RSG FKC08 8 watts output power Datasheet

FKC08 SERIES
8 WATTS
DC-DC CONVERTER
FEATURES
• 8 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 2A
• STANDARD 1.25 X 0.80 X 0.40 INCH
• HIGH EFFICIENCY UP TO 88%
• 2:1 WIDE INPUT VOLTAGE RANGE
• FIVE-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY (300kHz)
• STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE
• CE MARK MEETS 2006/95/EC, 2011/95/EC AND 2004/108/EC
• SAFETY MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2011/65/EU
OPTIONS
SMD TYPE
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FKC08 series offer 8 watts of output power from a package in an IC
compatible 24pin DIP configuration. FKC08 series have 2:1 wide input voltage of
9-18, 18-36 and 36-75VDC. The FKC08 have features 1600VDC of isolation, short
circuit protection and as well as five sided shielding.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
Output power
8 Watts, max.
Voltage accuracy
± 1%
Minimum load
0%
Line regulation
LL to HL at Full Load
± 0.2%
Single (DIP)
No Load to Full Load Single (SMD)
Dual (SMD,DIP)
Load regulation
± 0.5%
± 1%
± 1%
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
Ripple and noise
± 5%
20MHz bandwidth
See table
±0.02% / ºC, max.
Temperature coefficient
Transient response recovery time 25% load step change
200µs
Over load protection
150%
% of FL at nominal input
Short circuit protection
Continuous, automatics recovery
GENERAL SPECIFICATIONS
See table
Input to Output
Input(Output) to Case
Isolation resistance
500VDC
Isolation capacitance
Switching frequency
Case material
Base material
Potting material
Dimensions
Weight
MTBF (Note 1)
Page 1 of 3
1600VDC, min. 1minute
DIP 1600VDC, min. 1minute
SMD 1000VDC, min. 1minute
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
Input filter
Input surge voltage
Pi type
12VDC input
24VDC input
48VDC input
36VDC 100ms,max.
50VDC 100ms,max.
100VDC 100ms,max.
Input reflected ripple current
20mAp-p
Nominal input and
Start up time
Power up
700ms
constant resistive load
Remote ON/OFF (Note 5)
(Positive logic)
DC-DC ON
Open or 3.5V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5mA ~ 0.5mA
Remote off state input current
Nominal input
2.5mA
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
-40ºC ~ +85ºC (with derating)
+100ºC
Storage temperature range
Thermal impedance
-55ºC ~ +125ºC
Nature convection
20ºC/Watt
9
Thermal shock
MIL-STD-810F
300pF, max.
Vibration
MIL-STD-810F
10 ohms, min.
300kHz±10%.
Design meet safety standard
12VDC nominal input
24VDC nominal input
48VDC nominal input
Maximum case temperature
Efficiency
Isolation voltage
Input voltage range
IEC60950-1, UL60950-1, EN60950-1
Nickel-coated copper
Non-conductive black plastic
Epoxy (UL94-V0)
1.25 X 0.80 X 0.40 Inch
(31.8 X 20.3 X 10.2 mm)
DIP
16g (0.55oz)
SMD
18g (0.62oz)
BELLCORE TR-NWT-000332
3.053 x 106 hrs
MIL-HDBK-217F
1.213 x 106 hrs
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 6)
EN55022
Class A, Class B
Air
Contact
± 8kV
± 6kV
Perf. Criteria A
ESD
EN61000-4-2
Radiated immunity
EN61000-4-3
10 V/m
Perf. Criteria A
Fast transient (Note 7) EN61000-4-4
± 2kV
Perf. Criteria A
Surge (Note 7)
EN61000-4-5
± 1kV
Perf. Criteria A
Conducted immunity
EN61000-4-6
10 Vr.m.s
Perf. Criteria A
www.pduke.com
2013/6/4
FKC08 SERIES
8 WATTS
Model
Number
Input
Range
Output
Voltage
FKC08-12S33
FKC08-12S05
FKC08-12S12
FKC08-12S15
FKC08-12D05
FKC08-12D12
FKC08-12D15
FKC08-24S33
FKC08-24S05
FKC08-24S12
FKC08-24S15
FKC08-24D05
FKC08-24D12
FKC08-24D15
FKC08-48S33
FKC08-48S05
FKC08-48S12
FKC08-48S15
FKC08-48D05
FKC08-48D12
FKC08-48D15
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
DC-DC CONVERTER
Output Current
Output
Min. load Full load Ripple & Noise
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
2000mA
1500mA
666mA
533mA
± 800mA
± 333mA
± 267mA
2000mA
1500mA
666mA
533mA
± 800mA
± 333mA
± 267mA
2000mA
1500mA
666mA
533mA
± 800mA
± 333mA
± 267mA
(2)
(3)
(4)
No load
Input Current
Eff
(%)
Capacitor
Load max
10mA
15mA
13mA
20mA
15mA
20mA
20mA
10mA
30mA
13mA
15mA
15mA
15mA
13mA
7mA
8mA
10mA
10mA
8mA
8mA
7mA
80
83
88
87
83
87
85
80
83
86
85
82
86
85
80
83
86
86
85
87
87
3300µF
1600µF
350µF
240µF
± 1000µF
± 160µF
± 100µF
3300µF
1600µF
350µF
240µF
± 1000µF
± 160µF
± 100µF
3300µF
1600µF
350µF
240µF
± 1000µF
± 160µF
± 100µF
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
Note
1.
BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC.
MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment).
2. Typical value at nominal input voltage and no load.
3. Typical value at nominal input voltage and full load.
4. Test by minimum input and constant resistive load.
5. The ON/OFF control pin voltage is referenced to –INPUT.
6. The FKC08 series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
7. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Page 2 of 3
www.pduke.com
2013/6/4
FKC08 SERIES
8 WATTS
MECHANICAL DRAWING
DC-DC CONVERTER
:
DIP TYPE
SMD TYPE
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
DIP PIN CONNECTION
SMD PIN CONNECTION
PIN
1
2
3
SINGLE
CTRL
-INPUT
-INPUT
DUAL
CTRL
-INPUT
-INPUT
PIN
SINGLE
DUAL
23
22
+INPUT
+INPUT
+INPUT
+INPUT
9
11
NC
NC
COMMON
-OUTPUT
16
14
-OUTPUT
+OUTPUT
COMMON
+OUTPUT
Page 3 of 3
PIN
1
2
3
SINGLE
CTRL
-INPUT
-INPUT
DUAL
CTRL
-INPUT
-INPUT
PIN
SINGLE
DUAL
23
22
+INPUT
+INPUT
+INPUT
+INPUT
9
11
Others
NC
NC
NC
COMMON
-OUTPUT
NC
16
14
-OUTPUT
+OUTPUT
COMMON
+OUTPUT
www.pduke.com
2013/6/4
Similar pages