ON MBT3904DW1T1 Dual general purpose transistor Datasheet

MBT3904DW1T1,
MBT3904DW2T1
Dual General Purpose
Transistors
The MBT3904DW1T1 and MBT3904DW2T1 devices are a
spin-of f of our popular SOT-23/SOT-323 three-leaded device. It is
designed for general purpose amplifier applications and is housed in
the SOT-363 six-leaded surface mount package. By putting two
discrete devices in one package, this device is ideal for low-power
surface mount applications where board space is at a premium.
Features
http://onsemi.com
MARKING
DIAGRAM
6
SOT-363/SC-88/
SC70-6
CASE 419B
6
•hFE, 100-300
•Low VCE(sat), ≤ 0.4 V
•Simplifies Circuit Design
•Reduces Board Space
•Reduces Component Count
•Available in 8 mm, 7-inch/3,000 Unit Tape and Reel
•Pb-Free Packages are Available
XX MG
G
1
1
XX = MA for MBT3904DW1T1
MJ for MBT3904DW2T1
M = Date Code
G = Pb-Free Package
(Note: Microdot may be in either location)
(3)
(2)
(1)
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector-Emitter Voltage
VCEO
40
Vdc
Collector-Base Voltage
VCBO
60
Vdc
Emitter-Base Voltage
VEBO
6.0
Vdc
200
mAdc
Collector Current - Continuous
Electrostatic Discharge
IC
ESD
Q1
(4)
(5)
(6)
MBT3904DW1T1
STYLE 1
HBM Class 2
MM Class B
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
Q2
(3)
(2)
(1)
Q2
Q1
THERAML CHARACTERISTICS
Characteristic
(4)
(5)
(6)
Symbol
Max
Unit
PD
150
mW
MBT3904DW2T1
STYLE 27
Thermal Resistance,
Junction-to-Ambient
RqJA
833
°C/W
ORDERING INFORMATION
Junction and Storage
Temperature Range
TJ, Tstg
-55 to +150
°C
Total Package Dissipation (Note 1)
TA = 25°C
1. Device mounted on FR4 glass epoxy printed circuit board using the minimum
recommended footprint.
Device
Package
Shipping†
MBT3904DW1T1
SOT-363
3000 Units/Reel
MBT3904DW1T1G SOT-363
(Pb-Free)
3000 Units/Reel
SOT-363
3000 Units/Reel
MBT3904DW2T1G SOT-363
(Pb-Free)
MBT3904DW2T1
3000 Units/Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
May, 2005 - Rev. 5
1
Publication Order Number:
MBT3904DW1T1/D
MBT3904DW1T1, MBT3904DW2T1
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
40
-
60
-
6.0
-
-
50
-
50
40
70
100
60
30
300
-
-
0.2
0.3
0.65
-
0.85
0.95
300
-
-
4.0
-
8.0
1.0
2.0
10
12
Unit
OFF CHARACTERISTICS
Collector-Emitter Breakdown Voltage (Note 2)
(IC = 1.0 mAdc, IB = 0)
V(BR)CEO
Collector-Base Breakdown Voltage
(IC = 10 mAdc, IE = 0)
V(BR)CBO
Emitter-Base Breakdown Voltage
(IE = 10 mAdc, IC = 0)
V(BR)EBO
Base Cutoff Current
(VCE = 30 Vdc, VEB = 3.0 Vdc)
IBL
Collector Cutoff Current
(VCE = 30 Vdc, VEB = 3.0 Vdc)
ICEX
Vdc
Vdc
Vdc
nAdc
nAdc
ON CHARACTERISTICS (Note 2)
DC Current Gain
(IC = 0.1 mAdc, VCE = 1.0 Vdc)
(IC = 1.0 mAdc, VCE = 1.0 Vdc)
(IC = 10 mAdc, VCE = 1.0 Vdc)
(IC = 50 mAdc, VCE = 1.0 Vdc)
(IC = 100 mAdc, VCE = 1.0 Vdc)
hFE
Collector-Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
(IC = 50 mAdc, IB = 5.0 mAdc)
VCE(sat)
Base-Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
(IC = 50 mAdc, IB = 5.0 mAdc)
VBE(sat)
-
Vdc
Vdc
SMALL-SIGNAL CHARACTERISTICS
Current-Gain - Bandwidth Product
(IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz)
fT
Output Capacitance
(VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz)
Cobo
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz)
Cibo
Input Impedance
(VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz)
hie
Voltage Feedback Ratio
(VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz)
hre
Small-Signal Current Gain
(VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz)
hfe
Output Admittance
(VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz)
hoe
Noise Figure
(VCE = 5.0 Vdc, IC = 100 mAdc, RS = 1.0 k W, f = 1.0 kHz)
