ON MC100LVEL92DWG 5v triple pecl input to lvpecl output translator Datasheet

MC100LVEL92
5VTriple PECL Input to
LVPECL Output Translator
Description
The MC100LVEL92 is a triple PECL input to LVPECL output
translator. The device receives standard PECL signals and translates
them to differential LVPECL output signals.
To accomplish the PECL to LVPECL level translation, the
MC100LVEL92 requires three power rails. The VCC supply is to be
connected to the standard 5 V PECL supply, the LVCC supply is to be
connected to the 3.3 V LVPECL supply, and Ground is connected to
the system ground plane. Both the VCC and LVCC should be bypassed
to ground with 0.01 mf capacitors.
The PECL VBB pin, an internally generated voltage supply, is
available to this device only. For single-ended input conditions, the
unused differential input is connected to VBB as a switching reference
voltage. VBB may also rebias AC coupled inputs. When used,
decouple VBB and VCC via a 0.01 mF capacitor and limit current
sourcing or sinking to 0.5 mA. When not used, VBB should be
left open.
Features
http://onsemi.com
SO−20 WB
DW SUFFIX
CASE 751D
MARKING DIAGRAM*
20
• 500 ps Propagation Delays
• 5 V and 3.3 V Supplies Required
• ESD Protection: Human Body Model; >2 kV,
•
•
•
•
•
•
•
•
•
•
100LVEL92
AWLYYWWG
Machine Model; >200 V
The 100 Series Contains Temperature Compensation
LVPECL Operating Range: LVCC = 3.0 V to 3.8 V
PECL Operating Range: VCC = 4.5 V to 5.5 V
Internal Input Pulldown Resistors
Q Output will Default LOW with Inputs Open or < GND + 1.3 V
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
Moisture Sensitivity Level 1
For Additional Information, see Application Note AND8003/D
Flammability Rating: UL 94 V−0 @ 0.125 in,
Oxygen Index 28 to 34
Transistor Count = 247 devices
Pb−Free Packages are Available*
1
A
WL
YY
WW
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
November, 2006 − Rev. 11
1
Publication Order Number:
MC100LVEL92/D
MC100LVEL92
VCC
Q0
20
19
Q0 LVCC
18 17
Q1
Q1
16
15
LVCC Q2
14
13
LVPECL
PECL
PECL
PECL
1
2
3
VCC
D0
D0
4
5
6
D1
D1
VCC
12
11
7
8
9
10
VBB PECL
LVPECL
VBB PECL
LVPECL
Q2
D2
D2
GND
Table 1. PIN DESCRIPTION
PIN
FUNCTION
Dn, Dn
Qn, Qn
PECL VBB
LVCC
VCC
GND
PECL Inputs
LVPECL Outputs
PECL Reference Voltage Output
LVPECL Power Supply
PECL Power Supply
Common Ground Rail
Warning: All VCC, LVCC, and GND pins must be externally connected
to Power Supply to guarantee proper operation.
Figure 1. Logic Diagram and Pinout: SO−20 WB (Top View)
Table 2. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
Condition 2
Rating
Unit
VCC
PECL Power Supply
GND = 0 V
8 to 0
V
LVCC
LVPECL Power Supply
GND = 0 V
8 to 0
V
VI
PECL Input Voltage
GND = 0 V
6 to 0
V
Iout
Output Current
Continuous
Surge
50
100
mA
mA
IBB
PECL VBB Sink/Source
± 0.5
mA
TA
Operating Temperature Range
−40 to +85
°C
Tstg
Storage Temperature Range
−65 to +150
°C
qJA
Thermal Resistance (Junction−to−Ambient)
0 lfpm
500 lfpm
SOIC−20 WB
SOIC−20 WB
90
60
°C/W
°C/W
qJC
Thermal Resistance (Junction−to−Case)
Standard Board
SOIC−20 WB
30 to 35
°C/W
Tsol
Wave Solder
<2 to 3 sec @ 248°C
<2 to 3 sec @ 260°C
265
265
°C
Pb
Pb−Free
VI VCC
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may
affect device reliability.
http://onsemi.com
2
MC100LVEL92
Table 3. PECL INPUT DC CHARACTERISTICS VCC = 5.0 V; LVCC = 3.3 V; GND = 0 V Note 1)
−40°C
Symbol
Characteristic
Min
Typ
25°C
Max
Min
Typ
Min
Typ
Unit
12
mA
PECL Power Supply Current
VIH
Input HIGH Voltage (Single−Ended)
3835
4120
3835
4120
3835
4120
mV
VIL
Input LOW Voltage (Single−Ended)
3190
3515
3190
3525
3190
3525
mV
PECL VBB
Output Voltage Reference
3.62
3.74
3.62
3.74
3.62
3.74
V
VIHCMR
Input HIGH Voltage Common Mode
Range (DIfferential) (Note 2)
Vpp < 500 mV
Vpp y 500 mV
1.3
1.5
4.8
4.8
1.2
1.4
4.8
4.8
1.2
1.4
4.8
4.8
V
V
150
mA
Input HIGH Current
IIL
Input LOW Current
12
Max
IVCC
IIH
12
85°C
Max
150
D
D
0.5
−600
150
0.5
−600
0.5
−600
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. Input parameters vary 1:1 with VCC. VCC can vary 4.5 V to 5.5 V.
