OPLINK OFMS12MID0M21 Multi-mode ultra-mini 1x1, 1x2, 2x2 fiber-optic switch Datasheet

Multi-mode Ultra-mini 1x1, 1x2, 2x2
(Add/Drop) Fiber-optic Switch
OFMSMM Series
Product Description
Oplink OFMS ultra-mini fiber-optic switches are ideal for module and system integration
where the unique unilateral input and output fiber configuration is preferred. These
switches are designed for use in re-configurable optical add/drop multiplexers, optical
cross-connect systems, and network switching for fault protection applications.
The opto-mechanical ultra-mini switch can be directly mounted on printed circuit board
(PCB) and offer the same excellent performance characteristics of Oplink’s standard
OFMS series switch products. The OFMS miniature switches are designed to exceed Telcordia standards GR-1221 and GR-1073.
Oplink provides customized design to meet special control and applications. Also, Oplink
offers modular assemblies that integrate other components to form a full function module or subsystem.
Performance Specificationns
Parameters
Min
Wavelength Range (λOp)
Insertion Loss
1
Typ.
Max
770 ~ 860 and/or 1260 or 1360
1x1, 1x2
< 0.5
2x2AD
< 0.6
Unit
nm
dB
Return Loss
> 30
dB
Features
Channel Cross-talk
> 35
dB
 Miniature Size
dB
<4
ms
 Unilateral Input/output Fiber
Configuration
5 ± 10%
VDC
 Bi-directional Operation
mA
 1x1, 1x2 latching or non-latching
configurations
Repeatability
±0.05
Switching Speed
2
Operating Voltage
Driving Current 3
Latching
22
32
Non-latching
31
46
205.5 ± 10%
Latching
Coil Resistance
Ω
145 ± 10%
Non-latching
Cycle Rate
≤10
Durability
10
Operating Temperature (TOp)
 Seam-seal Package
 Highly Stable & Reliable
cycle
7
Operating Power Handling
Hz
 Wide Operating Wavelength Range
500
mW
0
70
°C
Storage Temperature
-40
80
°C
Humidity
<85% RH, or <90%RH for short term
 Network Switching
latching or non-latching, single coil
 Network Protection and Restoration
4
Switch Relay Type
Fiber Type
Nominal
Package Size
50μm or 62.5μm core multi-mode fiber
Bare Fiber Pigtail
900μm Loose Tube Pigtail
29 (L) x 10.5 (W) x 8.0 (H)
mm
38.5 (L) x 10.5 (W) x 8.0 (H)
mm
Applications
 Instrumentation, Testing and
Measurement
Notes:
1) Excluding connectors; add 0.3 dB within λOp and TOp. Based on FOTP-34 method A, steady state equilibrium
launch conditions. Measured using 850nm and 1310nm muti-mode light source.
2) Switching time is defined as the time interval between electrical trigger and 90% of stable optical output.
3) A >20ms DC pulse is recommended for latching type of switch.
4) Short term is defined as less than 96 consecutive hours and less than a total of 15 days over a one year period.
R01.20090525
Multi-mode Ultra-mini 1x1, 1x2, 2x2
(Add/Drop) Fiber-optic Switch
OFMSMM Series
Function Diagram
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
1x1 On/Off Switch
1x2 Switch
2x2 Add/Drop Switch
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
M
OFMS
Type
I
Ultra-mini
1x1 = 11
1x2 = 12
2x2 Add/Drop = 22
M
2
Switch Type
Fiber Length
Latching = 0
Non-latching = 1
Wavelength
850/1310nm = D
850nm = 8
1310nm = 3
0.5 meter = H
1.0 meter = 1
1.5 meter = 5
2.0 meter = 2
Multi-mode
Fiber Type
MMF 50/125 fiber = 1
MMF 62.5/125 fiber = 2
Package Type
P2 = 2 (Ultra-mini)
Connector
Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
R01.20090525
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages