TI1 LP2985AIM5-2.8/NOPB Micropower 150 ma low-noise ultra low-dropout regulator in sot-23 and dsbga packages designed for use with very low esr output capacitor Datasheet

LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
LP2985-N Micropower 150 mA Low-Noise Ultra Low-Dropout Regulator in SOT-23 and
DSBGA Packages
Designed for Use with Very Low ESR Output Capacitors
Check for Samples: LP2985-N
FEATURES
DESCRIPTION
•
•
•
The LP2985-N is a 150 mA, fixed-output voltage
regulator designed to provide ultra low-dropout and
low noise in battery powered applications.
1
2
•
•
•
•
•
•
•
•
•
•
•
Ultra Low Dropout Voltage
Ensured 150 mA Output Current
Smallest Possible Size (SOT-23, DSBGA
Packages)
Requires Minimum External Components
Stable with Low-ESR Output Capacitor
<1 µA Quiescent Current when Shut Down
Low Ground Pin Current at All Loads
Output Voltage Accuracy 1% (A Grade)
High Peak Current Capability
Wide Supply Voltage Range (16V Max)
Low ZOUT: 0.3Ω Typical (10 Hz to 1 MHz)
Overtemperature/Overcurrent Protection
−40°C to +125°C Junction Temperature Range
Custom Voltages Available
APPLICATIONS
•
•
•
•
Cellular Phone
Palmtop/Laptop Computer
Personal Digital Assistant (PDA)
Camcorder, Personal Stereo, Camera
Using an optimized VIP (Vertically Integrated PNP)
process, the LP2985-N delivers unequalled
performance in all specifications critical to batterypowered designs:
Dropout Voltage: Typically 300 mV @ 150 mA load,
and 7 mV @ 1 mA load.
Ground Pin Current: Typically 850 µA @ 150 mA
load, and 75 µA @ 1 mA load.
Enhanced Stability: The LP2985-N is stable with
output capacitor ESR as low as 5 mΩ, which allows
the use of ceramic capacitors on the output.
Sleep Mode: Less than 1 µA quiescent current when
ON/OFF pin is pulled low.
Smallest Possible Size: SOT-23 and DSBGA
packages use absolute minimum board space.
Precision Output: 1% tolerance output voltages
available (A grade).
Low Noise: By adding a 10 nF bypass capacitor,
output noise can be reduced to 30 µV (typical).
Multiple voltage options, from 2.5V to 5.0V, are
available as standard products. Consult factory for
custom voltages.
BLOCK DIAGRAM
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
BASIC APPLICATION CIRCUIT
*ON/OFF input must be actively terminated. Tie to VIN if this function is not to be used.
**Minimum capacitance is shown to ensure stability (may be increased without limit). Ceramic capacitor required for
output (see APPLICATION HINTS).
***Reduces output noise (may be omitted if application is not noise critical). Use ceramic or film type with very low
leakage current (see APPLICATION HINTS).
CONNECTION DIAGRAMS
Top View
Top View
Figure 1. SOT-23, 5-Lead Small Outline Package
(M5)
See Package Number DBV0005A
Figure 2. DSBGA Package, 5-Bump Package
See Package Numbers YPB0005 and YZR0005
NOTE
The actual physical placement of the package marking will vary from part to part. Package
marking contains date code and lot traceability information, and will vary considerably.
Package marking does not correlate to device type.
PIN DESCRIPTIONS
Name
2
Pin Number
SOT-23
DSBGA
Function
VIN
1
C3
Input Voltage
GND
2
A1
Common Ground (device substrate)
ON/OFF
3
A3
Logic high enable input
BYPASS
4
B2
Bypass capacitor for low noise operation
VOUT
5
C1
Regulated output voltage
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ABSOLUTE MAXIMUM RATINGS (1) (2)
Storage Temperature Range
−65°C to +150°C
Operating Junction Temperature Range
−40°C to +125°C
Lead Temp. (Soldering, 5 sec.)
