Murata NFA31GD4701014 Smd/block type emi suppression filter Datasheet

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
Chip Ferrite Bead
NF
p
102
Part Numbering
104
Series Line Up
107
Product Detail
110
!Caution/Notice
138
Soldering and Mounting
139
Packaging
145
Design Kits
146
Block Type EMIFILr
Chip Common Mode Choke Coil
Series Introduction
Chip EMIFILr
Chip EMIFILr
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
NFp
Series Introduction
Chip Ferrite Bead
Example of 3 Terminal Capacitor Structure
Ground Terminal
Output (Input) Terminal
Chip 3 terminal capacitor is chip shaped 3 terminal capacitor
designed for noise suppression. Its inner structure like feed
through capacitor makes its ground impedance quite low. Owing
to this structure, 3 terminal capacitor has good noise suppression
effect at high frequency range up to several hundred MHz.
Ground Terminal
Input (Output) Terminal
Ground Terminal
Chip EMIFILr
Inner Feed
Through
Electrode
Cross Section
Series
Equivalent
Circuit
NFM Series
(3 terminal capacitor)
Part Number
NFM18CC
NFM21CC
NFM18PC
NFM18PS
Chip Common Mode Choke Coil
NFM21PC
NFL18ST
NFL / NFW
Series
(LC filter)
NFL18SP
NFL21SP
NFW31SP
NFA21S
Block Type EMIFILr
NFA18S
NFR Series
(RC filter)
NFE Series
Feed through
capacitor with ferrite
cores
NFR21GD
NFA31GD
NFE31PT
NFE61PT
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
102
Chip Ferrite Bead
NFp Series Introduction
0
10
Insertion Loss (dB)
20
Multilayer Capacitor
30
1608 Size 1µF
40
50
60
70
3 Terminal Capacitor
1608 Size 1µF
NFM18PS105
80
90
0.1
1
10
100
1000
Insertion Loss Sample
Features
Chip EMIFILr
Frequency (MHz)
Classification
Applications
Example
NFM_CC
Standard type with
varied capacitance
Noise suppression in
low speed signal lines
· Low speed interface lines,
· sensor
NFM_PC
Meet large current, high
capacitance available,
for power lines
Noise suppression in
power lines
· Individual IC power lines
NFL_ST
T-type filter, effective in
low impedance circuits
NFL_SP
π-type filter, effective in
high impedance circuits
NFW_SP
π-type filter, designed
for low impedance
circuits
NFA_SL
4-line array, suitable for
bus lines or flat cables
Noise suppression in
high speed signal lines
· High speed interface lines
· Bus lines
LCD lines
Camera I/Fs
· High speed analog lines
RGB / D terminal
Limit noise using
resistor, also loop
back to ground
Noise suppression in
signal line with unstable
ground
· Interface lines
· Clock lines
Meet large current,
good high
frequency
performance
because of its feed
through structure
Noise suppression in
power lines / low
impedance lines
· Various power lines
· sensor
Block Type EMIFILr
Sharp insertion
loss curve enables
low damage to
signal waveform
Chip Common Mode Choke Coil
Standard of 3
terminal capacitor
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
103
NFp
Part Numbering
Chip EMIFILr
Chip Ferrite Bead
Capacitor
(Part Number)
NF
M
3D
CC
102
R
1H
3
L
q
w
e
r
t
y
u i o
qProduct ID
yCharacteristics
Product ID
NF
Chip EMIFILr
wStructure
Code
Capacitance Change (Temperature Characteristics)
B
±10%, ±12.5%, +10/-13%
F
+30/-80%, +30/-84%
R
±15%, +15/-18%
Code
Structure
U
-750 ±120ppm/°C
M
Capacitor Type
S
+350 to -1000ppm/°C
A
Capacitor Array Type
Chip EMIFILr
uRated Voltage
eDimensions (LgW)
Code
Rated Voltage
Dimensions (LgW)
EIA
0J
6.3V
18
1.6g0.8mm
0603
1A
10V
21
2.0g1.25mm
0805
1C
16V
3D
3.2g1.25mm
1205
1E
25V
31
3.2g1.6mm
1206
1H
50V
41
4.5g1.6mm
1806
2A
100V
55
5.7g5.0mm
2220
Code
iElectrode/Others (NFM Series)
Chip Common Mode Choke Coil
rFeatures
Code
Electrode
Series
Code
Features
3
Sn Plating
NFM (Except NFM55)
CC
Capacitor Type for Signal Lines
4
Solder Coating
NFM55
PC
Capacitor Type for Large Current
PS
High Loss Type for Large Current
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
iNumber of Circuits (NFAppCC Series)
Code
Number of Circuits
4
4 Circuits
oPackaging
Code
Packaging
L
Embossed Taping (ø180mm Reel)
Bulk
D
Paper Taping (ø180mm Reel)
All series
NFM18/NFM21/NFAppCC
Block Type EMIFILr
B
Series
NFM3D/NFM31/NFM41/NFM55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
104
NFp Chip EMIFILr Part Numbering
NF
L
18 ST
q
w
e
r
X 1C
107
3
L
y u i o
t
qProduct ID
yCharacteristics (NFL/NFW Series)
Product ID
Chip EMIFILr
wStructure
Code
Characteristics
X
Cut-off Frequency
yCharacteristics (NFE Series)
Code
Structure
Code
L
Maltilayer, LC Combined Type
B
±10%
W
Wire Wound, LC Combined Type
C
±20%, ±22%
E
Block, LC Combined Type
D
+20/-30%, +22/-33%
E
+20/-55%, +22/-56%
F
+30/-80%, +22/-82%
eDimensions (LgW)
Capacitance Change (Temperature Characteristics)
Code
Dimensions (LgW)
EIA
R
±15%
18
1.6g0.8mm
0603
U
-750 ±120ppm/ ˚C
21
2.0g1.25mm
0805
Z
Other
31
3.2g1.6mm
1206
61
6.8g1.6mm
2606
rFeatures
uRated Voltage
Code
Rated Voltage
1A
10V
Code
Features
1C
16V
SP
π Circuit for Signal Lines
1E
25V
ST
T Circuit for Signal Lines
1H
50V
PT
T Circuit for Large Current
2A
100V
tCut-off Frequency (NFL/NFW Series)
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Chip EMIFILr
NF
Chip Common Mode Choke Coil
(Part Number)
Chip Ferrite Bead
LC Combined (1)
iElectrode
Code
Electrode
Series
3/7
Sn Plating
NFL
4
Lead Free Solder Coating
NFW
9
Others
NFE
tCapacitance (NFE Series)
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
oPackaging
Packaging
K
Embossed Taping (ø330mm Reel)
NFW31/NFE
NFW31/NFE
L
Embossed Taping (ø180mm Reel)
B
Bulk
D
Paper Taping (ø180mm Reel)
Series
Block Type EMIFILr
Code
NFL18/NFL21/NFE
NFL18/NFL21
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
105
NFp Chip EMIFILr Part Numbering
LC Combined (2)
Chip Ferrite Bead
(Part Number)
NF
A
21
SL
207
X
1A
4
5
q
w
e
r
t
y
u i o !0
qProduct ID
L
yFeatures (2)
Product ID
Code
NF
Chip EMIFILr
X
V
wStructure
Code
Structure
A
Array Type
Expressed by a letter
uRated Voltage
eDimensions (LgW)
Chip EMIFILr
Features
Code
Rated Voltage
1A
10V
iNumber of Circuits
Code
Dimensions (LgW)
EIA
18
1.6g0.8mm
0603
Code
Number of Circuits
21
2.0g1.25mm
0805
4
4 Circuits
rFeatures (1)
oDimensions (T)
Code
Features
Code
Dimensions (T)
SL
L Circuit for Signal Lines
5
Low Profile
SD
L Circuit for Differential Signal
8
Standard
tCut-off Frequency
Expressed by three figures. The unit is in hertz (Hz). The first and
second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
!0Packaging
Code
Packaging
B
Bulk
L
Embossed Taping (ø180mm Reel)
Chip Common Mode Choke Coil
RC Combined
(Part Number)
NF
R
21 GD 470
q
w e
r
2
470
t
y
L
u i
qProduct ID
tCapacitance
Expressed by three figures. The unit is in pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures.
Product ID
NF
Chip EMIFILr
wStructure
Code
Structure
R
RC Combined Type
A
RC Combined Array Type
yResistance
Expressed by three-digit alphanumerics. The unit is in ohm (Ω).
The first and second figures are significant digits, and the third
figure expresses the number of zeros which follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R". In this case, all figures are significant digits.