NF
2. Pulse Test: Pulse Width ≤ 300 ms; Duty Cycle ≤2.0%.
http://onsemi.com
2
MHz
pF
pF
kW
X 10- 4
0.5
0.1
8.0
10
100
100
400
400
1.0
3.0
40
60
-
5.0
4.0
-
mmhos
dB
MBT3904DW1T1, MBT3904DW2T1
SWITCHING CHARACTERISTICS
Symbol
Min
Max
Delay Time
(VCC = 3.0 Vdc, VBE = -0.5 Vdc)
Characteristic
td
-
35
Rise Time
(IC = 10 mAdc, IB1 = 1.0 mAdc)
tr
-
35
Storage Time
(VCC = 3.0 Vdc, IC = 10 mAdc)
ts
-
200
Fall Time
(IB1 = IB2 = 1.0 mAdc)
tf
-
50
DUTY CYCLE = 2%
300 ns
+3 V
+10.9 V
275
10 < t1 < 500 ms
DUTY CYCLE = 2%
t1
Unit
ns
ns
+3 V
+10.9 V
275
10 k
10 k
0
-0.5 V
Cs < 4 pF*
< 1 ns
1N916
-9.1 V′
< 1 ns
* Total shunt capacitance of test jig and connectors
Figure 1. Delay and Rise Time
Equivalent Test Circuit
Figure 2. Storage and Fall Time
Equivalent Test Circuit
http://onsemi.com
3
Cs < 4 pF*
MBT3904DW1T1, MBT3904DW2T1
TYPICAL TRANSIENT CHARACTERISTICS
TJ = 25°C
TJ = 125°C
10
5000
2000
5.0
Q, CHARGE (pC)
CAPACITANCE (pF)
VCC = 40 V
IC/IB = 10
3000
7.0
Cibo
3.0
Cobo
2.0
1000
700
500
QT
300
200
QA
100
70
50
1.0
0.1
0.2 0.3
0.5 0.7 1.0
2.0 3.0
5.0 7.0 10
20 30 40
2.0 3.0
5.0 7.0 10
20
30
50 70 100
IC, COLLECTOR CURRENT (mA)
Figure 3. Capacitance
Figure 4. Charge Data
500
200
500
IC/IB = 10
100
70
tr @ VCC = 3.0 V
50
30
20
VCC = 40 V
IC/IB = 10
300
200
t r, RISE TIME (ns)
300
200
TIME (ns)
1.0
REVERSE BIAS VOLTAGE (VOLTS)
40 V
100
70
50
30
20
15 V
10
7
5
10
2.0 V
td @ VOB = 0 V
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
IC, COLLECTOR CURRENT (mA)
Figure 5. Turn-On Time
Figure 6. Rise Time
IC/IB = 10
200
500
t′s = ts - 1/8 tf
IB1 = IB2
VCC = 40 V
IB1 = IB2
300
200
IC/IB = 20
t f , FALL TIME (ns)
t s′ , STORAGE TIME (ns)
IC/IB = 20
200
IC, COLLECTOR CURRENT (mA)
500
300
200
7
5
100
70
IC/IB = 20
50
IC/IB = 10
30
20
100
70
50
10
10
7
5
7
5
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
200
IC/IB = 10
30
20
1.0
2.0 3.0
5.0 7.0 10
20
30
50 70 100
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 7. Storage Time
Figure 8. Fall Time
http://onsemi.com
4
200
MBT3904DW1T1, MBT3904DW2T1
TYPICAL AUDIO SMALL-SIGNAL CHARACTERISTICS
NOISE FIGURE VARIATIONS
(VCE = 5.0 Vdc, TA = 25°C, Bandwidth = 1.0 Hz)
14
12
SOURCE RESISTANCE = 200 W
IC = 1.0 mA
f = 1.0 kHz
SOURCE RESISTANCE = 200 W
IC = 0.5 mA
8
6
SOURCE RESISTANCE = 1.0 k
IC = 50 mA
4
SOURCE RESISTANCE = 500 W
IC = 100 mA
2
0
0.1
0.2
0.4
1.0
2.0
IC = 1.0 mA
12
NF, NOISE FIGURE (dB)
NF, NOISE FIGURE (dB)
10
IC = 0.5 mA
10
IC = 50 mA
8
IC = 100 mA
6
4
2
4.0
10
20
40
0
100
0.1
0.2
0.4
1.0
2.0
4.0
10
20
f, FREQUENCY (kHz)
RS, SOURCE RESISTANCE (k OHMS)
Figure 9. Noise Figure
Figure 10. Noise Figure
40
100
5.0
10
5.0
10
h PARAMETERS
(VCE = 10 Vdc, f = 1.0 kHz, TA = 25°C)