ESD Rating
260°C
(3)
2 kV
Power Dissipation (4)
Internally Limited
−0.3V to +16V
Input Supply Voltage (Survival)
Input Supply Voltage (Operating)
2.5V to +16V
−0.3V to +16V
Shutdown Input Voltage (Survival)
Output Voltage (Survival, See (5))
−0.3V to +9V
IOUT (Survival)
Short Circuit Protected
Input-Output Voltage (Survival, See (6))
(1)
(2)
(3)
(4)
−0.3V to +16V
Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply
when operating the device outside of its rated operating conditions.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
The ESD rating of pins 3 and 4 for the SOT-23 package, or pins 5 and 2 for the DSBGA package, is 1 kV.
The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-to-ambient thermal
resistance, θJ-A, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated
using:
where
(a) the value of θJ-A for the SOT-23 package is 220°C/W in a typical PC board mounting and the DSBGA package
is 225°C/W.
(5)
(6)
Exceeding the maximum allowable dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown.
For 12V option, output voltage survival: -0.3 to +16V. If used in a dual-supply system where the regulator load is returned to a negative
supply, the LP2985-N output must be diode-clamped to ground.
The output PNP structure contains a diode between the VIN to VOUT terminals that is normally reverse-biased. Reversing the polarity
from VIN to VOUT will turn on this diode.
ELECTRICAL CHARACTERISTICS (1)
Limits in standard typeface are for TJ = 25°C. and limits in boldface type apply over the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, CIN = 1 µF, COUT = 4.7 µF, VON/OFF = 2V.
Symbol
ΔVO
Parameter
Output Voltage
Tolerance
Conditions
Typ
Max
Min
Max
IL = 1 mA
−1.0
1.0
−1.5
1.5
1 mA ≤ IL ≤ 50 mA
−1.5
1.5
−2.5
2.5
−2.5
2.5
−3.5
3.5
−2.5
2.5
−3.0
3.0
−3.5
3.5
−4.0
4.0
VO(NOM)+1V ≤ VIN ≤ 16V
0.007
Line Regulation
(1)
(2)
LP2985I-X.X (2)
Min
1 mA ≤ IL ≤ 150 mA
Output Voltage
LP2985AI-X.X (2)
0.014
0.014
0.032
0.032
Units
%VNOM
%/V
Exposing the DSBGA device to direct sunlight will cause misoperation. See APPLICATION HINTS for additional information.
Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical
Quality Control (SQC) methods. The limits are used to calculate TI's Average Outgoing Quality Level (AOQL).
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
3
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
ELECTRICAL CHARACTERISTICS(1) (continued)
Limits in standard typeface are for TJ = 25°C. and limits in boldface type apply over the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, CIN = 1 µF, COUT = 4.7 µF, VON/OFF = 2V.
Symbol
VIN–VO
Parameter
Dropout Voltage (3)
Conditions
IL = 0
IL = 50 mA
120
IL = 150 mA
280
IL = 0
65
75
IL = 10 mA
ION/OFF
120
IL = 50 mA
350
IL = 150 mA
850
Min
Max
5
10
10
15
15
60
60
90
90
150
150
225
225
350
350
575
575
95
95
125
125
110
110
170
170
220
220
400
400
600
600
1000
1000
1500
1500
2500
2500
0.8
0.01
0.8
VON/OFF < 0.15V
0.05
2
ON/OFF Input
Voltage (4)
High = O/P ON
1.4
Low = O/P OFF
0.55
0.15
0.15
ON/OFF Input Current
VON/OFF = 0
0.01
−2
−2
5
15
15
Output Noise
BW = 300 Hz to 50 kHz,
Voltage (RMS)
COUT = 10 µF
1.6
Units
3
5
VON/OFF < 0.3V
VON/OFF = 5V
en
Max
LP2985I-X.X (2)
3
40
IL = 1 mA
VON/OFF
Min
7
IL = 10 mA
Ground Pin Current
LP2985AI-X.X (2)
1
IL = 1 mA
IGND
Typ
mV
µA
2
1.6
V
µA
30
µV
COUT = 10 µF
45
dB
CBYPASS = 10 nF
Ripple Rejection
(3)
(4)
(5)
4
f = 1 kHz, CBYPASS = 10 nF
IO(SC)
Short Circuit Current
RL = 0 (Steady State) (5)
400
mA
IO(PK)
Peak Output Current
VOUT ≥ Vo(NOM) −5%
350
mA
Dropout voltage is defined as the input to output differential at which the output voltage drops 100 mV below the value measured with a
1V differential.