Block Type EMIFILr
eDimensions (LgW)
uElectrode/Others (NFR Series)
Code
Dimensions (LgW)
EIA
21
2.0g1.25mm
0805
Code
Electrode
31
3.2g1.6mm
1206
2
Sn Plating
rFeatures
uNumber of Circuits (NFAppGD Series)
Code
Features
Code
Number of Circuits
GD
RC Combined Type for Signal Lines
4
4 Circuits
iPackaging
Code
Packaging
L
Embossed Taping (ø180mm Reel)
B
Bulk
D
Paper Taping (ø180mm Reel)
Series
NFR
All Series
NFAppGD
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
106
0603
p121
0805
Capacitor Type
for Signal Lines
p122
1205
p123
1806
p124
Capacitor
Array Type
for Signal Lines
1206
p112
p113
0603
p115
Capacitor Type
for Power Lines
0805
1205
1206
p116
p117
p118
1806
2220
p119
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.7
1.3
1.0
1.0
2.2
Rated
Voltage
Capacitance
Nominal
Cut-off
Frequency
Rated
Current
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
NFM3DCC220U1H3
NFM3DCC470U1H3
NFM3DCC101U1H3
NFM3DCC221R1H3
NFM3DCC471R1H3
NFM3DCC102R1H3
NFM3DCC222R1H3
NFM3DCC223R1H3
NFM41CC220U2A3
NFM41CC470U2A3
NFM41CC101U2A3
NFM41CC221U2A3
NFM41CC471R2A3
NFM41CC102R2A3
NFM41CC222R2A3
NFM41CC223R2A3
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4
NFM18PS474R0J3
NFM18PS105R0J3
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3
NFM18PC225B1A3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105B1C3
NFM21PC225B0J3
NFM21PC475B1A3
NFM3DPC223R1H3
NFM31PC276B0J3
NFM41PC204F1H3
NFM41PC155B1E3
NFM55PC155F1H4
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
100Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
16Vdc
6.3Vdc
6.3Vdc
16Vdc
6.3Vdc
6.3Vdc
6.3Vdc
6.3Vdc
10Vdc
25Vdc
16Vdc
16Vdc
10Vdc
16Vdc
6.3Vdc
10Vdc
50Vdc
6.3Vdc
50Vdc
25Vdc
50Vdc
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
22pF+50%-20%
47pF+50%-20%
100pF+50%-20%
220pF+50%-20%
470pF+50%-20%
1000pF+50%-20%
2200pF+50%-20%
22000pF+50%-20%
22pF+50%-20%
47pF+50%-20%
100pF+50%-20%
220pF+50%-20%
470pF+50%-20%
1000pF+50%-20%
2200pF+50%-20%
22000pF+50%-20%
22pF+20%-20%
47pF+20%-20%
100pF+20%-20%
220pF+20%-20%
470pF+20%-20%
1000pF+20%-20%
2200pF+20%-20%
22000pF+20%-20%
0.47µF+20%-20%
1.0µF+20%-20%
0.1µF+20%-20%
0.22µF+20%-20%
0.47µF+20%-20%
1.0µF+20%-20%
2.2µF+20%-20%
2.2µF+20%-20%
0.1µF+20%-20%
0.22µF+20%-20%
0.47µF+20%-20%
1.0µF+20%-20%
1.0µF+20%-20%
2.2µF+20%-20%
4.7µF+20%-20%
0.022µF+20%-20%
27µF+20%-20%
0.2µF+80%-20%
1.5µF+20%-20%
1.5µF+80%-20%
-
400mA
400mA
500mA
500mA
500mA
600mA
700mA
1000mA
700mA
700mA
700mA
700mA
1000mA
1000mA
1000mA
2000mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
300mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
2A
2A
2A
2A
2A
4A
2A
4A
2A
2A
2A
4A
4A
4A
6A
2A
6A
2A
6A
6A
Chip Ferrite Bead
p120
Part Number
Chip EMIFILr
Size Code Thickness
(Inch)
(mm)
Series Line Up
Chip Common Mode Choke Coil
Type
Chip EMIFILr
Block Type EMIFILr
NFp
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
107
NFp Chip EMIFILr Series Line Up
Type
Size Code Thickness
(Inch)
(mm)
Chip Ferrite Bead
p110
1206
LC Combined Type
for Power Lines
and Signal Lines
p111
2706
Chip EMIFILr
p125
p126
0603
p127
LC Combined
Multilayer Type
for Signal Lines
p128
Chip Common Mode Choke Coil
0805
p129
0603
p130
p131
Block Type EMIFILr
LC Combined
Array Type
for Signal Lines
p132
0805
p133
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
0.6
0.6
0.6
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.6
0.6
0.6
0.6
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.5
0.5
0.5
0.85
0.85
0.85
0.5
0.5
0.85
0.85
0.85
0.85
Part Number
Rated
Voltage
Capacitance
Nominal
Cut-off
Frequency
Rated
Current
NFE31PT220R1E9
NFE31PT470C1E9
NFE31PT101C1E9
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT330B1H9
NFE61PT680B1H9
NFE61PT101Z1H9
NFE61PT181B1H9
NFE61PT361B1H9
NFE61PT681B1H9
NFE61PT102E1H9
NFE61PT472C1H9
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL227V1A45
NFA18SL307V1A45
NFA18SL357V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SL506X1A45
NFA18SD187X1A45
NFA18SD207X1A45
NFA21SL287V1A45
NFA21SL317V1A45
NFA21SL337V1A45
NFA21SL287V1A48
NFA21SL317V1A48
NFA21SL337V1A48
NFA21SL207X1A45
NFA21SL307X1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A48
NFA21SL307X1A48
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
25Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
16Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
10Vdc
22pF+30%-30%
47pF+50%-20%
100pF+80%-20%
220pF+50%-20%
470pF+50%-20%
1500pF+50%-20%
2200pF+50%-50%
33pF+30%-30%
68pF+30%-30%
100pF+30%-30%
180pF+30%-30%
360pF+20%-20%
680pF+30%-30%
1000pF+80%-20%
4700pF+80%-20%
110pF (Typ.)
70pF (Typ.)
50pF (Typ.)
25pF+20%-20%
18pF+20%-20%
10pF+20%-20%
34pF+20%-20%
24pF+20%-20%
19pF+20%-20%
11pF+20%-20%
670pF+20%-20%
240pF+20%-20%
84pF+20%-20%
76pF+20%-20%
44pF+20%-20%
28pF+20%-20%
22pF+20%-20%
19pF+10%-10%
16pF+10%-10%
12pF+10%-10%
-
50MHz
70MHz
100MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz
50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
130MHz
180MHz
200MHz
220MHz
300MHz
350MHz
400MHz
480MHz
50MHz
180MHz
200MHz
280MHz
310MHz
330MHz
280MHz
310MHz
330MHz
200MHz
300MHz
50MHz
80MHz
200MHz
300MHz
6A
6A
6A
6A
6A
6A
6A
2A
2A
2A
2A
2A
2A
2A
2A
75mA
75mA
75mA
150mA
200mA
200mA
100mA
100mA
100mA
100mA
100mA
100mA
150mA
150mA
200mA
200mA
250mA
300mA
300mA
300mA
50mA
50mA
50mA
25mA
100mA
35mA
100mA
100mA
25mA
25mA
25mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
100mA
20mA
20mA
100mA
100mA
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
108
Size Code Thickness
(Inch)
(mm)
p134
LC Combined
Wire Wound Type
for Signal Lines
1206
p136
RC Combined Type
for Signal Lines
0805
p137
1206
Rated
Voltage
Capacitance
Nominal
Cut-off
Frequency
Rated
Current
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
NFR21GD1002202
NFR21GD1004702
NFR21GD4702202
NFR21GD4704702
NFR21GD4706802
NFR21GD4701012
NFR21GD1012202
NFR21GD1014702
NFR21GD1016802
NFR21GD1011012
NFA31GD1006R84
NFA31GD1004704
NFA31GD1001014
NFA31GD4706R84
NFA31GD4703304
NFA31GD4704704
NFA31GD4701014
NFA31GD1016R84
NFA31GD1014704
NFA31GD1011014
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
50Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
6Vdc
10pF+20%-20%
10pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%
10pF+20%-20%
10pF+20%-20%
10pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
47pF+20%-20%
100pF+20%-20%
100pF+20%-20%
100pF+20%-20%
10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
-
50mA
35mA
50mA
35mA
30mA
25mA
50mA
35mA
30mA
25mA
50mA
20mA
15mA
50mA
20mA
20mA
15mA
50mA
20mA
15mA
Block Type EMIFILr
Chip Common Mode Choke Coil
RC Combined
Array Type
for Signal Lines
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Part Number
Chip EMIFILr
Type
Chip Ferrite Bead
NFp Chip EMIFILr Series Line Up
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
109
NFE Series
Universal Type [Power Lines/Signal Lines] Chip EMIFILr
NFE31P
NFE31P
Series (1206 Size)
Chip Ferrite Bead
Meet 6A, T-type filter with built-in ferrite bead.
■ Dimensions
■ Equivalent Circuit
1.0±0.2
0.7±0.2
(1)
(2)
(3)
Input
(1)
1.6±0.15
0.7±0.2
Output
(3)
GND
(2)
No polarity.
3.2±0.35
■ Packaging
1.6±0.15
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
2000
K
330mm Reel Embossed Tape
8000
B
Bulk(Bag)
500
: Electrode
Chip EMIFILr
Universal Type [Power Lines/Signal Lines]
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFE31PT220R1E9p
22pF+30%-30%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT470C1E9p
47pF+50%-20%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT101C1E9p
100pF+80%-20%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT221D1E9p
220pF+50%-20%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT471F1E9p
470pF+50%-20%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT152Z1E9p
1500pF+50%-20%
6A
25Vdc
1000M ohm
-40°C to +85°C
NFE31PT222Z1E9p
2200pF+50%-50%
6A
25Vdc
1000M ohm
-40°C to +85°C
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFE31PT220R1E9
NFE31PT470C1E9
10
NFE31PT101C1E9
Insertion Loss (dB)
Chip Common Mode Choke Coil
Number of Circuit: 1
20
NFE31PT221D1E9
NFE31PT471F1E9
NFE31PT152Z1E9
30
NFE31PT222Z1E9
40
50
60
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
110
NFE Series
Universal Type [Power Lines/Signal Lines] Chip EMIFILr
NFE61P
NFE61P
Series (2706 Size)
■ Dimensions
Chip Ferrite Bead
T-type filter with built-in ferrite bead.
■ Equivalent Circuit
2.6±0.3
0.7±0.2
(1)
(2)
(3)
Input
(1)
Output
(3)
1.6±0.3
0.7±0.2
6.8±0.5
GND
(2)
No polarity.
1.6±0.3
Code
Packaging
Minimum
Quantity
: Electrode
L
180mm Reel Embossed Tape
2500
K
330mm Reel Embossed Tape
8000
B
Bulk(Bag)
500
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFE61PT330B1H9p
33pF+30%-30%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT680B1H9p
68pF+30%-30%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT101Z1H9p
100pF+30%-30%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT181B1H9p
180pF+30%-30%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT361B1H9p
360pF+20%-20%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT681B1H9p
680pF+30%-30%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT102E1H9p
1000pF+80%-20%
2A
50Vdc
1000M ohm
-25°C to +85°C
NFE61PT472C1H9p
4700pF+80%-20%
2A
50Vdc
1000M ohm
-25°C to +85°C
Chip Common Mode Choke Coil
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFE61PT330B1H9
NFE61PT680B1H9
Insertion Loss (dB)
10
NFE61PT101Z1H9
20
NFE61PT181B1H9
NFE61PT361B1H9
30
NFE61PT681B1H9
NFE61PT102E1H9
40
Universal Type [Power Lines/Signal Lines]
Chip EMIFILr
■ Packaging
NFE61PT472C1H9
50
1
10
Frequency (MHz)
100
1000 2000
Block Type EMIFILr
60
0.1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
111
NFM Series
Power Lines Type Chip EMIFILr
NFM18PS
NFM18PS
Series (0603 Size)
3-terminal capacitor for power lines whose ground impedance has reduced.
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
0.8±0.1
(2)
■ Equivalent Circuit
0.15+0.2
–0.1
■ Dimensions
(1) Input
Output (3)
0.15+0.2
–0.1
(1)
0.2 min.
No polarity.
GND
(3)
(2)
(2)
1.6±0.1
0.6±0.1
■ Packaging
0.8+0.2
–0.1
0.4±0.1
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
Chip EMIFILr
Power Lines Type
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM18PS474R0J3p
0.47µF+20%-20%
2A
6.3Vdc
1000M ohm
-55°C to +125°C
NFM18PS105R0J3p
1.0µF+20%-20%
2A
6.3Vdc
500M ohm
-55°C to +105°C
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
Insertion Loss (dB)
NFM18PS474R0J3
NFM18PS105R0J3
40
60
80
100
0.1
1
10
Frequency (MHz)
100
1000
3000
Block Type EMIFILr
Chip Common Mode Choke Coil
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
112
NFM Series
Power Lines Type Chip EMIFILr
NFM18PC
NFM18PC
Series (0603 Size)
4A max, 0603 size chip 3-terminal capacitor for power lines.