100
hoe, OUTPUT ADMITTANCE ( m mhos)
h fe , CURRENT GAIN
300
200
100
70
50
30
0.1
0.2
0.3
0.5
1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5.0
50
20
10
5
2
1
10
0.1
0.2
Figure 11. Current Gain
Figure 12. Output Admittance
hre , VOLTAGE FEEDBACK RATIO (x 10 -4)
h ie , INPUT IMPEDANCE (k OHMS)
20
10
5.0
2.0
1.0
0.5
0.2
0.1
0.2
0.3
0.5
1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
0.3
0.5
1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
5.0
10
10
7.0
5.0
3.0
2.0
1.0
0.7
0.5
0.1
Figure 13. Input Impedance
0.2
0.3
0.5
1.0
2.0 3.0
IC, COLLECTOR CURRENT (mA)
Figure 14. Voltage Feedback Ratio
http://onsemi.com
5
MBT3904DW1T1, MBT3904DW2T1
h FE, DC CURRENT GAIN (NORMALIZED)
TYPICAL STATIC CHARACTERISTICS
2.0
TJ = +125°C
VCE = 1.0 V
+25°C
1.0
0.7
-55 °C
0.5
0.3
0.2
0.1
0.1
0.2
0.3
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
20
30
70
50
100
200
IC, COLLECTOR CURRENT (mA)
VCE, COLLECTOR EMITTER VOLTAGE (VOLTS)
Figure 15. DC Current Gain
1.0
TJ = 25°C
0.8
IC = 1.0 mA
10 mA
30 mA
100 mA
0.6
0.4
0.2
0
0.01
0.02
0.03
0.05
0.07
0.1
0.2
0.3
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
IB, BASE CURRENT (mA)
Figure 16. Collector Saturation Region
1.0
1.2
TJ = 25°C
VBE(sat) @ IC/IB =10
0.8
VBE @ VCE =1.0 V
0.6
0.4
VCE(sat) @ IC/IB =10
qVC FOR VCE(sat)
0
-55 °C TO +25°C
-0.5
-55 °C TO +25°C
-1.0
+25°C TO +125°C
0.2
0
+25°C TO +125°C
0.5
COEFFICIENT (mV/ °C)
V, VOLTAGE (VOLTS)
1.0
qVB FOR VBE(sat)
-1.5
1.0
2.0
5.0
10
20
50
100
-2.0
200
0
20
40
60
80
100
120
140
160
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 17. “ON” Voltages
Figure 18. Temperature Coefficients
http://onsemi.com
6
180 200
MBT3904DW1T1, MBT3904DW2T1
PACKAGE DIMENSIONS
SOT-363/SC-88/SC70-6
CASE 419B-02
ISSUE W
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419B-01 OBSOLETE, NEW STANDARD 419B-02.
e
6
5
4
HE
DIM
A
A1
A3
b
C
D
E
e
L
HE
-E1
2
3
b 6 PL
0.2 (0.008)
M
E
M
MILLIMETERS
MIN
NOM MAX
0.80
0.95
1.10
0.00
0.05
0.10
0.20 REF
0.10
0.21
0.30
0.10
0.14
0.25
1.80
2.00
2.20
1.15
1.25
1.35
0.65 BSC
0.10
0.20
0.30
2.00
2.10
2.20
INCHES
NOM MAX
0.037 0.043
0.002 0.004
0.008 REF
0.004 0.008 0.012
0.004 0.005 0.010
0.070 0.078 0.086
0.045 0.049 0.053
0.026 BSC
0.004 0.008 0.012
0.078 0.082 0.086
MIN
0.031
0.000
A3
STYLE 1:
PIN 1. EMITTER 2
2. BASE 2
3. COLLECTOR 1
4. EMITTER 1
5. BASE 1
6. COLLECTOR 2
C
A
A1
STYLE 27:
PIN 1. BASE 2
2. BASE 1
3. COLLECTOR 1
4. EMITTER 1
5. EMITTER 2
6. COLLECTOR 2
L
SOLDERING FOOTPRINT*
0.50
0.0197
0.65
0.025
0.65
0.025
0.40
0.0157
1.9
0.0748
SCALE 20:1
mm Ǔ
ǒinches
*For additional information on our Pb-Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBT3904DW1T1/D
Similar pages