The ON/OFF input must be properly driven to prevent possible misoperation. For details, refer to APPLICATION HINTS.
The LP2985-N has foldback current limiting which allows a high peak current when VOUT > 0.5V, and then reduces the maximum output
current as VOUT is forced to ground (see TYPICAL PERFORMANCE CHARACTERISTICS curves).
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
TYPICAL PERFORMANCE CHARACTERISTICS
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
VOUT vs Temperature
Short-Circuit Current
Figure 3.
Figure 4.
Short-Circuit Current
Short Circuit Current vs Output Voltage
Figure 5.
Figure 6.
Ripple Rejection
Ripple Rejection
Figure 7.
Figure 8.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
5
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
6
Ripple Rejection
Ripple Rejection
Figure 9.
Figure 10.
Ripple Rejection
Ripple Rejection
Figure 11.
Figure 12.
Ripple Rejection
Ripple Rejection
Figure 13.
Figure 14.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Ripple Rejection
Output Impedance vs Frequency
Figure 15.
Figure 16.
Output Impedance vs Frequency
Output Noise Density
Figure 17.
Figure 18.
Output Noise Density
Ground Pin vs Load Current
Figure 19.
Figure 20.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
7
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
8
Dropout Voltage vs Temperature
Input Current vs Pin
Figure 21.
Figure 22.
GND Pin Current vs Temperature
Instantaneous Short Circuit Current
Figure 23.
Figure 24.
Load Transient Response
Load Transient Response
Figure 25.
Figure 26.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Load Transient Response
Line Transient Response
Figure 27.
Figure 28.
Line Transient Response
Line Transient Response
Figure 29.
Figure 30.
Line Transient Response
Turn-On Time
Figure 31.
Figure 32.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
9
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Turn-On Time
Turn-On Time
Figure 33.
Figure 34.
Turn-On Time
Figure 35.
10
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
APPLICATION HINTS
EXTERNAL CAPACITORS
Like any low-dropout regulator, the LP2985-N requires external capacitors for regulator stability. These
capacitors must be correctly selected for good performance.
Input Capacitor
An input capacitor whose capacitance is ≥ 1 µF is required between the LP2985-N input and ground (the amount
of capacitance may be increased without limit).
This capacitor must be located a distance of not more than 1 cm from the input pin and returned to a clean
analog ground. Any good quality ceramic, tantalum, or film capacitor may be used at the input.
Important: Tantalum capacitors can suffer catastrophic failure due to surge current when connected to a lowimpedance source of power (like a battery or very large capacitor). If a Tantalum capacitor is used at the input, it
must be ensured by the manufacturer to have a surge current rating sufficient for the application.
There are no requirements for ESR on the input capacitor, but tolerance and temperature coefficient must be
considered when selecting the capacitor to ensure the capacitance will be ≥ 1 µF over the entire operating
temperature range.
Output Capacitor
The LP2985-N is designed specifically to work with ceramic output capacitors, utilizing circuitry which allows the
regulator to be stable across the entire range of output current with an output capacitor whose ESR is as low as
5 mΩ. It may also be possible to use Tantalum or film capacitors at the output, but these are not as attractive for
reasons of size and cost (see CAPACITOR CHARACTERISTICS).
The output capacitor must meet the requirement for minimum amount of capacitance and also have an ESR
(equivalent series resistance) value which is within the stable range. Curves are provided which show the stable
ESR range as a function of load current (see Figure 36).
Figure 36. ESR Graph
Important: The output capacitor must maintain its ESR within the stable region over the full operating
temperature range of the application to assure stability.
The LP2985-N requires a minimum of 2.2 µF on the output (output capacitor size can be increased without limit).
It is important to remember that capacitor tolerance and variation with temperature must be taken into
consideration when selecting an output capacitor so that the minimum required amount of output capacitance is
provided over the full operating temperature range. It should be noted that ceramic capacitors can exhibit large
changes in capacitance with temperature (see CAPACITOR CHARACTERISTICS). The output capacitor must be
located not more than 1 cm from the output pin and returned to a clean analog ground.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
11
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
Noise Bypass Capacitor
Connecting a 10 nF capacitor to the Bypass pin significantly reduces noise on the regulator output. It should be
noted that the capacitor is connected directly to a high-impedance circuit in the bandgap reference.