NFM18PC (0.1 to 0.47µF, 2.2µF-6.3V)
■ Dimensions
0.25±0.1
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
■ Equivalent Circuit
0.4±0.1
0.8±0.1
Output (3)
0.6±0.1
(1) Input
No polarity.
GND
(2)
0.2 min.
1.6±0.1
(2)
(3)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
(2) 0.2±0.1
(in mm)
■ Dimensions
NFM18PC (1µF, 2.2µF-10V)
0.2 min.
Power Lines Type
Chip EMIFILr
(1)
0.8±0.1
■ Packaging
■ Equivalent Circuit
0.2 min.
(1) Input
(1)
Output (3)
0.8±0.1
(2)
(3)
No polarity.
GND
(2)
0.25±0.1
0.25±0.1
(2)
0.8±0.1
0.4±0.1
1.6±0.1
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM18PC104R1C3p
0.1µF±20%
2A
16Vdc
1000M ohm
-55°C to +125°C
NFM18PC224R0J3p
0.22µF±20%
2A
6.3Vdc
1000M ohm
-55°C to +125°C
NFM18PC474R0J3p
0.47µF±20%
2A
6.3Vdc
1000M ohm
-55°C to +125°C
NFM18PC105R0J3p
1.0µF±20%
4A
6.3Vdc
500M ohm
-55°C to +105°C
NFM18PC225B0J3p
2.2µF±20%
2A
6.3Vdc
200M ohm
-40°C to +85°C
NFM18PC225B1A3p
2.2µF±20%
4A
10Vdc
200M ohm
-40°C to +85°C
Chip Common Mode Choke Coil
■ Packaging
Number of Circuit: 1
Block Type EMIFILr
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFM18PC104R1C3
20
Insertion Loss (dB)
NFM18PC224R0J3
NFM18PC474R0J3
40
60
NFM18PC105R0J3
NFM18PC225B0J3 (6.3V)
NFM18PC225B1A3 (10V)
80
100
0.1
1
10
Frequency (MHz)
100
1000
3000
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
113
Chip Ferrite Bead
EMI
Suppression
Effect
NFM18P Series
• High frequency performance of NFM18PS series
Chip 3 terminal capacitor
(50 ohm - 50 ohm)
0
2 terminal MLCC: 2012 size
(0.1µFx10pcs parallel)
10
20
30
I.L. (dB)
40
NFM18PC105R0J3 1pc
: 1608 size (1.0µF)
50
60
70
80
NFM18PS105R0J3 1pc
: 1608 size (1.0µF)
Chip EMIFILr
Power Lines Type
90
100
0.1
1
10
100
Frequency (MHz)
1000
10000
NFM18PS series has better high frequency performance compared to normal chip 3 terminal capacitors.
• Optimize of bypass capacitors using chip 3 terminal capacitor
Bypass capacitor
chip 3 terminal capacitor
IC
ry
Memo
Amount of parts can be reduced.
• Reduce PCB space
• Reduce mount cost
Chip Common Mode Choke Coil
IC
ry
Memo
Comparison of performance as bypass capacitor
Without capacitor
Micro computer
Block Type EMIFILr
With chip 3 terminal
capacitor (NFM) 1µFx1
With MLCC 0.22µFx4
Micro computer
Inner layer
power pattern
Micro computer
GND
Power line
MLCC
NFM
40
30
20
0
200
400
600
Frequency (MHz)
800
1000
60
Noise Level (dBµV/m)
50
10
MLCC
60
Noise Level (dBµV/m)
Noise Level (dBµV/m)
60
50
40
30
20
10
0
200
400
600
Frequency (MHz)
800
1000
50
40
30
20
10
0
200
400
600
Frequency (MHz)
800
1000
Noise suppression effect of NFM series is better than MLCCs. (1 NFM is better than 4 MLCCs)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
114
NFM Series
Power Lines Type Chip EMIFILr
NFM21P
NFM21P
Series (0805 Size)
6A max, 0805 size chip 3-terminal capacitor for power lines.
■ Dimensions
0.3±0.2
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
■ Equivalent Circuit
0.4±0.2
Output (3)
0.85±0.1
(1) Input
No polarity.
GND
0.6±0.2
(2)
1.25±0.1
2.0±0.2
(2)
■ Packaging
(3)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM21PC104R1E3p
0.1µF+20%-20%
2A
25Vdc
1000M ohm
-55°C to +125°C
NFM21PC224R1C3p
0.22µF+20%-20%
2A
16Vdc
1000M ohm
-55°C to +125°C
NFM21PC474R1C3p
0.47µF+20%-20%
2A
16Vdc
1000M ohm
-55°C to +125°C
NFM21PC105B1A3p
1.0µF+20%-20%
4A
10Vdc
500M ohm
-40°C to +85°C
NFM21PC105B1C3p
1.0µF+20%-20%
4A
16Vdc
500M ohm
-40°C to +85°C
NFM21PC225B0J3p
2.2µF+20%-20%
4A
6.3Vdc
200M ohm
-40°C to +85°C
NFM21PC475B1A3p
4.7µF+20%-20%
6A
10Vdc
100M ohm
-40°C to +85°C
Power Lines Type
Chip EMIFILr
(2)
0.25±0.2
(1)
Number of Circuit: 1
Chip Common Mode Choke Coil
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFM21PC104R1E3
NFM21PC224R1C3
Insertion Loss (dB)
20
NFM21PC474R1C3
NFM21PC105B1A3 (10V)
NFM21PC105B1C3 (16V)
40
60
NFM21PC225B0J3
NFM21PC475B1A3
80
1
10
Frequency (MHz)
100
1000
3000
Block Type EMIFILr
100
0.1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
115
NFM Series
Power Lines Type Chip EMIFILr
NFM3DP
NFM3DP
Series (1205 Size)
1205 size 3-terminal capacitor for power lines.
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
■ Equivalent Circuit
0.7±0.2
■ Dimensions
(1) Input
Output (3)
1.1±0.3
3.2±0.2
No polarity.
1.25±0.2
GND
(2)
(2)
(3)
0.25±0.2
(1)
■ Packaging
(2)
: Electrode
0.3±0.2
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
500
Chip EMIFILr
Power Lines Type
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM3DPC223R1H3p
0.022µF+20%-20%
2A
50Vdc
1000M ohm
-55°C to +125°C
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
20
60
2.0
80
100
0.1
1
10
Frequency (MHz)
100
1000
3000
Rated Current (A)
Insertion Loss (dB)
40
When NFM3DP series is used in operating
temperatures exceeding +85°C, derating
of current is necessary.
Please apply the derating curve shown in
chart according to the operating
temperature.
0.5
0
-55
85
Operating Temperature (˚C)
125
Block Type EMIFILr
Chip Common Mode Choke Coil
NFM3DPC223R1H3
■ Notice (Rating)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
116
NFM Series
Power Lines Type Chip EMIFILr
NFM31P
NFM31P
Series (1206 Size)
6A/27microF, 1206 size chip 3-terminal capacitor for power lines.
■ Dimensions
0.4±0.3
1.1±0.3
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
■ Equivalent Circuit
0.4±0.3
1.6±0.2
Output (3)
1.3±0.2
(1) Input
No polarity.
GND
3.2±0.2
(2)
(2)
(2)
■ Packaging
0.3±0.2
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
3000
B
Bulk(Bag)
500
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM31PC276B0J3p
27µF+20%-20%
6A
6.3Vdc
20M ohm
-40°C to +85°C
Power Lines Type
Chip EMIFILr
(3)
1.6±0.2
(1)
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFM31PC276B0J3
40
60
Chip Common Mode Choke Coil
Insertion Loss (dB)
20
80
1
10
Frequency (MHz)
100
1000
3000
Block Type EMIFILr
100
0.1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
117
NFM Series
Power Lines Type Chip EMIFILr
NFM41P
NFM41P
Series (1806 Size)
6A max, 1806 size chip 3-terminal capacitor for power lines.
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
■ Dimensions
0.4±0.3
■ Equivalent Circuit
1.6±0.3
1.5±0.3
Output (3)
1.0±0.2
(1) Input
No polarity.
GND
0.7 min.
(2)
4.5±0.3
(2)
(3)
(2)
■ Packaging
1.6±0.3
(1)
0.3+0.3
–0.2
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
500
: Electrode
Chip EMIFILr
Power Lines Type
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM41PC204F1H3p
0.2µF+80%-20%
2A
50Vdc
1000M ohm
-55°C to +85°C
NFM41PC155B1E3p
1.5µF+20%-20%
6A
25Vdc
300M ohm
-55°C to +85°C
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
Insertion Loss (dB)
40
60
80
NFM41PC204F1H3
NFM41PC155B1E3
100
1
10
100
Frequency (MHz)
1000
3000
Block Type EMIFILr
Chip Common Mode Choke Coil
20
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
118
NFM Series
Power Lines Type Chip EMIFILr
NFM55P
NFM55P
Series (2220 Size)
50V/6A/1.5microF, large capacitance chip 3-terminal capacitor.
■ Equivalent Circuit
2.2±0.3
■ Dimensions
Chip Ferrite Bead
*Please refer to the products which are designed for both power lines and signal lines.
(1) Input
1.7+0.3
–0.2
4.7+0.5
–0.3
5.7±0.3
5.0±0.3
Output (3)
No polarity.
GND
(2)
(2)
■ Packaging
(3)
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
500
B
Bulk(Bag)
100
: Electrode
(2)
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM55PC155F1H4p
1.5µF+80%-20%
6A
50Vdc
100M ohm
-55°C to +85°C
Power Lines Type
Chip EMIFILr
(1)
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFM55PC155F1H4
40
60
Chip Common Mode Choke Coil
Insertion Loss (dB)
20
80
1
10
Frequency (MHz)
100
1000
3000
Block Type EMIFILr
100
0.1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
119
NFM Series
Signal Lines Type Chip EMIFILr
NFM18C
NFM18C
Series (0603 Size)
Chip Ferrite Bead
0603 size general 3-terminal capacitor.
■ Dimensions
0.25±0.1
■ Equivalent Circuit
0.4±0.1
0.8±0.1
Output (3)
0.6±0.1
(1) Input
No polarity.
GND
(2)
0.2 min.