2. VIHCMR min varies 1:1 with GND. VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPPmin
and 1.0 V.
Table 4. LVPECL OUTPUT DC CHARACTERISTICS VCC = 5.0 V; LVCC = 3.3 V; GND = 0 V (Note 3)
−40°C
Symbol
Characteristic
25°C
Min
Typ
Max
85°C
Min
Typ
Max
20
Min
Typ
Max
Unit
ILVCC
LVPECL Power Supply Current
21
mA
VOH
Output HIGH Voltage (Note 4)
2215
2295
2420
2275
2345
2420
20
2275
2345
2420
mV
VOL
Output LOW Voltage (Note 4)
1470
1605
1745
1490
1595
1680
1490
1595
1680
mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Output parameters vary 1:1 with LVCC. VCC can vary 3.0 V to 3.8 V.
4. Outputs are terminated through a 50 W resistor to LVCC − 2.0 V.
http://onsemi.com
3
MC100LVEL92
Table 5. AC CHARACTERISTICS VCC = 5.0 V; LVCC = 3.3 V; GND = 0 V (Note 5)
−40°C
Symbol
Characteristic
Min
25°C
Typ
Max
Min
85°C
Typ
Max
Min
fmax
Maximum Toggle Frequency
tPLH
tPHL
Propagation Delay
D to Q
tSKEW
Skew
tJITTER
Cycle−to−Cycle Jitter
VPP
Input Swing (Note 8)
150
1000
150
1000
tr
tf
Output Rise/Fall Times Q
(20% − 80%)
270
530
270
530
TBD
Diff
S.E.
490
440
Output−to−Output (Note 6)
Part−to−Part (Diff) (Note 6)
Duty Cycle (Diff) (Note 7)
TBD
590
590
690
740
20
20
25
100
200
510
460
TBD
Typ
Max
GHz
TBD
610
610
710
760
20
20
25
100
200
530
480
Unit
630
630
730
780
ps
20
20
25
100
200
ps
150
1000
mV
270
530
ps
TBD
ps
TBD
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. LVCC can vary 3.0 V to 3.8 V; VCC can vary 4.5 V to 5.5 V. Outputs are terminated through a 50 W resistor to LVCC − 2.0 V.
6. Skews are valid across specified voltage range, part−to−part skew is for a given temperature.
7. Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device.
8. VPP(min) is the minimum input swing for which AC parameters are guaranteed. The device has a DC gain of ≈40.
Q
Zo = 50 W
D
Receiver
Device
Driver
Device
Q
D
Zo = 50 W
50 W
50 W
VTT
VTT = VCC − 2.0 V
Figure 2. Typical Termination for Output Driver and Device Evaluation
(See Application Note AND8020/D − Termination of ECL Logic Devices.)
http://onsemi.com
4
MC100LVEL92
ORDERING INFORMATION
Package
Shipping †
MC100LVEL92DW
SO−20 WB
38 Units / Rail
MC100LVEL92DWG
SO−20 WB
(Pb−Free)
38 Units / Rail
MC100LVEL92DWR2
SO−20 WB
1000 / Tape & Reel
MC100LVEL92DWR2G
SO−20 WB
(Pb−Free)
1000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
Resource Reference of Application Notes
AN1405/D
− ECL Clock Distribution Techniques
AN1406/D
− Designing with PECL (ECL at +5.0 V)
AN1503/D
− ECLinPSt I/O SPiCE Modeling Kit
AN1504/D
− Metastability and the ECLinPS Family
AN1568/D
− Interfacing Between LVDS and ECL
AN1672/D
− The ECL Translator Guide
AND8001/D
− Odd Number Counters Design
AND8002/D
− Marking and Date Codes
AND8020/D
− Termination of ECL Logic Devices
AND8066/D
− Interfacing with ECLinPS
AND8090/D
− AC Characteristics of ECL Devices
http://onsemi.com
5
MC100LVEL92
PACKAGE DIMENSIONS
SO−20 WB
DW SUFFIX
CASE 751D−05
ISSUE G
A
20
q
X 45 _
E
h
H
M
10X
0.25
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION
SHALL BE 0.13 TOTAL IN EXCESS OF B
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
11
B
M
D
1
10
20X
B
B
0.25
M
T A
S
B
S
L
A
18X
e
A1
SEATING
PLANE
C
T
DIM
A
A1
B
C
D
E
e
H
h
L
q
MILLIMETERS
MIN
MAX
2.35
2.65
0.10
0.25
0.35
0.49
0.23
0.32
12.65
12.95
7.40
7.60
1.27 BSC
10.05
10.55
0.25
0.75
0.50
0.90
0_
7_
ECLinPS are registered trademarks of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MC100LVEL92/D
Similar pages