Because this circuit has only a few microamperes flowing in it, any significant loading on this node will cause a
change in the regulated output voltage. For this reason, DC leakage current through the noise bypass capacitor
must never exceed 100 nA, and should be kept as low as possible for best output voltage accuracy.
The types of capacitors best suited for the noise bypass capacitor are ceramic and film. High-quality ceramic
capacitors with either NPO or COG dielectric typically have very low leakage. 10 nF polypropolene and
polycarbonate film capacitors are available in small surface-mount packages and typically have extremely low
leakage current.
CAPACITOR CHARACTERISTICS
The LP2985-N was designed to work with ceramic capacitors on the output to take advantage of the benefits
they offer: for capacitance values in the 2.2 µF to 4.7 µF range, ceramics are the least expensive and also have
the lowest ESR values (which makes them best for eliminating high-frequency noise). The ESR of a typical 2.2
µF ceramic capacitor is in the range of 10 mΩ to 20 mΩ, which easily meets the ESR limits required for stability
by the LP2985-N.
One disadvantage of ceramic capacitors is that their capacitance can vary with temperature. Most large value
ceramic capacitors (≥ 2.2 µF) are manufactured with the Z5U or Y5V temperature characteristic, which results in
the capacitance dropping by more than 50% as the temperature goes from 25°C to 85°C.
This could cause problems if a 2.2 µF capacitor were used on the output since it will drop down to approximately
1 µF at high ambient temperatures (which could cause the LM2985 to oscillate). If Z5U or Y5V capacitors are
used on the output, a minimum capacitance value of 4.7 µF must be observed.
A better choice for temperature coefficient in ceramic capacitors is X7R, which holds the capacitance within
±15%. Unfortunately, the larger values of capacitance are not offered by all manufacturers in the X7R dielectric.
Tantalum
Tantalum capacitors are less desirable than ceramics for use as output capacitors because they are more
expensive when comparing equivalent capacitance and voltage ratings in the 1 µF to 4.7 µF range.
Another important consideration is that Tantalum capacitors have higher ESR values than equivalent size
ceramics. This means that while it may be possible to find a Tantalum capacitor with an ESR value within the
stable range, it would have to be larger in capacitance (which means bigger and more costly) than a ceramic
capacitor with the same ESR value.
It should also be noted that the ESR of a typical Tantalum will increase about 2:1 as the temperature goes from
25°C down to −40°C, so some guard band must be allowed.
On/Off Input Operation
The LP2985-N is shut off by driving the ON/OFF input low, and turned on by pulling it high. If this feature is not to
be used, the ON/OFF input should be tied to VIN to keep the regulator output on at all times.
To assure proper operation, the signal source used to drive the ON/OFF input must be able to swing above and
below the specified turn-on/turn-off voltage thresholds listed in the ELECTRICAL CHARACTERISTICS section
under VON/OFF. To prevent mis-operation, the turn-on (and turn-off) voltage signals applied to the ON/OFF input
must have a slew rate which is ≥ 40 mV/µs.
CAUTION
The regulator output voltage cannot be ensured if a slow-moving AC (or DC) signal is
applied that is in the range between the specified turn-on and turn-off voltages listed
under the electrical specification VON/OFF (see ELECTRICAL CHARACTERISTICS).
12
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
LP2985-N
www.ti.com
SNVS018V – MARCH 2000 – REVISED JUNE 2013
REVERSE INPUT-OUTPUT VOLTAGE
The PNP power transistor used as the pass element in the LP2985-N has an inherent diode connected between
the regulator output and input. During normal operation (where the input voltage is higher than the output) this
diode is reverse-biased).
VIN
VOUT
PNP
GND
Figure 37. Reverse Current Path
However, if the output is pulled above the input, this diode will turn ON and current will flow into the regulator
output. In such cases, a parasitic SCR can latch which will allow a high current to flow into VIN (and out the
ground pin), which can damage the part.