1.6±0.1
(2)
(3)
0.8±0.1
(1)
■ Packaging
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
(2) 0.2±0.1
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM18CC220U1C3p
22pF+20%-20%
400mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC470U1C3p
47pF+20%-20%
400mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC101R1C3p
100pF+20%-20%
500mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC221R1C3p
220pF+20%-20%
500mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC471R1C3p
470pF+20%-20%
500mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC102R1C3p
1000pF+20%-20%
600mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC222R1C3p
2200pF+20%-20%
700mA
16Vdc
1000M ohm
-55°C to +125°C
NFM18CC223R1C3p
22000pF+20%-20%
1000mA
16Vdc
1000M ohm
-55°C to +125°C
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
20
Insertion Loss (dB)
Chip Common Mode Choke Coil
Chip EMIFILr
Signal Lines Type
(in mm)
NFM18CC223R1C3
NFM18CC222R1C3
NFM18CC102R1C3
NFM18CC471R1C3
40
NFM18CC221R1C3
NFM18CC101R1C3
NFM18CC470U1C3
60
NFM18CC220U1C3
1
10
Frequency (MHz)
100
1000 2000
Block Type EMIFILr
80
0.1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
120
NFM Series
Signal Lines Type Chip EMIFILr
NFM21C
NFM21C
Series (0805 Size)
■ Dimensions
Chip Ferrite Bead
0805 size general 3-terminal capacitor.
■ Equivalent Circuit
0.3±0.2
Output (3)
0.85±0.1
(1) Input
No polarity.
GND
0.6±0.2
(2)
2.0±0.2
1.25±0.1
(2)
■ Packaging
(3)
0.2+0.2
–0.1
(2)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
500
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM21CC220U1H3p
22pF+20%-20%
700mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC470U1H3p
47pF+20%-20%
700mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC101U1H3p
100pF+20%-20%
700mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC221R1H3p
220pF+20%-20%
700mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC471R1H3p
470pF+20%-20%
1000mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC102R1H3p
1000pF+20%-20%
1000mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC222R1H3p
2200pF+20%-20%
1000mA
50Vdc
1000M ohm
-55°C to +125°C
NFM21CC223R1H3p
22000pF+20%-20%
2000mA
50Vdc
1000M ohm
-55°C to +125°C
Chip Common Mode Choke Coil
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
Insertion Loss (dB)
20
NFM21CC220U1H3
40
NFM21CC470U1H3
NFM21CC101U1H3
60
NFM21CC221R1H3
NFM21CC471R1H3
80
Signal Lines Type
Chip EMIFILr
(1)
NFM21CC223R1H3
NFM21CC222R1H3
NFM21CC102R1H3
100
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
121
NFM Series
Signal Lines Type Chip EMIFILr
NFM3DC
NFM3DC
Series (1205 Size)
Chip Ferrite Bead
1205 size general 3-terminal capacitor.
■ Equivalent Circuit
0.7±0.2
■ Dimensions
(1) Input
Output (3)
1.1±0.3
3.2±0.2
No polarity.
1.25±0.2
GND
(2)
(2)
(3)
0.25±0.2
(1)
■ Packaging
(2)
0.3±0.2
: Electrode
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
500
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM3DCC220U1H3p
22pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC470U1H3p
47pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC101U1H3p
100pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC221R1H3p
220pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC471R1H3p
470pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC102R1H3p
1000pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC222R1H3p
2200pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
NFM3DCC223R1H3p
22000pF+50%-20%
300mA
50Vdc
1000M ohm
-55°C to +125°C
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
20
Insertion Loss (dB)
Chip Common Mode Choke Coil
Chip EMIFILr
Signal Lines Type
(in mm)
NFM3DCC223R1H3
40
NFM3DCC222R1H3
NFM3DCC102R1H3
NFM3DCC471R1H3
60
NFM3DCC221R1H3
NFM3DCC101UH3
NFM3DCC470U1H3
80
NFM3DCC220U1H3
100
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
122
NFM Series
Signal Lines Type Chip EMIFILr
NFM41C
NFM41C
Series (1806 Size)
■ Equivalent Circuit
1.0±0.2
■ Dimensions
Chip Ferrite Bead
1806 size general 3-terminal capacitor.
(1) Input
Output (3)
1.5±0.3
No polarity.
4.5±0.3
1.6±0.3
GND
(2)
(2)
(2)
0.4±0.3
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
500
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFM41CC220U2A3p
22pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC470U2A3p
47pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC101U2A3p
100pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC221U2A3p
220pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC471R2A3p
470pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC102R2A3p
1000pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC222R2A3p
2200pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
NFM41CC223R2A3p
22000pF+50%-20%
300mA
100Vdc
10000M ohm
-55°C to +125°C
Chip Common Mode Choke Coil
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
Insertion Loss (dB)
20
NFM41CC223R2A3
40
NFM41CC222R2A3
NFM41CC102R2A3
60
Signal Lines Type
Chip EMIFILr
■ Packaging
(3)
0.3+0.3
–0.2
(1)
NFM41CC471R2A3
NFM41CC221U2A3
NFM41CC101U2A3
80
NFM41CC470U2A3
NFM41CC220U2A3
100
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
123
NFA Series
Signal Lines Type Chip EMIFILr
NFA31C
NFA31C
Series (1206 Size)
Chip Ferrite Bead
4-lines chip 3-terminal capacitor array, 1206 size.
■ Dimensions
■ Equivalent Circuit
Input
3.2±0.2
(7)
0.8±0.1
(9)
(10)
0.8±0.2
GND (1)
(2) GND
(3)
(8)
(9)
(4)
(5)
(6)
1.1±0.5
0.4±0.2
(7)
(8)
1.6±0.2
Output
No polarity.
(10)
■ Packaging
(2)
(1)
(4)
(5)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
100
(6)
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Capacitance
Rated Current
Rated Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFA31CC220S1E4p
22pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC470S1E4p
47pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC101S1E4p
100pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC221S1E4p
220pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC471R1E4p
470pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC102R1E4p
1000pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC222R1E4p
2200pF+20%-20%
200mA
25Vdc
1000M ohm
-40°C to +85°C
NFA31CC223R1C4p
22000pF+20%-20%
200mA
16Vdc
1000M ohm
-40°C to +85°C
Number of Circuit: 4
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFA31CC470S1E4
NFA31CC220S1E4
20
Insertion Loss (dB)
Chip Common Mode Choke Coil
Chip EMIFILr
Signal Lines Type
(3)
0.05 min.
0.05 min.
NFA31CC223R1C4
40
NFA31CC222R1E4
NFA31CC102R1E4
60
NFA31CC471R1E4
NFA31CC221S1E4
NFA31CC101S1E4
80
100
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
124
NFL Series
Signal Lines Type Chip EMIFILr
NFL18ST
NFL18ST
Series (0603 Size)
■ Dimensions
NFL18ST_H
Chip Ferrite Bead
T-type LC filter. Reduce waveform distortion of high speed signal.
■ Equivalent Circuit
1.6±0.1
(Top View)
(2)
(3)
(2)
(Side View)
0.3±0.1
0.2±0.1
0.8±0.1
(1)
Input
(1)
Output
(3)
Folarity Marking
GND
(2)
0.2±0.1
0.6±0.1
No Polarity.
■ Packaging
0.2 min.
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
1000
(Bottom View)
: Electrode
0.15±0.1
■ Dimensions
NFL18ST_X
0.2 min.
Signal Lines Type
Chip EMIFILr
(in mm)
■ Equivalent Circuit
0.2 min.
Input
(1)
(1)
Output
(3)
0.8±0.1
(2)
(3)
GND
(2)
(2)
0.25±0.1
0.25±0.1
0.8±0.1
0.4±0.1
No Polarity.
1.6±0.1
: Electrode
(in mm)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
1000
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Nominal
Cut-off
Frequency
Part Number
Capacitance
Inductance
Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated
(Cut-off
Frequency) (200MHz) (min.) (300MHz) (min.) (400MHz) (min.) Current
Rated
Voltage
NFL18ST506H1A3p
50MHz 110pF (Typ.) 350nH (Typ.) 6dB max.
30dB
30dB
30dB
75mA 10Vdc
NFL18ST706H1A3p
70MHz 70pF (Typ.) 230nH (Typ.) 6dB max.
-
30dB
30dB
75mA 10Vdc
NFL18ST107H1A3p
100MHz 50pF (Typ.) 150nH (Typ.) 6dB max.
-
-
30dB
75mA 10Vdc
Insulation Resistance (min.): 1000M ohm Withstand Voltage: 30Vdc Operating Temperature Range: -55°C to +125°C Number of Circuits: 1
Chip Common Mode Choke Coil
■ Packaging
■ Insertion Loss Characteristics (Main Items)
NFL18ST_H Series
Block Type EMIFILr
0
20
Insertion Loss (dB)
NFL18ST506H1A3
NFL18ST706H1A3
40
NFL18ST107H1A3
60
80
100
1
10
100
Frequency (MHz)
1000
10000
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
125
NFL Series
Signal Lines Type Chip EMIFILr
NFL18ST Series (0603 Size)
NFL18ST
Chip Ferrite Bead
■ Rated Value (p: packaging code)
Nominal
Capacitance
Cut-off Frequency
Part Number
Inductance
Rated Current Rated Voltage
Insulation
Resistance
(min.)
Operating
Withstand
Voltage Temperature Range
NFL18ST207X1C3p
200MHz
25pF±20% 110nH±20%
150mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL18ST307X1C3p
300MHz
18pF±20% 62nH±20%
200mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL18ST507X1C3p
500MHz
10pF±20% 43nH±20%
200mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
Number of Circuits: 1
■ Insertion Loss Characteristics (Main Items)
NFL18ST_X Series
(50Ω - 50Ω)
0
NFL18ST507X1C3
Insertion Loss (dB)
Chip EMIFILr
Signal Lines Type
20
NFL18ST307X1C3
NFL18ST207X1C3
40
60
80
10
100
Frequency (MHz)
1000
5000
Block Type EMIFILr
Chip Common Mode Choke Coil
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
126
NFL Series
Signal Lines Type Chip EMIFILr
NFL18SP
NFL18SP
Series (0603 Size)
■ Dimensions
(2)
Chip Ferrite Bead
PI-type LC filter. Reduce waveform distortion of high speed signal.
■ Equivalent Circuit
0.15±0.1
(1) Input
Output (3)
(3)
0.8±0.1
(1)
(1)
(3)
(2)
GND
(2)
1.6±0.1
0.2 min.
No polarity.
0.3±0.1
0.4±0.1
0.3±0.1
0.15±0.1
0.15±0.1
: Electrode
(in mm)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
1000
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Nominal
Capacitance
Cut-off Frequency
Part Number
Inductance
Rated Current Rated Voltage
Insulation
Resistance
(min.)
