ANADIGICS AMT8210T46L5 1.25 gb/s 1310/1550nm pin-tia Datasheet

AMT8210
1.25 Gb/s 1310/1550nm PIN-TIA
FEATURES
•
1.25 Gb/s differential output TIA
•
DC to 1000 MHz bandwidth
•
+3.3V Operation
•
-27dBm Typical sensitivity
•
1250-1620nm PIN Photodetector
•
Automatic Gain Control (AGC)
•
0dBm Optical Overload
APPLICATIONS
•
Gigabit Ethernet (1.25 Gb/s)
•
Fiber Channel (1.0625 Gb/s)
•
FTTx systems
TO-46 4 pin Ball
Lens Package
TO-46 5 pin Ball
Lens Package
Product Description
The ANADIGICS AMT8210, packaged in a TO46
lens can, is a 3.3V integrated photodetector and
transimpedance amplifier (TIA) used to convert a
long wavelength (1250 to 1620nm) optical input
signal into a differential output voltage. The
AMT8210 has a bandwidth of 900MHz and a
dynamic range of over 27dB. These devices are
readily designed into receivers, transceivers and
transponders for Gigabit Ethernet and Fiber
Channel applications.
VPD
VCC
AGC
OUT
OUTQ
GND
(For the 4 pin header VPD and VCC are connected to the same pin)
Figure 1: Functional Block Diagram
AMT8210
ELECTRICAL CHARACTERISTICS
Table 1: Absolute Maximum Ratings
PARAMETER
Supply Voltage
Optical Input Power
Storage Temperature
MIN
-0.5
- 40
MAX
+3.8
+3
+ 125
UNIT
V
dBm
oC
Stresses in excess of the absolute ratings may cause permanent damage. Functional
operation is not implied under these conditions. Exposure to absolute ratings for extended
periods of time may adversely affect reliability.
Table 2: Electrical Specifications
PARAMETER
Wavelength
Detector Active Area
Sensitivity (1)
Overload
Responsivity 1550nm
Responsivity 1310nm
MIN
1250
-25.0
-
TYP
75
-27
0
0.95
0.85
9.1
MAX
1620
-
1000
50
-
Small signal transimpedance gain (50 Ω)
Small signal 3dB bandwidth
Output resistance
Output voltage swing (differential)
TIA supply voltage
TIA supply current
Power consumption
2.97
-
3.3
21
70
Operating temperature
-40
+25
800
500
3.6
+85
UNIT
nm
um
dB
dBm
A/W
A/W
KΩ
MHz
Ω
mVP-P
V
mA
mW
oC
(1) 1.25Gb/s PRBS 231-1, 1550nm, ER >12dB, BER 10-10
Figure 2: Pin location (4-pin)
Figure 3: Pin location (5-pin)
GND
GND
OUTQ
Table 3: Pin description
NAME
OUT
VCC
OUTQ
GND
OUT
DESCRIPTION
TIA Output (Non-Inverted)
Supply Voltage (+3.3V)
TIA Output (Inverted)
Ground
OUT
OUTQ
VCC
VPD
(Bottom View)
VCC
(Bottom View)
Rev 1.1
2
AMT8210
PACKAGE DIMENSIONS – 5 Pin TO-46
Rev 1.1
3
AMT8210
PACKAGE DIMENSIONS – 4 Pin TO-46
ORDERING INFORMATION
Part Number
AMT8210T46L4
AMT8210T46L5
ANADIGICS, Inc.
829 Flynn Road
Camarillo, California 93012, U.S.A.
Tel: +1 (805) 445-4500
Fax: +1 (805) 445-4502
URL: http://www.anadigics.com
E-mail: [email protected]
PACKAGE DESCRIPTION
4 pin TO-46 Lens Package
5 pin TO-46 Lens Package
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any
time without notice. The product specifications contained in Advanced Product Information sheets and
Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in
Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS
assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the
information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of
an ANADIGICS product in any such application without written consent is prohibited.
Rev 1.1
4
Similar pages