In any application where the output may be pulled above the input, an external Schottky diode must be
connected from VIN to VOUT (cathode on VIN, anode on VOUT), to limit the reverse voltage across the LP2985-N to
0.3V (see ABSOLUTE MAXIMUM RATINGS).
SCHOTTKY DIODE
VIN
VOUT
PNP
GND
Figure 38. Reverse Current Protection
DSBGA MOUNTING
The DSBGA package requires specific mounting techniques which are detailed in Texas Instruments Application
Note 1112 (SNVA009). Referring to the section Surface Mount Technology (SMT) Assembly Considerations,
it should be noted that the pad style which must be used with the 5-pin package is the NSMD (non-solder mask
defined) type.
For best results during assembly, alignment ordinals on the PC board may be used to facilitate placement of the
DSBGA device.
DSBGA LIGHT SENSITIVITY
Exposing the DSBGA device to direct sunlight will cause misoperation of the device. Light sources such as
Halogen lamps can also affect electrical performance if brought near to the device.
The wavelenghts which have the most detrimental effect are reds and infra-reds, which means that the
fluorescent lighting used inside most buildings has very little effect on performance. A DSBGA test board was
brought to within 1 cm of a fluorescent desk lamp and the effect on the regulated output voltage was negligible,
showing a deviation of less than 0.1% from nominal.
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
13
LP2985-N
SNVS018V – MARCH 2000 – REVISED JUNE 2013
www.ti.com
REVISION HISTORY
Changes from Revision U (April 2013) to Revision V
•
14
Page
Changed layout of National Data Sheet to TI format .......................................................................................................... 13
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LP2985-N
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985AIM5-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LAUA
LP2985AIM5-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAUA
LP2985AIM5-2.7
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LALA
LP2985AIM5-2.7/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LALA
LP2985AIM5-2.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0KA
LP2985AIM5-2.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0KA
LP2985AIM5-2.9
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LAXA
LP2985AIM5-2.9/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAXA
LP2985AIM5-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0OA
LP2985AIM5-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0OA
LP2985AIM5-3.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0PA
LP2985AIM5-3.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0PA
LP2985AIM5-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0RA
LP2985AIM5-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0RA
LP2985AIM5-3.6
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0SA
LP2985AIM5-3.6/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0SA
LP2985AIM5-3.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0YA
LP2985AIM5-3.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0YA
LP2985AIM5-4.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0TA
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985AIM5-4.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0TA
LP2985AIM5-4.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LA7A
LP2985AIM5-4.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LA7A
LP2985AIM5-5.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0UA
LP2985AIM5-5.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0UA
LP2985AIM5-5.7/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LP2985AIM5-6.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LF6A
LP2985AIM5-6.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LF6A
LP2985AIM5X-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LAUA
LP2985AIM5X-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAUA
LP2985AIM5X-2.6
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LCEA
LP2985AIM5X-2.6/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LCEA
LP2985AIM5X-2.7
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
LALA
LP2985AIM5X-2.7/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LALA
LP2985AIM5X-2.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0KA
LP2985AIM5X-2.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0KA
LP2985AIM5X-2.9
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LAXA
LP2985AIM5X-2.9/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAXA
LP2985AIM5X-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0OA
Addendum-Page 2
LKTA
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985AIM5X-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0OA
LP2985AIM5X-3.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0PA
LP2985AIM5X-3.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0PA
LP2985AIM5X-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0RA
LP2985AIM5X-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0RA
LP2985AIM5X-3.6
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0SA
LP2985AIM5X-3.6/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0SA
LP2985AIM5X-3.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0YA
LP2985AIM5X-3.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0YA
LP2985AIM5X-4.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0TA
LP2985AIM5X-4.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0TA
LP2985AIM5X-4.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LA7A
LP2985AIM5X-4.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LA7A
LP2985AIM5X-5.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0UA
LP2985AIM5X-5.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0UA
LP2985AIM5X-5.7/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LP2985AIM5X-6.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LF6A
LP2985AIM5X-6.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LF6A
LP2985AITL-3.3/NOPB
ACTIVE
DSBGA
YZR
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
Addendum-Page 3
LKTA
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985AITLX-3.3/NOPB
ACTIVE
DSBGA
YZR
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985AITP-2.6/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985AITP-2.7/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985AITP-2.8/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985AITP-2.9/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985AITP-3.0/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985AITP-3.3/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985AITP-5.0/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985AITPX-2.5/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-2.6/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-2.7/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-2.8/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-2.9/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-3.0/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985AITPX-3.3/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985AITPX-5.0/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985IM5-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LAUB
LP2985IM5-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAUB
Addendum-Page 4
5
-40 to 125
5
5
-40 to 125
5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985IM5-2.7
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
LALB
LP2985IM5-2.7/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LALB
LP2985IM5-2.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0KB
LP2985IM5-2.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0KB
LP2985IM5-2.9
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LAXB
LP2985IM5-2.9/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAXB
LP2985IM5-3.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0OB
LP2985IM5-3.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0OB
LP2985IM5-3.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0PB
LP2985IM5-3.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0PB
LP2985IM5-3.2
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0QB
LP2985IM5-3.2/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0QB
LP2985IM5-3.3
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0RB
LP2985IM5-3.3/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
-40 to 125
L0RB
LP2985IM5-3.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LAIB
LP2985IM5-3.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAIB
LP2985IM5-3.6
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0SB
LP2985IM5-3.6/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0SB
LP2985IM5-3.8
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0YB
Addendum-Page 5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985IM5-3.8/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0YB
LP2985IM5-4.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0TB
LP2985IM5-4.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
-40 to 125
L0TB
LP2985IM5-4.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
LA7B
LP2985IM5-4.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LA7B
LP2985IM5-5.0
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
L0UB
LP2985IM5-5.0/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
-40 to 125
L0UB
LP2985IM5-5.7/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LKTB
LP2985IM5-6.1
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
LF6B
LP2985IM5-6.1/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LF6B
LP2985IM5X-2.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LAUB
LP2985IM5X-2.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAUB
LP2985IM5X-2.7
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
LALB
LP2985IM5X-2.7/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LALB
LP2985IM5X-2.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0KB
LP2985IM5X-2.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0KB
LP2985IM5X-2.9
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
LAXB
LP2985IM5X-2.9/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LAXB
LP2985IM5X-3.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0OB
Addendum-Page 6
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985IM5X-3.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0OB
LP2985IM5X-3.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0PB
LP2985IM5X-3.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0PB
LP2985IM5X-3.3
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0RB
LP2985IM5X-3.3/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
-40 to 125
L0RB
LP2985IM5X-3.6
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0SB
LP2985IM5X-3.6/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0SB
LP2985IM5X-3.8
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0YB
LP2985IM5X-3.8/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0YB
LP2985IM5X-4.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0TB
LP2985IM5X-4.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
L0TB
LP2985IM5X-4.5
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
LA7B
LP2985IM5X-4.5/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LA7B
LP2985IM5X-5.0
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
-40 to 125
L0UB
LP2985IM5X-5.0/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
SN
Level-1-260C-UNLIM
-40 to 125
L0UB
LP2985IM5X-5.7/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LKTB
LP2985IM5X-6.1
ACTIVE
SOT-23
DBV
5
3000
TBD
Call TI
Call TI
LF6B
LP2985IM5X-6.1/NOPB
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
LF6B
LP2985ITL-3.3/NOPB
ACTIVE
DSBGA
YZR
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
Addendum-Page 7
-40 to 125
5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LP2985ITLX-3.3/NOPB
ACTIVE
DSBGA
YZR
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985ITP-2.5/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-2.6/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-2.7/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985ITP-2.8/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-2.9/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-3.0/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-3.3/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITP-5.0/NOPB
ACTIVE
DSBGA
YPB
5
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
5
LP2985ITPX-2.6/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985ITPX-2.7/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985ITPX-2.8/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985ITPX-2.9/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985ITPX-3.0/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
LP2985ITPX-3.3/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
LP2985ITPX-5.0/NOPB
ACTIVE
DSBGA
YPB
5
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
5
(1)
5
5
-40 to 125
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
Addendum-Page 8
5
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 9
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
LP2985AIM5-2.5
SOT-23
DBV
5
1000
178.0
8.4
LP2985AIM5-2.5/NOPB
SOT-23
DBV
5
1000
178.0
LP2985AIM5-2.7
SOT-23
DBV
5
1000
178.0
LP2985AIM5-2.7/NOPB
SOT-23
DBV
5
1000
LP2985AIM5-2.8
SOT-23
DBV
5
LP2985AIM5-2.8/NOPB
SOT-23
DBV
LP2985AIM5-2.9
SOT-23
DBV
LP2985AIM5-2.9/NOPB
SOT-23
W
Pin1
(mm) Quadrant
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
8.4
3.2
3.2
1.4
4.0
8.0
Q3
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.6
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.6/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-3.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LP2985AIM5-4.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-4.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-4.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-4.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-5.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-5.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-5.7/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-6.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5-6.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.5