Operating
Withstand
Voltage Temperature Range
NFL18SP157X1A3p
150MHz
34pF±20% 100nH±20%
100mA
10Vdc
1000M ohm
30Vdc
-55°C to +125°C
NFL18SP207X1A3p
200MHz
24pF±20%
80nH±20%
100mA
10Vdc
1000M ohm
30Vdc
-55°C to +125°C
NFL18SP307X1A3p
300MHz
19pF±20%
60nH±20%
100mA
10Vdc
1000M ohm
30Vdc
-55°C to +125°C
NFL18SP507X1A3p
500MHz
11pF±20%
38nH±20%
100mA
10Vdc
1000M ohm
30Vdc
-55°C to +125°C
Signal Lines Type
Chip EMIFILr
0.6±0.1
■ Packaging
Number of Circuits: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFL18SP157X1A3
Insertion Loss (dB)
Chip Common Mode Choke Coil
NFL18SP207X1A3
20
NFL18SP307X1A3
NFL18SP507X1A3
40
60
80
10
100
Frequency (MHz)
1000 2000
Block Type EMIFILr
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
127
NFL Series
Signal Lines Type Chip EMIFILr
NFL21SP
NFL21SP
Series (0805 Size)
Chip Ferrite Bead
PI-type LC filter. Reduce waveform distortion of high speed signal.
■ Dimensions
0.3±0.2
■ Equivalent Circuit
0.4±0.2
Output (3)
0.85±0.1
(1) Input
0.6±0.2
GND
(2)
2.0±0.2
No polarity.
(1)
1.25±0.1
(2)
(3)
(2)
0.25±0.2
: Electrode
■ Packaging
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
1000
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Part Number
Nominal
Cut-off
Frequency
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
NFL21SP106X1C3p
10MHz
670pF±20% 680nH±20%
100mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP206X1C7p
NFL21SP506X1C3p
20MHz
240pF±20% 700nH±20%
100mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
50MHz
84pF±20%
305nH±20%
150mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP706X1C3p
70MHz
76pF±20%
185nH±20%
150mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP107X1C3p
100MHz
44pF±20%
135nH±20%
200mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP157X1C3p
150MHz
28pF±20%
128nH±20%
200mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP207X1C3p
200MHz
22pF±20%
72nH±20%
250mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP307X1C3p
300MHz
19pF±10%
45nH±10%
300mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP407X1C3p
400MHz
16pF±10%
34nH±10%
300mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
NFL21SP507X1C3p
500MHz
12pF±10%
31nH±10%
300mA
16Vdc
1000M ohm
50Vdc
-55°C to +125°C
Inductance
Withstand
Operating
Voltage Temperature Range
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
20
40
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
60
Block Type EMIFILr
Capacitance
Number of Circuits: 1
Insertion Loss (dB)
Chip Common Mode Choke Coil
Chip EMIFILr
Signal Lines Type
(in mm)
80
1
10
100
Frequency (MHz)
1000 2000
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
128
NFA Series
Signal Lines Type Chip EMIFILr
NFA18SL
NFA18SL
Series (0603 Size)
■ Dimensions
1.6±0.1
■ Equivalent Circuit
(Top View)
(4)
(5)
(6)
(1) GND
GND (2)
(7)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
0.2±0.1
Polarity Marking
0.25±0.1
■ Dimensions
(3)
(4)
(5)
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
1000
(3)
GND (2)
(7)
(8) (9) (10)
(5)
(6)
GND (1)
(2) GND
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(7)
0.4±0.05
(8)
(9)
(10)
0.25±0.1
0.6+0.05
–0.1
(Side View)
(4)
(6)
0.2±0.1
Polarity Marking
■ Packaging
0.2±0.1
(Bottom View)
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
1000
: Electrode
(in mm)
■ Dimensions
■ Equivalent Circuit
1.6±0.1
(Top View)
(3)
(4)
(5)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(6)
GND (1)
(2) GND
(7)
(8)
0.8±0.1
NFA18SL 307/407/487 V1A45
Packaging
■ Equivalent Circuit
(1) GND
0.15±0.1
(2) GND
Code
1.6±0.1
(Top View)
0.8±0.1
NFA18SL227V1A45
GND (1)
■ Packaging
Part Number
T
NFA18SL357V1A45 0.5±0.1
NFA18SL137V1A45
NFA18SL187V1A45
+0.05
0.6–0.1
NFA18SL207V1A45
NFA18SL506X1A45
(in mm)
(Bottom View)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(6)
(7)
(8)
(9)
(10)
*Please change IN/OUT according to the circuit condition.
T
0.2±0.1
(5)
: Electrode
0.4±0.05
(Side View)
(4)
(3)
(4)
(5)
Chip Common Mode Choke Coil
0.15±0.1
(8) (9) (10)
(3)
Signal Lines Type
Chip EMIFILr
(3)
0.8±0.1
NFA18SL 137/187/207/357 V1A45
NFA18SL506X1A45
Chip Ferrite Bead
LC filter 4-lines array for mobile phones.
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(6)
GND (1)
(2) GND
(9) (10)
Polarity Marking
0.5±0.1
(Side View)
0.2±0.1 0.4±0.05
(7)
(8)
(9)
(10)
*Please change IN/OUT according to the circuit condition.
■ Packaging
0.25±0.1
0.15±0.1
(Bottom View)
0.20±0.1
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
1000
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
Part Number
Nominal Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Rated Rated
Cut-off
(Cut-off
(470MHz)
(800MHz)
(900MHz)
(2000MHz)
Current Voltage
Frequency Frequency)
(min.)
(min.)
(min.)
(min.)
Insulation
Resistance
(min.)
Withstand
Voltage
NFA18SL137V1A45p
130MHz
6dBmax
25dB
-
25dB
-
50mA 10Vdc 1000M ohm 30Vdc
NFA18SL187V1A45p
180MHz
6dBmax
20dB
-
20dB
-
50mA 10Vdc 1000M ohm 30Vdc
NFA18SL207V1A45p
200MHz
6dBmax
15dB
-
15dB
-
50mA 10Vdc 1000M ohm 30Vdc
NFA18SL227V1A45p
220MHz
6dBmax
-
-
30dB
30dB
25mA 10Vdc 1000M ohm 30Vdc
NFA18SL307V1A45p
300MHz
6dBmax
-
20dB
20dB
-
100mA 10Vdc 1000M ohm 30Vdc
NFA18SL357V1A45p
350MHz
6dBmax
-
-
15dB
13dB
35mA 10Vdc 1000M ohm 30Vdc
NFA18SL407V1A45p
400MHz
6dBmax
-
18dB
18dB
-
100mA 10Vdc 1000M ohm 30Vdc
NFA18SL487V1A45p
480MHz
6dBmax
-
15dB
15dB
-
100mA 10Vdc 1000M ohm 30Vdc
Operating Temperature Range: -40°C to +85°C (NFA18SL 137/187/207/227/357 V1A45), -55°C to +125°C (NFA18SL 307/407/487 V1A45) Number of Circuits: 4
Block Type EMIFILr
■ Rated Value (p: packaging code)
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
129
NFA Series
Signal Lines Type Chip EMIFILr
NFA18SL Series (0603 Size)
NFA18SL
NFA18SL 137/187/207 V1A45
NFA18SL227V1A45
(50Ω - 50Ω)
0
0
NFA18SL207V1A45
NFA18SL137V1A45
20
20
NFA18SL187V1A45
Insertion Loss (dB)
Insertion Loss (dB)
Chip Ferrite Bead
■ Insertion Loss Characteristics (Main Items)
40
80
10
100
Frequency (MHz)
1000
80
10
3000
NFA18SL 307/407/487 V1A45
100
Frequency (MHz)
1000
3000
NFA18SL357V1A45
(50Ω - 50Ω)
0
0
NFA18SL307V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SL357V1A45
20
Insertion Loss (dB)
20
Insertion Loss (dB)
Chip EMIFILr
Signal Lines Type
NFA18SL227V1A45
60
60
40
40
60
60
80
10
Chip Common Mode Choke Coil
40
100
Frequency (MHz)
1000
3000
80
10
100
1000
10000
Frequency (MHz)
■ Rated Value (p: packaging code)
Part Number
Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
at 500MHz
(min.)
Insertion Loss
at 1000MHz
(min.)
Rated
Voltage
Rated
Current
Insulation
Resistance
(min.)
Withstand
Voltage
NFA18SL506X1A45p
50MHz
6dBmax
30dB
25dB
10Vdc
25mA
1000M ohm
30Vdc
Operating Temperature Range: -40°C to +85°C Number of Circuits: 4
■ Insertion Loss Characteristics (Main Items)
NFA18SL_X
(50Ω - 50Ω)
0
NFA18SL506X1A45
Insertion Loss (dB)
Block Type EMIFILr
20
40
60
80
10
100
Frequency (MHz)
1000
3000
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
130
NFA Series
Signal Lines Type Chip EMIFILr
NFA18SD
NFA18SD
Series (0603 Size)
■ Dimensions
Chip Ferrite Bead
For differential signal I/F of LCD or camera in mobile phones.
■ Equivalent Circuit
1.6±0.1
(4)
(5)
(6)
(1) GND
GND (2)
(7)
0.15±0.1
(3)
(8) (9) (10)
0.2±0.1
Polarity Marking
0.4±0.05
(5)
(6)
GND (1)
(2) GND
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(7)
0.25±0.1
0.6+0.05
–0.1
(Side View)
(4)
(9)
(10)
■ Packaging
0.2±0.1
(Bottom View)
(8)
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
1000
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Nominal
Insertion Loss
Insertion Loss Insertion Loss Insertion Loss
Insertion Loss
Insulation Resistance Withstand
Rated Voltage Rated Current
Cut-off
(min.)
Voltage
Frequency (Cut-off Frequency) (500MHz) (min.) (900MHz) (min.) (1500MHz) (min.) (2000MHz) (min.)
Part Number
NFA18SD187X1A45p
180MHz
6dBmax
15dB
20dB
20dB
20dB
10Vdc
25mA
1000M ohm
30Vdc
NFA18SD207X1A45p
200MHz
6dBmax
13dB
20dB
20dB
20dB
10Vdc
25mA
1000M ohm
30Vdc
Signal Lines Type
Chip EMIFILr
(3)
0.8±0.1
(Top View)
Operating Temperature Range: -40°C to +85°C Number of Circuits: 4
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
10
NFA18SD187X1A45
20
Chip Common Mode Choke Coil
Insertion Loss (dB)
NFA18SD207X1A45
30
40
100
Frequency (MHz)
1000
3000
Block Type EMIFILr
50
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
131
NFA Series
Signal Lines Type Chip EMIFILr
NFA21SL
NFA21SL
Series (0805 Size)
Chip Ferrite Bead
L-type LC filter 4-lines array for mobile phones.
