EPCOS B25620B0557K881 Film capacitors- power electronic capacitor Datasheet

Film capacitors – Power electronic capacitors
MKP PEC DC
Series/Type:
Ordering code:
B2562*
Date:
Version:
June 2010
3.2
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
Film capacitors – Power electronic capacitors
Identification/Classification 2
(header 2 + bottom left header bar):
MKP PEC DC
Ordering code: (top right header bar)
Series/Type: (bottom right header bar)
B2562*
Preliminary data (optional):
(if necessary)
Preliminary data
Department:
FK PEC
Date:
June 2010
Version:
3.2
EPCOS AG 2010. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Metallized polypropylene film capacitors - aluminum case for general purpose applications
B2562*
Female terminals (M6, M8 or M10)
B2562*
Male terminals (M6, M8 or M10)
M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types.
Others available distance between terminals: 35 and 50 mm.
Observation: distance between terminals of 50 mm is available only for capacitors with diameter
116 mm.
FK PEC
June 2010
.
Page 2 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
General Technical Information
The following definitions apply to power capacitors according to IEC 61071.
Rated capacitance CR
Nominal value of the capacitance at 20 °C and measuring frequency range of 50 to 120 Hz.
Rated DC voltage VR
Maximum operating peak voltage of either polarity but of a non-reversing type wave form, for which
the capacitor has been designed, for continuous operation.
Ripple voltage Vr
Peak-to-peak alternating component of the unidirectional voltage.
Maximum surge voltage Vs
Peak voltage induced by a switching or any other disturbance of the system which is allowed for a
limited number of times and duration.
- Maximum duration: 50 ms / pulse
- Maximum number of occurrences: 1000 (during load)
Insulation voltage Vi
Rms rated value of the insulation voltage of capacitive elements and terminals to case or earth. When
it is not specified in the product data sheet, the insulation voltage is at least:
Vi =
VR
2
Maximum rate of voltage rise (dV/dt)max
Maximum permissible repetitive rate of voltage rise of the operational voltage.
Maximum current Imax
Maximum rms current for continuous operation.
Maximum peak current Î
Maximum permissible repetitive current amplitude during continuous operation.
Maximum peak current (Î) and maximum rate of voltage rise (dV/dt)max on a capacitor are related as
follows:
Î = C (dV/dt)max
Maximum surge current Î s
Admissible peak current induced by a switching or any other disturbance of the system which is
allowed for a limited number of times (1000 times) and duration (50 ms / pulse).
Îs = C (dV/dt)s
Ambient temperature ΘA
Temperature of the surrounding air, measured at 10 cm distance and 2/3 of the case height of the
capacitor.
FK PEC
June 2010
.
Page 3 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Lowest operating temperature Θmin
Lowest permitted ambient temperature at which a capacitor may be energized.
Maximum operating temperature Θmax
Highest permitted capacitor temperature during operation, i.e. temperature at the hottest point of the
case.
Hot-spot temperature Θhs
Temperature zone inside of the capacitor at hottest spot.
Tangent of the loss angle of a capacitor tan δ
Ratio between the equivalent series resistance and the capacitive reactance of a capacitor at a
specified sinusoidal alternating voltage, frequency and temperature.
Series resistance Rs
The sum of all Ohmic resistances occurring inside the capacitor.
Thermal resistance Rth
The thermal resistance indicates by how many degrees the capacitor temperature at the hot spot
rises in relation to the dissipation losses.
Maximum power loss Pmax
Maximum permissible power dissipation for the capacitor’s operation.
Pmax =
Θhs − Θ A
R th
Self inductance Lself
The sum of all inductive elements which are contained in a capacitor.
Resonance frequency fr
The lowest frequency at which the impedance of the capacitor becomes minimum.
fr =
1
2π ⋅ L self ⋅ CR
Specifications and characteristics
Application:
The MKP DC series is designed for DC-link applications. Some typical examples of DC-Link
applications are as follows: converters, frequency drives, power conversion, uninterruptible power
supplies, transportation, wind power, solar power, power distribution, etc.
FK PEC
June 2010
.
Page 4 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Test data
Voltage between terminals VTT:
Voltage between terminals and case VTC:
Dissipation factor tan δ at 100 Hz:
Life test:
Life expectancy tLD:
1.5 • VRDC, 10 s
2 • Vi + 1000 V, 10 s
1.0 • 10-3
IEC 61071
100 000 hours
Climatic category
Θstg:
Θmin:
Θmax:
Θhs:
Max. permissible humidity:
55/60/56
–55 °C ... +85 °C
–55 °C
+60 °C
+75 °C
95% (ttest = 56 days)
Construction and general data
Resin filling:
Non PCB, hard polyurethane (Dry type).
Mounting and grounding:
M12 Stud on bottom of the aluminum case.
Cooling:
Naturally air-cooled (or forced air cooling)
Max. Permissible altitude:
2000 m above sea level
Degree of protection:
Indoor mounting
Reference standards:
IEC 61071
RoHS Compliance
Mechanical characteristics
Max. torque (case) M12 stud:
Max. torque (terminal):
12 Nm
8 Nm
FK PEC
June 2010
.
