TI1 DM5416 Dm5416 dm7416 hex inverting buffers with high voltage open-collector output Datasheet

DM5416,DM7416
DM5416 DM7416 Hex Inverting Buffers with High Voltage Open-Collector
Outputs
Literature Number: SNOS239A
DM5416/DM7416 Hex Inverting Buffers with
High Voltage Open-Collector Outputs
General Description
Pull-Up Resistor Equations
RMAX e
VO (Min) b VOH
N1 (IOH) a N2 (IIH)
VO (Max) b VOL
RMIN e
IOL b N3 (IIL)
Where: N1 (IOH) e total maximum output high current for all
outputs tied to pull-up resistor
N2 (IIH) e total maximum input high current for all
inputs tied to pull-up resistor
N3 (IIL) e total maximum input low current for all
inputs tied to pull-up resistor
e
This device contains six independent gates each of which
performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation.
et
Connection Diagram
bs
ol
Dual-In-Line Package
TL/F/6504 – 1
O
Order Number DM5416J, DM5416W or DM7416N
See NS Package Number J14A, N14A or W14B
Function Table
YeA
Input
Output
A
Y
L
H
H
L
H e High Logic Level
L e Low Logic Level
C1995 National Semiconductor Corporation
TL/F/6504
RRD-B30M105/Printed in U. S. A.
DM5416/DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs
June 1989
Absolute Maximum Ratings (Note)
Note: The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage
7V
Input Voltage
5.5V
Output Voltage
15V
Operating Free Air Temperature Range
b 55§ C to a 125§ C
DM54
DM74
0§ C to a 70§ C
b 65§ C to a 150§ C
Storage Temperature Range
Recommended Operating Conditions
DM5416
Parameter
DM7416
Units
Min
Nom
Max
Min
Nom
Max
4.5
5
5.5
4.75
5
5.25
VCC
Supply Voltage
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
0.8
VOH
High Level Output Voltage
15
IOL
Low Level Output Current
30
TA
Free Air Operating Temperature
2
125
V
0.8
0
V
15
V
40
mA
70
§C
et
b 55
V
2
e
Symbol
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol
Parameter
Conditions
Typ
(Note 1)
Min
Units
VI
Input Clamp Voltage
b 1.5
V
ICEX
High Level Output
Current
VCC e Min, VO e 15V
VIL e Max
250
mA
VOL
Low Level Output
Voltage
VCC e Min, IOL e Max
VIH e Min
0.7
IOL e 16 mA, VCC e Min
0.4
bs
ol
VCC e Min, II e b12 mA
Max
V
Input Current @ Max
Input Voltage
VCC e Max, VI e 5.5V
IIH
High Level Input Current
VCC e Max, VI e 2.4V
40
mA
IIL
Low Level Input Current
VCC e Max, VI e 0.4V
b 1.6
mA
ICCH
Supply Current with
Outputs High
VCC e Max
30
48
mA
ICCL
Supply Current with
Outputs Low
VCC e Max
27
51
mA
O
II
1
mA
Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load)
Symbol
Parameter
Conditions
tPLH
Propagation Delay Time
Low to High Level Output
CL e 15 pF
RL e 110X
tPHL
Propagation Delay Time
High to Low Level Output
Note 1: All typicals are at VCC e 5V, TA e 25§ C.
2
Min
Max
Units
15
ns
23
ns
e
Physical Dimensions inches (millimeters)
O
bs
ol
et
14-Lead Ceramic Dual-In-Line Package (J)
Order Number DM5416J
NS Package Number J14A
14-Lead Molded Dual-In-Line Package (N)
Order Number DM7416N
NS Package Number N14A
3
bs
ol
et
e
14-Lead Ceramic Flat Package (W)
Order Number DM5416W
NS Package Number W14B
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
O
DM5416/DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs
Physical Dimensions inches (millimeters) (Continued)
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and whose
failure to perform, when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
1111 West Bardin Road
Arlington, TX 76017
Tel: 1(800) 272-9959
Fax: 1(800) 737-7018
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
National Semiconductor
Europe
Fax: (a49) 0-180-530 85 86
Email: cnjwge @ tevm2.nsc.com
Deutsch Tel: (a49) 0-180-530 85 85
English Tel: (a49) 0-180-532 78 32
Fran3ais Tel: (a49) 0-180-532 93 58
Italiano Tel: (a49) 0-180-534 16 80
National Semiconductor
Hong Kong Ltd.
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
National Semiconductor
Japan Ltd.
Tel: 81-043-299-2309
Fax: 81-043-299-2408
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Communications and Telecom www.ti.com/communications
Amplifiers
amplifier.ti.com
Computers and Peripherals
www.ti.com/computers
Data Converters
dataconverter.ti.com
Consumer Electronics
www.ti.com/consumer-apps
DLP® Products
www.dlp.com
Energy and Lighting
www.ti.com/energy
DSP
dsp.ti.com
Industrial
www.ti.com/industrial
Clocks and Timers
www.ti.com/clocks
Medical
www.ti.com/medical
Interface
interface.ti.com
Security
www.ti.com/security
Logic
logic.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and Automotive www.ti.com/automotive
Microcontrollers
microcontroller.ti.com
Video and Imaging
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
www.ti.com/video
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
Similar pages