■ Dimensions
■ Equivalent Circuit
Polarity
Marking
2.0±0.1
(3) (4) (5) (6)
GND (2)
0.25±0.1
(1) GND
0.2±0.15
(7) (8) (9) (10)
0.2±0.15
0.15 min.
(4)
(5)
(6)
(1) GND
GND (2)
(3)(4)(5)(6): IN (OUT)
(7)(8)(9)(10): OUT (IN)
(7)
0.25±0.1
(8)
(9)
(10)
■ Packaging
T
0.25±0.1
(3)
1.25±0.1
(Top View)
0.5±0.05
Part Number
T
NFA21SLpppX1A45p
0.5±0.1
NFA21SLpppV1A45p
NFA21SLpppX1A48p
0.85±0.1
NFA21SLpppV1A48p
(Bottom View)
Chip EMIFILr
Signal Lines Type
: Electrode
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
1000
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Insulation
Resistance
(min.)
Withstand
Voltage
100mA
1000M ohm
30Vdc
10Vdc
100mA
1000M ohm
30Vdc
10Vdc
100mA
1000M ohm
30Vdc
25dB
10Vdc
100mA
1000M ohm
30Vdc
20dB
10Vdc
100mA
1000M ohm
30Vdc
20dB
10Vdc
100mA
1000M ohm
30Vdc
Part Number
Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
at 800MHz
(min.)
Insertion Loss
at 900MHz
(min.)
NFA21SL287V1A45p
280MHz
6dBmax
25dB
25dB
10Vdc
NFA21SL317V1A45p
310MHz
6dBmax
20dB
20dB
NFA21SL337V1A45p
330MHz
6dBmax
15dB
15dB
NFA21SL287V1A48p
280MHz
6dBmax
25dB
NFA21SL317V1A48p
310MHz
6dBmax
20dB
NFA21SL337V1A48p
330MHz
6dBmax
20dB
Rated Voltage Rated Current
Operating Temperature Range: -55°C to +125°C Number of Circuits: 4
NFA21SL_V1A45
NFA21SL_V1A48
(50Ω - 50Ω)
0
(50Ω - 50Ω)
NFA21SL337V1A48
0
NFA21SL287V1A45
NFA21SL317V1A45
NFA21SL337V1A45
20
NFA21SL287V1A48
20
Insertion Loss (dB)
NFA21SL317V1A48
Insertion Loss (dB)
Chip Common Mode Choke Coil
■ Insertion Loss Characteristics (Main Items)
40
40
60
60
80
10
100
Frequency (MHz)
1000
3000
80
10
100
Frequency (MHz)
1000
3000
Block Type EMIFILr
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
132
NFA Series
Signal Lines Type Chip EMIFILr
NFA21SL Series (0805 Size)
NFA21SL
Part Number
Nominal
Cut-off Frequency
Insertion Loss
(Cut-off Frequency)
Insertion Loss
at 500MHz
(min.)
Insertion Loss
at 800MHz
(min.)
Insertion Loss
at 1000MHz
(min.)
Rated
Voltage
Rated
Current
Insulation
Resistance
(min.)
Withstand
Voltage
NFA21SL207X1A45p
200MHz
2 to 7
13dB
25dB
25dB
10Vdc
100mA
1000M ohm
30Vdc
NFA21SL307X1A45p
300MHz
2 to 7
7dB
20dB
25dB
10Vdc
100mA
1000M ohm
30Vdc
NFA21SL506X1A48p
50MHz
0 to 6
30dB
-
20dB
10Vdc
20mA
1000M ohm
30Vdc
NFA21SL806X1A48p
80MHz
2 to 7
25dB
-
25dB
10Vdc
20mA
1000M ohm
30Vdc
NFA21SL207X1A48p
200MHz
2 to 7
13dB
25dB
25dB
10Vdc
100mA
1000M ohm
30Vdc
NFA21SL307X1A48p
300MHz
2 to 7
7dB
20dB
25dB
10Vdc
100mA
1000M ohm
30Vdc
Chip Ferrite Bead
■ Rated Value (p: packaging code)
Operating Temperature Range: -55°C to +125°C Number of Circuits: 4
■ Insertion Loss Characteristics (Main Items)
NFA21SL_X
(50Ω - 50Ω)
0
NFA21SL806X1A48
NFA21SL207X1A45(48)
NFA21SL307X1A45(48)
20
Insertion Loss (dB)
Signal Lines Type
Chip EMIFILr
NFA21SL506X1A48
40
60
80
10
100
Frequency (MHz)
1000
3000
Block Type EMIFILr
Chip Common Mode Choke Coil
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
133
NFW Series
Signal Lines Type Chip EMIFILr
NFW31S
NFW31S
Series (1206 Size)
Chip Ferrite Bead
Wire-wound PI-type LC filter.
■ Dimensions
■ Equivalent Circuit
2.3±0.2
Output (3)
1.8±0.2
(1) Input
GND
(2)
1.6±0.2
3.2±0.3
No polarity.
(1)
(2)
(3)
■ Packaging
(1): Input electrode
(2): Ground electrode
(3): Output electrode
* No polarity.
0.7±0.3
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
2000
K
330mm Reel Embossed Tape
7500
: Electrode
0.7±0.3
0.65±0.2
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Nominal
Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss Insertion Loss
Cut-off Frequency at 10MHz at 20MHz at 50MHz at 100MHz at 150MHz at 200MHz at 300MHz at 400MHz at 500MHz at 1000MHz
Part Number
NFW31SP106X1E4p
10MHz
6dBmax. 5dBmin. 25dBmin. 25dBmin.
-
25dBmin.
-
-
30dBmin. 30dBmin.
NFW31SP206X1E4p
20MHz
-
NFW31SP506X1E4p
50MHz
-
-
-
25dBmin.
-
-
30dBmin. 30dBmin.
-
30dBmin.
-
-
30dBmin. 30dBmin.
NFW31SP107X1E4p
100MHz
-
-
-
NFW31SP157X1E4p
150MHz
-
-
-
6dBmax.
-
5dBmin.
-
-
20dBmin. 30dBmin.
-
6dBmax.
-
NFW31SP207X1E4p
200MHz
-
-
-
-
-
6dBmax.
-
NFW31SP307X1E4p
300MHz
-
NFW31SP407X1E4p
400MHz
-
-
-
-
-
-
-
-
-
-
-
NFW31SP507X1E4p
500MHz
-
-
-
-
-
-
6dBmax. 5dBmin. 25dBmin.
6dBmax. 10dBmin.
10dBmin. 20dBmin 30dBmin. 30dBmin.
-
10dBmin. 30dBmin.
6dBmax.
-
5dBmin. 15dBmin.
-
6dBmax.
-
-
-
10dBmin.
6dBmax. 10dBmin.
Rated Current: 200mA Rated Voltage: 25Vdc Operating Temperature Range: -40°C to +85°C Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
NFW31SP157X1E4
NFW31SP207X1E4
20
Insertion Loss (dB)
Chip Common Mode Choke Coil
Chip EMIFILr
Signal Lines Type
(in mm)
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
40
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
60
NFW31SP107X1E4
80
Block Type EMIFILr
1
10
100
Frequency (MHz)
1000 2000
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
134
NFW31 Series
Measuring Circuit
Example of EMI Suppression
in an Actual Circuit
EMI
Suppression Filter
74ALS04
Chip Ferrite Bead
EMI
Suppression
Effect
74ALS00
Measuring
Point
10MHz
Type of Filter
(
)
Signal Wave Form 20ns/div
1V/div / EMI Suppression Effect / Description
60
40
20
0
)
500
Noise Spectrum
(10:1 Active Probe)
NFW31S Series
(Cut-off frequency 50MHz)
Noise Level (dBµV/m)
100
80
NFW31S's steep attenuation
characteristic means excellent EMI
suppression without waveform
cornering.
Level before
filter mounting
60
40
20
0
400
100
200
300
Frequency (MHz)
500
Conventional Chip
Solid Type EMI Filter
(NFM41CC 470pF)
Noise Level (dBµV/m)
100
80
40
20
L
C
L: Chip Inductor
C: Chip Capacitor
(270pF)
100
Noise Level (dBµV/m)
L
3-terminal capacitors suppress
signal frequencies as EMI
frequencies so the signal waveform
is distorted.
Level before
filter mounting
60
0
Filter Combined
with Conventional LCs
Chip Common Mode Choke Coil
(
Signal Waveform 20ns/div
1V/div
400
100
200
300
Frequency (MHz)
80
400
100
200
300
Frequency (MHz)
500
Level before
filter mounting
60
40
20
0
400
100
200
300
Frequency (MHz)
500
Block Type EMIFILr
Signal Waveform
and Noise Spectrum
before Filter Mounting
80
Signal Lines Type
Chip EMIFILr
Noise Level (dBµV/m)
100
Combinations of inductors and
capacitors can yield a steep
attenuation characteristic, but they
require a great deal more mounting
space.
Moreover, at high frequencies the
EMI suppression is less than that
obtained by NFW31S.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
135
NFR Series
Signal Lines Type Chip EMIFILr
NFR21G
NFR21G
Series (0805 Size)
Chip Ferrite Bead
3-terminal RC filter, damp the noise current and return back to ground.
■ Dimensions
■ Equivalent Circuit
(Top View)
(1) Input
0.5±0.2
1.0 max.
(2)
1.0±0.35
0.95±0.35
2.0±0.2
1.25±0.2
No polarity
■ Packaging
(3)
0.3+0.2
–0.25
(1)
Code
Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
4000
B
Bulk(Bag)
500
0.3+0.2
–0.25
(2)
: Electrode
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
■ Rated Value (p: packaging code)
Insulation
Resistance
(min.)