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.5/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.6/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.7/NOPB SOT-23
LP2985AIM5X-2.6
LP2985AIM5X-2.7
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-2.9/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-3.0/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-3.1/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-3.3/NOPB SOT-23
LP2985AIM5X-2.8
LP2985AIM5X-2.9
LP2985AIM5X-3.0
LP2985AIM5X-3.1
LP2985AIM5X-3.3
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-3.6/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-3.8/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-4.0/NOPB SOT-23
LP2985AIM5X-3.6
LP2985AIM5X-3.8
LP2985AIM5X-4.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-4.5/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-4.5
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-5.0/NOPB SOT-23
LP2985AIM5X-5.0
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-5.7/NOPB SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AIM5X-6.1/NOPB SOT-23
LP2985AIM5X-6.1
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985AITL-3.3/NOPB
DSBGA
YZR
5
250
178.0
8.4
1.14
1.47
0.76
4.0
8.0
Q1
LP2985AITLX-3.3/NOPB
DSBGA
YZR
5
3000
178.0
8.4
1.14
1.47
0.76
4.0
8.0
Q1
LP2985AITP-2.6/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985AITP-2.7/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985AITP-2.8/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
SPQ
LP2985AITP-2.9/NOPB
DSBGA
YPB
5
250
178.0
8.4
LP2985AITP-3.0/NOPB
DSBGA
YPB
5
250
178.0
8.4
LP2985AITP-3.3/NOPB
DSBGA
YPB
5
250
178.0
LP2985AITP-5.0/NOPB
DSBGA
YPB
5
250
178.0
LP2985AITPX-2.5/NOPB DSBGA
YPB
5
3000
LP2985AITPX-2.6/NOPB DSBGA
YPB
5
LP2985AITPX-2.7/NOPB DSBGA
YPB
5
LP2985AITPX-2.8/NOPB DSBGA
YPB
LP2985AITPX-2.9/NOPB DSBGA
LP2985AITPX-3.0/NOPB DSBGA
LP2985AITPX-3.3/NOPB DSBGA
LP2985AITPX-5.0/NOPB DSBGA
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
1.02
1.19
0.66
4.0
8.0
Q1
1.02
1.19
0.66
4.0
8.0
Q1
8.4
1.02
1.19
0.66
4.0
8.0
Q1
8.4
1.02
1.19
0.66
4.0
8.0
Q1
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985IM5-2.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.7
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.7/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.9
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-2.9/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.2
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.2/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.3
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.3/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.6
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.6/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.8
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-3.8/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-4.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-4.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-4.5
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-4.5/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-5.0
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-5.0/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-5.7/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-6.1
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5-6.1/NOPB
SOT-23
DBV
5
1000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
LP2985IM5X-2.5
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.5/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.7
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.7/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.8/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.9
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-2.9/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.0
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.0/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.1
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.1/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.3
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.3/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.6
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.6/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.8
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-3.8/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-4.0
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-4.0/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-4.5
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-4.5/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-5.0
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-5.0/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-5.7/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-6.1
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985IM5X-6.1/NOPB
SOT-23
DBV
5
3000
178.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
LP2985ITL-3.3/NOPB
DSBGA
YZR
5
250
178.0
8.4
1.14
1.47
0.76
4.0
8.0
Q1
LP2985ITLX-3.3/NOPB
DSBGA
YZR
5
3000
178.0
8.4
1.14
1.47
0.76
4.0
8.0
Q1
LP2985ITP-2.5/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-2.6/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-2.7/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-2.8/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-2.9/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-3.0/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-3.3/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITP-5.0/NOPB
DSBGA
YPB
5
250
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-2.6/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-2.7/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-2.8/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-2.9/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-3.0/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
LP2985ITPX-3.3/NOPB
DSBGA
YPB
5
3000
178.0
8.4
1.02
1.19
0.66
4.0
8.0
Q1
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
LP2985ITPX-5.0/NOPB
Package Package Pins
Type Drawing
SPQ
DSBGA
3000
YPB
5
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
178.0
8.4
1.02
B0
(mm)
K0
(mm)
P1
(mm)
1.19
0.66
4.0
W
Pin1
(mm) Quadrant
8.0
Q1
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2985AIM5-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.7
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.7/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.9
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-2.9/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.6
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.6/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2985AIM5-3.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-3.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-4.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-4.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-4.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-4.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-5.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-5.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-5.7/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-6.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5-6.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985AIM5X-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.6
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.6/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.7
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.7/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.9
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-2.9/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.6
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.6/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-3.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-4.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-4.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-4.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-4.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-5.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-5.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-5.7/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-6.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AIM5X-6.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985AITL-3.3/NOPB
DSBGA
YZR
5
250
210.0
185.0
35.0
LP2985AITLX-3.3/NOPB
DSBGA
YZR
5
3000
210.0
185.0
35.0
LP2985AITP-2.6/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITP-2.7/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
Pack Materials-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2985AITP-2.8/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITP-2.9/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITP-3.0/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITP-3.3/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITP-5.0/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985AITPX-2.5/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-2.6/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-2.7/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-2.8/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-2.9/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-3.0/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-3.3/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985AITPX-5.0/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985IM5-2.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.7
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.7/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.9
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-2.9/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.2
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.2/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.3
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.3/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.6
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.6/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.8
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-3.8/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-4.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-4.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-4.5
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-4.5/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-5.0
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-5.0/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-5.7/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-6.1
SOT-23
DBV
5
1000
210.0
185.0
35.0
LP2985IM5-6.1/NOPB
SOT-23
DBV
5
1000
210.0
185.0
35.0
Pack Materials-Page 7
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LP2985IM5X-2.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.7
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.7/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.9
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-2.9/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.3
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.3/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.6
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.6/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.8
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-3.8/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-4.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-4.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-4.5
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-4.5/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-5.0
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-5.0/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-5.7/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-6.1
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985IM5X-6.1/NOPB
SOT-23
DBV
5
3000
210.0
185.0
35.0
LP2985ITL-3.3/NOPB
DSBGA
YZR
5
250
210.0
185.0
35.0
LP2985ITLX-3.3/NOPB
DSBGA
YZR
5
3000
210.0
185.0
35.0
LP2985ITP-2.5/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-2.6/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-2.7/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-2.8/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-2.9/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-3.0/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-3.3/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITP-5.0/NOPB
DSBGA
YPB
5
250
210.0
185.0
35.0
LP2985ITPX-2.6/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-2.7/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-2.8/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-2.9/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-3.0/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-3.3/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
LP2985ITPX-5.0/NOPB
DSBGA
YPB
5
3000
210.0
185.0
35.0
Pack Materials-Page 8
MECHANICAL DATA
YPB0005
D
0.5±0.045
E
TPA05XXX (Rev C)
D: Max = 1.464 mm, Min =1.403 mm
E: Max = 1.095 mm, Min =1.034 mm
4215098/A
NOTES:
A. All linear dimensions are in millimeters. Dimensioning and tolerancing per ASME Y14.5M-1994.
B. This drawing is subject to change without notice.
www.ti.com
12/12
MECHANICAL DATA
YZR0005xxx
D
0.600±0.075
E
TLA05XXX (Rev C)
D: Max = 1.464 mm, Min =1.403 mm
E: Max = 1.095 mm, Min =1.034 mm
4215043/A
NOTES:
A. All linear dimensions are in millimeters. Dimensioning and tolerancing per ASME Y14.5M-1994.
B. This drawing is subject to change without notice.
www.ti.com
12/12
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages