MA-COM MAPDCC0015-TR Low cost five-way gmic smt power divider 1850-1990 mhz Datasheet

MAPDCC0015
Low Cost Five-Way GMIC SMT Power Divider
1850-1990 MHz
Rev. V2
Features
•
•
•
•
•
•
•
•
•
•
•
Small Size, Low Profile
Superior Repeatability (Lot-to-Lot Variation)
Typical Isolation: 28 dB
Typical Insertion Loss: 0.7 dB
Low Cost
1 Watt Power Handling
Lead-Free SOIC-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of DS55-0003
Functional Block Diagram
Description
M/A-COM’s MAPDCC0015 is an IC-based
monolithic power divider using M/A-COM’s GMIC
technology in a low cost SOIC-16 plastic package.
This 5-way power divider is ideally suited for
applications where PCB real estate is at a premium
and part count reduction and cost are critical.
Typical applications include base station switching
networks and other cellular equipment, including
subscriber units. Available in tape and reel.
The MAPDCC0015 is fabricated using a passiveintegrated circuit process. The process features
full-chip passivation for increased performance and
reliability.
Pin Configuration
Pin No.
Function
Pin No.
Function
1
GND
9
GND
2
GND
10
GND
3
GND
11
RF5
Ordering Information
Part Number
Package
4
RF2
12
GND
MAPDCC0015
Bulk Packaging
5
GND
13
RF4
MAPDCC0015-TR
1000 piece reel
6
RF1
14
GND
MAPDCC0015-TB
Sample Test Board
7
GND
15
RF3
8
RF IN
16
GND
Note: Reference Application Note M513 for reel size
information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAPDCC0015
Low Cost Five-Way GMIC SMT Power Divider
1850-1990 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 50Ω
Parameter
Insertion Loss
Above 7.0dB
Isolation
Units
Min
Typ
Max
dB
—
0.7
1.2
dB
21
28
—
VSWR
Input
—
—
1.5:1
1.6:1
VSWR
Output
—
—
1.2:1
1.5:1
dB
—
0.2
0.5
°
—
6
12
Amplitude Balance
Phase Balance
Absolute Maximum Ratings 1,2
Parameter
Input Power4
Absolute Maximum
1 W CW
Handling Procedures
Please observe the following precautions to avoid
damage:
Operating Temperature
-40°C to +85°C
Static Sensitivity
Storage Temperature
-65°C to +150°C
GMIC Circuits are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these devices.
1.
2.
3.
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
With Internal load dissipation of 0.125 W maximum.
Typical Performance Curves
Insertion Loss vs. Frequency
(Dashed lines show amplitude balance window)
VSWR vs. Frequency
Isolation vs. Frequency
Phase Balance vs. Frequency
(Relative RF1)
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAPDCC0015
Low Cost Five-Way GMIC SMT Power Divider
1850-1990 MHz
Rev. V2
Lead-Free, SOIC-16†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages