REV NO: V.1
APPROVED: J. Lu
CHECKED: Allen Liu
DATE: JUN/19/2006
DRAWN: Y.W.WANG
PAGE: 2 OF 4
ERP: 1201002377
BLUE
AA1114/2PBCA/CC
SPEC NO: DSAG5692
REV NO: V.1
APPROVED: J. Lu
CHECKED: Allen Liu
DATE: JUN/19/2006
DRAWN: Y.W.WANG
PAGE: 3 OF 4
ERP: 1201002377
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAG5692
REV NO: V.1
APPROVED: J. Lu
CHECKED: Allen Liu
AA1114/2PBCA/CC
DATE: JUN/19/2006
DRAWN: Y.W.WANG
PAGE: 4 OF 4
ERP: 1201002377
Similar pages