Operating
Temperature Range
50Vdc
1000M ohm
-40°C to +85°C
35mA
50Vdc
1000M ohm
-40°C to +85°C
50mA
50Vdc
1000M ohm
-40°C to +85°C
47ohm±30%
35mA
50Vdc
1000M ohm
-40°C to +85°C
68ohm±30%
30mA
50Vdc
1000M ohm
-40°C to +85°C
47pF±20%
100ohm±30%
25mA
50Vdc
1000M ohm
-40°C to +85°C
NFR21GD1012202p
100pF±20%
22ohm±30%
50mA
50Vdc
1000M ohm
-40°C to +85°C
NFR21GD1014702p
100pF±20%
47ohm±30%
35mA
50Vdc
1000M ohm
-40°C to +85°C
NFR21GD1016802p
100pF±20%
68ohm±30%
30mA
50Vdc
1000M ohm
-40°C to +85°C
NFR21GD1011012p
100pF±20%
100ohm±30%
25mA
50Vdc
1000M ohm
-40°C to +85°C
Part Number
Capacitance
DC Resistance
Rated Current Rated Voltage
NFR21GD1002202p
10pF±20%
22ohm±30%
50mA
NFR21GD1004702p
10pF±20%
47ohm±30%
NFR21GD4702202p
47pF±20%
22ohm±30%
NFR21GD4704702p
47pF±20%
NFR21GD4706802p
47pF±20%
NFR21GD4701012p
Number of Circuit: 1
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
(50Ω - 50Ω)
0
NFR21GD4701012
10
10
NFR21GD1002202
NFR21GD1004702
Insertion Loss (dB)
Insertion Loss (dB)
Chip EMIFILr
Signal Lines Type
GND
(2)
(Bottom View)
Chip Common Mode Choke Coil
Output (3)
NFR21GD4702202
20
NFR21GD4704702
NFR21GD4706802
NFR21GD1012202
30
NFR21GD1014702
20
NFR21GD1011012
30
NFR21GD1016802
40
Block Type EMIFILr
40
50
50
1
10
100
Frequency (MHz)
1000
1
10
100
1000
Frequency (MHz)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
136
NFA Series
Signal Lines Type Chip EMIFILr
NFA31G
NFA31G
Series (1206 Size)
■ Dimensions
(8)
■ Equivalent Circuit
(9)
Input
(10)
(7)
(1)
(8)
(9)
(10)
(2)
(2)GND
(1)GND
(3)
(4)
(6)
0.8±0.1
(3)
1.1±0.5
3.2±0.2
(5)
(6)
■ Packaging
1.6±0.2
(Bottom View)
Code
Packaging
Minimum
Quantity
D
180mm Reel Paper Tape
4000
B
Bulk(Bag)
100
: Electrode
0.05 min.
0.05 min.
(4)
Output
No polarity.
0.8±0.2
0.4±0.15
(5)
(in mm)
Refer to pages from p.139 to p.144 for mounting information.
Part Number
Capacitance
DC Resistance
Rated
Current
Rated
Voltage
Insulation
Resistance
(min.)
Operating
Temperature Range
NFA31GD1006R84p
10pF±20%
6.8ohm±40%
50mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD1004704p
10pF±20%
47ohm±30%
20mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD1001014p
10pF±20%
100ohm±30%
15mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD4706R84p
47pF±20%
6.8ohm±40%
50mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD4703304p
47pF±20%
33ohm±30%
20mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD4704704p
47pF±20%
47ohm±30%
20mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD4701014p
47pF±20%
100ohm±30%
15mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD1016R84p
100pF±20%
6.8ohm±40%
50mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD1014704p
100pF±20%
47ohm±30%
20mA
6Vdc
1000M ohm
-40°C to +85°C
NFA31GD1011014p
100pF±20%
100ohm±30%
15mA
6Vdc
1000M ohm
-40°C to +85°C
Chip Common Mode Choke Coil
■ Rated Value (p: packaging code)
Number of Circuit: 4
■ Insertion Loss Characteristics (Main Items)
(50Ω - 50Ω)
0
10
(50Ω - 50Ω)
0
10
NFA31GD1006R84
Insertion Loss (dB)
20
NFA31GD1016R84
30
40
NFA31GD4704704
20
NFA31GD1014704
30
40
50
50
1
10
100
Frequency (MHz)
0
1000 2000
1
(50Ω - 50Ω)
10
100
Frequency (MHz)
0
1000 2000
(50Ω - 50Ω)
10
10
NFA31GD1001014
NFA31GD4703304
Insertion Loss (dB)
Insertion Loss (dB)
Block Type EMIFILr
Insertion Loss (dB)
NFA31GD1004704
NFA31GD4706R84
Signal Lines Type
Chip EMIFILr
(7)
(Top View)
Chip Ferrite Bead
3-terminal RC filter array.
NFA31GD4701014
20
NFA31GD1011014
30
20
30
40
40
50
50
1
10
100
Frequency (MHz)
1000 2000
1
10
100
Frequency (MHz)
1000 2000
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
137
Chip EMIFILr
!Caution/Notice
Chip Ferrite Bead
!Caution
● Soldering and Mounting
● Rating
Do not use products beyond the rated current and rated
voltage as this may create excessive heat and
deteriorate the insulation resistance.
• Self-heating
Please provide special attention when mounting chip
EMIFILr NFM_P series in close proximity to other
products that radiate heat.
The heat generated by other products may deteriorate
the insulation resistance and cause excessive heat in
this component.
Notice
● Handling
<Operating Environment>
Do not use products in a chemical atmosphere such as
chlorine gas, acid or sulfide gas.
Do not use products in the environment close to the
organic solvent.
<Storage and Handling Requirements>
1. Storage Period
NFM55P series should be used within 6 months, the
other series should be used within 12 months.
Solderability should be checked if this period is
exceeded.
2. Storage Conditions
(1) Storage temperature: -10 to +40˚C
Relative humidity: 15 to 85%
Avoid sudden changes in temperature and humidity.
(2) Do not store products in a chemical atmosphere
such as chlorine gas, acid or sulfide gas.
1. Resin Coating
Using resin for coating/molding products may affect
the products performance.
So please pay careful attention in selecting resin.
Prior to use, please make the reliability evaluation with
the product mounted in your application set.
2. Caution for Use (NFW Series)
When you hold products with a tweezer, please hold
by the sides. Sharp materials, such as a pair of
tweezers or other material such as bristles of cleaning
brush, should not touch the winding portion of this
product to prevent breaking the wire. Mechanical
shock should not be applied to the products mounted
on the board to prevent breaking the core.
3. Handling of a Substrate
After mounting products on a substrate, do not apply
any stress to the product caused by bending or
twisting to the substrate when cropping the substrate,
inserting and removing a connector from the substrate
or tightening screw to the substrate.
Excessive mechanical stress may cause cracking in
the Product.
Chip Common Mode Choke Coil
!Caution/
Notice
Chip EMIFILr
● Storage and Operating Conditions
● Notice (Soldering and Mounting)
Block Type EMIFILr
1. Cleaning
Failure and degradation of a product are caused by
the cleaning method. When you clean in conditions
that are not in mounting information, please contact
Murata engineering.
2. Soldering
Reliability decreases with improper soldering methods.
Please solder by the standard soldering conditions
shown in mounting information.
3. Other
Noise suppression levels resulting from Murata's EMI
suppression filters EMIFILr may vary, depending on
the circuits and ICs used, type of noise, mounting
pattern, mounting location, and other operating
conditions. Be sure to check and confirm in advance
the noise suppression effect of each filter, in actual
circuits, etc. before applying the filter in a commercialpurpose equipment design.
Bending
Twisting
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
138
NFp
Soldering and Mounting
Chip EMIFILr
NFp series suppress noise by conducting the high-frequency noise element to ground. Therefore, to obtain maximum
performance from these filters, the ground pattern should be made as large as possible during the PCB design stage. As
shown below, one side of the PCB is used for chip mounting, and the other is used for grounding.
Small diameter feedthrough holes are then used to connect the grounds on each side of the PCB. This reduces the highfrequency impedance of the grounding and maximizes the filter's performance.
Land Pattern
+ Solder Resist
Land Pattern
Solder Resist
Reflow Soldering
NFM18C/NFM18PC/NFL18ST
(in mm)
NFM18PS
Small diameter thru hole
ø0.2
0.4
0.6
1.0
2.2
0.8
1.2
2.0
0.05
NFL18SP
Chip EMIFILr
0.4
0.6
1.2
0.4 0.1
1.2
1.5
Small diameter thru hole
ø0.2-ø0.3
1.5
NFM55P
Small diameter thru hole
ø1.0-ø2.0
Small diameter thru hole
ø0.2-ø0.3
0.4
Chip
3.5
5.0
6.4
6.5
1.2
0.8
0.8
Soldering
and Mounting
NFM18
NFL18
NFM55P
1.0
1.5
2.0
2.0
4.7
6.7
Chip Common Mode Choke Coil
0.4
Please contact us if using
thinner land pad than 18µm.
• NFp18, NFM55P are specially adapted for reflow soldering.
o Reflow Soldering
Chip mounting side
o Flow Soldering
Chip mounting side
NFM21C/NFR21G
NFM21PC/NFL21S
NFM3DC/NFM3DP/
NFM31P
NFM41C/NFM41P
Small diameter thru hole ø0.4
Small diameter
thru hole ø0.4
Small diameter thru hole ø0.4
0.6
e
f
g
0.6
e
f
g
0.6
e
f
g
NFM21C
NFM21P
NFM3D
NFM31P
NFM41
NFR21G
NFL21S
Chip Ferrite Bead
1. Standard Land Pattern Dimensions
NFM21P/NFL21S
a
b
0.6
-
c
d
e
Size (mm)
Part Number
f
a
g
1.4 2.6 0.8 1.9 2.3
NFM3DC
NFM3DP
NFM3DC/NFM3DP
1.0 1.4 2.5 4.4 1.0 2.0 2.4
NFM31P
NFM31P
1.0 1.4 2.5 4.4 1.2 2.6 3.0
NFM41C
NFM41C/NFM41P
1.5 2.0 3.5 6.0 1.2 2.6 3.0
NFM41P
Block Type EMIFILr
Size (mm)
Part Number
NFM21C/NFR21G
a
b
c
d
a
b
c
d
a
c
d
b
c
d
e
f
g
1.0 1.4 2.5 4.4 1.0 2.0 2.4
1.0 1.4 2.5 4.4 1.2 2.6 3.0
1.5 2.0 3.5 6.0 1.2 2.6 3.0
• NFp21 is specially adapted for reflow soldering.
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
139
NFp Chip EMIFILr
Soldering and Mounting
Land Pattern
Solder Resist
NFA18S
Small diameter thru hole ø0.2
NFA31G
NFA31C
NFW31S
NFE31P
o Reflow and Flow NFW31S
o Reflow Soldering NFE31P
ø0.4
Small diameter thru hole ø0.4
0.8 Pitch
3.8
0.6
1.2
2.2
4.2
4.2
o Reflow Soldering
Small diameter thru hole ø0.4
1.6
2.6
3.0
Small diameter thru hole ø0.4
o Flow Soldering
0.6
1.2
Chip Common Mode Choke Coil
NFE61P
2.0
4.8
8.8
3.2
3.6
0.3
2.6
3.0
1.0
R0.1 to R0.2 is preferred to obtain
high voltage withstanding
Soldering
and Mounting
1.75
1.5
o Reflow Soldering NFA31G/31C
2.6
0.25
Filled via
ø0.1
0.4
1.0
2.2
Chip EMIFILr
0.5
0.25 0.25
0.35
1.3
2.0
2.35
2.5
0.25 0.25
0.5
1.375
0.225
0.4
0.175
0.05
(in mm)
NFA21S
0.5
Reflow Soldering
0.275
0.175
NFA18S
NFA21S
1.2
0.5
Chip Ferrite Bead
Land Pattern
+ Solder Resist
1.5
3.8
4.8
9.0
o PCB Warping
Block Type EMIFILr
PCB should be designed so that products are not
subjected to the mechanical stress caused by warping
the board.