Page 5 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Structure of Part number
Special versions not necessarily are following the part number structure.
FK PEC
June 2010
.
Page 6 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Technical data and ordering codes
Capacitance tolerance
tan o
tan (100 Hz)
Θstg
tLD
VR
V DC
880
1100
CR
±10%
-4
2 • 10
-3
1 • 10
–55 ... +85 °C
100 000 h
Ordering code
F
Imax
Rs
A
m
Lself
Θmax
D
H
nH
°C
mm
mm
160
B25620B0167K881
40
2.2
80
50
75
70
220
B25620B0227K881
50
1.9
60
50
85
70
260
B25620B0267K881
45
2.8
80
50
75
95
260
B25620S0267K881
45
2.8
80
50
85
95
350
B25620B0357K881
50
2.4
60
50
85
95
400
B25620B0407K881
45
3.8
80
50
75
132
440
B25620B0447K882
65
1.5
60
50
116
70
480
B25620B0487K881
55
2.8
60
50
85
120
550
B25620B0557K881
50
3.0
60
50
85
132
700
B25620B0707K882
70
1.7
60
50
116
95
750
B25620B0757K881
55
3.7
60
50
85
173
970
B25620B0977K882
75
1.9
60
50
116
120
1100
B25620B0118K882
75
2.0
60
50
116
132
1500
B25620B0158K882
80
2.4
60
50
116
173
100
140
170
230
260
280
310
350
400
420
450
480
610
700
940
1100
1100
B25620B1107K101
B25620B1147K101
B25620B1177K101
B25620B1237K101
B25620B1267K101
B25620B1287K102
B25620B1317K101
B25620B1357K101
B25620B1407K101
B25620S1427A101
B25620B1457K102
B25620B1487K101
B25620B1617K102
B25620B1707K102
B25620B1947K102
B25620B1118K103
B25620S1118K103
35
45
40
40
40
60
50
40
55
55
65
50
70
70
70
80
80
2.5
2.1
3.2
4.1
4.4
1.6
3.2
5.6
2.4
2.2
1.9
4.3
2.2
2.3
1.6
1.5
1.5
80
60
80
80
80
60
60
80
60
60
60
60
60
60
60
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
85
75
75
75
116
85
75
85
85
116
85
116
116
116
116
116
70
70
95
120
132
70
120
173
132
138
95
173
120
132
173
223
230
FK PEC
June 2010
.
Page 7 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
VR
V DC
1320
1980
CR
Ordering code
F
Imax
Rs
A
m
Lself
Θmax
D
H
nH
°C
mm
mm
70
70
B25620B1706K321
35
2.8
80
50
75
110
B25620B1117K321
35
3.8
80
50
75
95
160
B25620B1167K321
40
4.6
80
50
75
120
180
B25620B1187K321
40
5.1
80
50
75
132
220
B25620B1227K321
45
3.6
60
50
85
120
260
B25620B1267K321
45
3.9
60
50
85
132
310
B25620B1317K322
65
2.0
60
50
116
95
340
B25620B1347K321
50
4.9
60
50
85
173
420
B25620B1427K322
65
2.4
60
50
116
120
480
B25620B1487K322
70
2.6
60
50
116
132
660
B25620B1667K322
70
3.1
60
50
116
173
30
B25620B1306K981
25
3.8
80
50
75
70
40
B25620B1406K981
30
3.1
60
50
85
70
50
B25620B1506K981
30
5.1
80
50
75
95
70
B25620B1706K981
35
3.9
60
50
85
95
80
B25620B1806K981
30
7.1
80
50
75
132
110
B25620B1117K981
30
9.1
80
50
75
173
145
B25620B1147K981
40
7.1
60
50
85
173
190
B25620B1197K982
60
3.0
60
50
116
120
215
B25620B1217K982
60
3.3
60
50
116
132
295
B25620B1297K982
60
4.0
60
50
116
173
Other capacitances or voltage values are available upon request.
FK PEC
June 2010
.
Page 8 of 10
Film capacitors – Power electronic capacitors
MKP PEC DC
B2562*
Preliminary data
Cautions and warnings
In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at
all.
Check tightness of the connections/terminals periodically.
The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit
the capacitor before handling.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
EPCOS AG is not responsible for any kind of possible damages to persons or things due to improper
installation and application of capacitors for power electronics.
Safety
Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage
may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical
disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy
contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized.
Follow good engineering practice.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not exceeded at
extreme service conditions.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are
avoided.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali,
salt or the like are present. In dusty environments regular maintenance and cleaning especially of the terminals
is required to avoid conductive path between phases and/or phases and ground.
The maximum storage temperature is 85 °C.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors, too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
FK PEC
June 2010
.
Page 9 of 10
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic,
DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube,
PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer,
SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe
and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 10 of 10
Similar pages