Diotec BCV27 Surface mount si-epitaxial planartransistor Datasheet

BCV27, BCV47
NPN
Darlington Transistors
Surface mount Si-Epitaxial PlanarTransistors
Si-Epitaxial PlanarTransistoren für die Oberflächenmontage
NPN
Version 2004-01-20
Power dissipation – Verlustleistung
Plastic case
Kunststoffgehäuse
1.1
2.9 ±0.1
0.4
1.3 ±0.1
2.5 max
3
Type
Code
2
1
250 mW
1.9
Dimensions / Maße in mm
1 = B1 2 = E2 3 = C
SOT-23
(TO-236)
Weight approx. – Gewicht ca.
0.01 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
Maximum ratings (TA = 25/C)
Grenzwerte (TA = 25/C)
BCV27
BCV47
Collector-Emitter-voltage
VBE = 0
VCES
30 V
60 V
Collector-Base-voltage
E open
VCB0
40 V
80 V
Emitter-Base-voltage
C open
VEB0
10 V
Power dissipation – Verlustleistung
Ptot
250 mW 1)
Collector current – Kollektorstrom (dc)
IC
500 mA
Peak Collector current – Kollektor-Spitzenstrom
ICM
800 mA
Base current – Basisstrom (dc)
IB
100 mA
Junction temperature – Sperrschichttemperatur
Tj
150/C
Storage temperature – Lagerungstemperatur
TS
- 65…+ 150/C
Characteristics (Tj = 25/C)
Kennwerte (Tj = 25/C)
Min.
Typ.
Max.
ICB0
ICB0
–
–
–
–
100 nA
100 nA
IEB0
–
–
100 nA
–
–
1V
Collector-Base cutoff current – Kollektorreststrom
IE = 0, VCB = 30 V
IE = 0, VCB = 60 V
BCV27
BCV47
Emitter-Base cutoff current – Emitterreststrom
IC = 0, VEB = 10 V
Collector saturation volt. – Kollektor-Sättigungsspg. 2)
IC = 100 mA, IB = 0.1 mA
1
VCEsat
) Mounted on P.C. board with 3 mm2 copper pad at each terminal
Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2
) Tested with pulses tp = 300 :s, duty cycle # 2% – Gemessen mit Impulsen tp = 300 :s, Schaltverhältnis # 2%
8
Darlington Transistors
BCV27, BCV47
Characteristics (Tj = 25/C)
Kennwerte (Tj = 25/C)
Min.
Typ.
Max.
–
–
1.5 V
1
Base saturation voltage – Basis-Sättigungsspannung )
IC = 100 mA, IB = 0.1 mA
VBEsat
DC current gain – Kollektor-Basis-Stromverhältnis 1)
VCE = 5 V, IC = 1 mA
BCV27
BCV47
hFE
hFE
4000
2000
–
–
–
–
VCE = 5 V, IC = 10 mA
BCV27
BCV47
hFE
hFE
10000
4000
–
–
–
–
VCE = 5 V, IC = 100 mA
BCV27
BCV47
hFE
hFE
20000
10000
–
–
–
–
- VBEon
–
–
1.4 V
fT
–
220 MHz
–
Base-Emitter voltage – Basis-Emitter-Spannung 1)
VCE = 5 V, IC = 10 mA
Gain-Bandwidth Product – Transitfrequenz
VCE = 5 V, IC = 10 mA, f = 100 MHz
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
420 K/W 2)
RthA
Recommended complementary PNP transistors
Empfohlene komplementäre PNP-Transistoren
Marking – Stempelung
BCV26, BCV46
BCV27 = FF
BCV47 = FG
Pinning – Anschlußbelegung
3
T1
T2
1
1
2
2
) Tested with pulses tp = 300 :s, duty cycle # 2% – Gemessen mit Impulsen tp = 300 :s, Schaltverhältnis # 2%
) Mounted on P.C. board with 3 mm2 copper pad at each terminal
Montage auf Leiterplatte mit 3 mm2 Kupferbelag (Lötpad) an jedem Anschluß
9
Similar pages