Products should be located in the sideways direction
(Length: a<b) to the mechanical stress.
a
b
Poor example
Good example
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
140
NFp Chip EMIFILr
Soldering and Mounting
2. Solder Paste Printing and Adhesive Application
Chip Ferrite Bead
When flow soldering the EMI suppression filter, apply the
adhesive in accordance with the following conditions.
If too much adhesive is applied, then it may overflow into
the land or termination areas and yield poor solderability.
In contrast, if insufficient adhesive is applied, or if the
adhesive is not sufficiently hardened, then the chip may
become detached during flow soldering process.
When reflow soldering the chip EMI suppression filter, the
printing must be conducted in accordance with the
following cream solder printing conditions.
If too much solder is applied, the chip will be prone to
damage by mechanical and thermal stress from the PCB
and may crack.
Standard land dimensions should be used for resist and
copper foil patterns.
(in mm)
Adhesive Application
oGuideline of solder paste thickness:
100-150µm: NFM18/21/3D/31P, NFR, NFL
150-200µm: NFM55P
100-200µm: NFM41
0.4
0.6
1.2
0.4
1.0
2.2
1.2
NFL18SP
NFM18C/18PC
NFL18ST
0.4
NFM3D/31P/41 Series
Apply 0.1mg for NFM41C/41 and 0.06mg for
NFM3D/NFM31P of bonding agent at each chip.
Do not cover electrodes.
0.4
1.0
2.0
Soldering
and Mounting
0.6
1.2
0.4
0.8
1.2
2.0
NFM3DC/3DP
Chip Common Mode Choke Coil
0.6
1.4
2.6
1.2
0.8
2.0
0.6
0.6
NFM31P
1.0
2.5
3.9
2.6
0.05
Coating position of
bonding agent
NFM21C/21PC
NFR21G/NFL21S
0.1
NFM18PS
Bonding agent
0.8
1.9
NFM
NFR
NFL
Solder Paste Printing
Chip EMIFILr
Series
1.0
2.5
4.4
NFM41C/41P
3.5
5.0
6.5
Block Type EMIFILr
1.5
3.5
5.5
2.6
1.0
0.6
NFM55P
1.5
4.7
6.7
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
141
NFp Chip EMIFILr
Soldering and Mounting
(in mm)
NFA
Solder Paste Printing
Adhesive Application
oGuideline of solder paste thickness:
100-200µm: NFA31G/31C
100-150µm: NFA18S/21S
NFA31G/31C
0.6
2.6
2.2
1.0
0.4
Chip Ferrite Bead
Series
0.8 Pitch
0.3
NFA21S
1.5
0.5
0.25
0.25
0.25
0.75
1.75
Chip EMIFILr
0.5
NFA18S
0.175
1.375
0.225
0.175
0.4
1.3
2.0
0.6
2.2
4.2
Bonding agent
oGuideline of solder paste thickness:
150-200µm
Coating positon of
bonding agent
Apply 1.0mg of bonding agent at each chip.
1.2
3.2
1.6
2.6
Block Type EMIFILr
0.6
NFE61P
NFW31S Series
Apply 0.2mg of bonding agent at each chip.
2.6
oGuideline of solder paste thickness:
150-200µm
0.6
NFW31S
NFE31P
1.0
Chip Common Mode Choke Coil
Soldering
and Mounting
0.05
1.5
4.8
8.8
Bonding agent
1.5
4.8
9.0
Bonding agent
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
142
NFp Chip EMIFILr
Soldering and Mounting
3. Standard Soldering Conditions
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using NFM series with Sn-Zn based solder, please
contact Murata in advance.
Chip Ferrite Bead
Flux:
o Use Rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
EMI suppression filters.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
For additional mounting methods, please contact Murata.
Chip EMIFILr
(2) Soldering Profile
T3
T2
t2
Heating
T1
Standard Profile
Time (s)
Standard Profile
Pre-heating
Heating
Temp. (T1)
Time. (t1)
Temp. (T2)
Time. (t2)
NFM3DC/3DP/31PC
NFM41C/41P
NFE61P
150°C
60s min.
250°C
4 to 6s
NFW31S
150°C
60s min.
250°C
4 to 6s
Soldering
and Mounting
Pre-heating
t1
Series
Limit Profile
Limit Profile
Cycle
of Flow
Heating
Cycle
of Flow
Temp. (T3)
Time. (t2)
2 times
max.
265±3°C
5s max.
2 times
max.
2 times
max.
265±3°C
5s max.
1 time
Chip Common Mode Choke Coil
Temperature (°C)
oFlow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
Temperature (°C)
T4
T2
T1
T3
180
150
Limit Profile
Pre-heating
t1
Standard Profile
90s±30s
Time (s)
Standard Profile
Series
Limit Profile
Peak
Cycle
Temperature
of Reflow
(T2)
Time. (t1)
Heating
Temp. (T1)
Block Type EMIFILr
t2
Heating
Temp. (T3)
Time. (t2)
Peak
Cycle
Temperature
of Reflow
(T4)
NFA, NFE
NFL, NFM (Except NFM55P)
NFR
220°C min.
30 to 60s
245±3°C
2 times
max.
230°C min.
60s max.
260°C/10s
2 times
max.
NFW31S, NFM55P
220°C min.
30 to 60s
245±3°C
2 times
max.
230°C min.
60s max.
260°C/10s
1 time
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
143
Chip Ferrite Bead
NFp Chip EMIFILr
(3) Reworking with Solder Iron
The following conditions must be strictly followed when
using a soldering iron.
Pre-heating: 150°C 60s min.*1
*1 NFM55P: 100°C/60s+200°C/60s
Soldering iron power output / Tip diameter:
30W max. / ø3mm max.
Temperature of soldering iron tip / Soldering time / Times:
350°C max. / 3-4s / 2 times*2
2
* NFE31PT152Z1E9: 280°C max. / 10s max. / 2 times
Soldering and Mounting
Do not allow the tip of the soldering iron to directly
contact the chip.
For additional methods of reworking with a soldering iron,
please contact Murata engineering.
Following conditions should be observed when cleaning
chip EMI filter.
(1) Cleaning Temperature: 60°C max. (40°C max. for
alcohol type cleaner)
(2) Ultrasonic
Output: 20W/liter max.
Duration: 5 minutes max.
Frequency: 28 to 40kHz
(3) Cleaning Agent
The following list of cleaning agents have been tested on
the individual components. Evaluation of final assembly
should be completed prior to production.
(a) Alcohol cleaning agent
Isopropyl alcohol (IPA)
(b) Aqueous cleaning agent
Pine Alpha ST-100S
(4) Ensure that flux residue is completely removed.
Component should be thoroughly dried after aqueous
agent has been removed with deionized water.
Block Type EMIFILr
Chip Common Mode Choke Coil
Soldering
and Mounting
Chip EMIFILr
4. Cleaning
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
144
NFp
Packaging
Chip EMIFILr
1.75±0.1
Minimum Quantity and Dimensions of 8mm Width Paper / Embossed Tape
<Paper>
Chip Ferrite Bead
<Embossed>
c
d
a
3.5±0.05
8.0
2.0±0.05
4.0±0.1 4.0±0.1 ø1.5 +0.1
-0
c
Direction of Feed
b
c: Depth of Cavity
(Embossed Tape)
NFA18S, NFA21S_48 only.
NFA18S: ø0.8±0.1, NFA21S_48: ø1.0 +0.3
-0
c: Total Thickness of Tape
(Paper Tape)
Dimension of the cavity of embossed tape is measured at the bottom side.
Minimum Qty. (pcs.)
NFM18C/
NFM18PC (Except 105R/225B1A)/
1.85
NFM18PS
c
1.05
0.9 max.
NFM18PC105R/225B1A
1.1 max.
NFL18SP
0.9 max.
d
ø330mm Reel
Paper Tape Embossed Tape Paper Tape Embossed Tape
-
Bulk
4000
-
-
-
500
-
4000
-
-
-
500
-
4000
-
-
-
1000
1.85
1.05
NFL21SP
2.3
1.55
1.1 max.
NFM21
2.3
1.55
1.1 max.
-
4000
-
-
-
500
NFM3DC/3DP
3.4
1.4
0.85
0.2
-
4000
-
-
500
NFM31P
3.5
1.9
1.5
0.25
-
3000
-
-
500
NFA18S
1.8
1.0
0.7
0.25
-
4000
-
-
1000
NFA21S_45
2.30
1.55
0.7
0.25
-
4000
-
-
1000
NFA21S_48
2.25
1.45
1.05
0.25
-
4000
-
-
1000
NFA31G/31C
3.5
2.0
1.1 max.
-
4000
-
-
-
100
NFE31P
3.6
1.8
1.85
0.2
-
2000
-
8000
500
NFR21G
2.3
1.55
0.7
0.25
-
4000
-
-
500
NFW31S
3.6
1.9
2.0
0.2
-
2000
-
7500
-
NFL18ST
1.1 max.
Chip EMIFILr
b
Packaging
a
ø180mm Reel
Chip Common Mode Choke Coil
Cavity Size
Part Number
(in mm)
+0.1
a
Part Number
Cavity Size
Minimum Qty. (pcs.)
a
b
c
ø180mm Reel ø330mm Reel
NFM41
4.8
1.8
1.1
4000
-
Bulk
500
NFE61
7.2
1.9
1.75
2500
8000
500
Direction of Feed
Block Type EMIFILr
b
c
0.3
5.5±0.05
ø1.5 -0
12.0
2.0±0.05
4.0±0.1 4.0±0.1
1.75±0.1
Minimum Quantity and Dimensions of 12mm Width Embossed Tape
b
ø1.7±0.1
c
0.3
Part Number
12.0
ø1.5 +0.1
-0
5.5±0.05
a
2.0±0.05
8.0±0.1
4.0±0.1
1.75±0.1
c: Depth of Cavity
NFM55P
Cavity Size
Minimum Qty. (pcs.)
a
b
c
6.0
5.3
2.5
ø180mm Reel ø330mm Reel
500
-
Bulk
100
Direction of Feed
c: Depth of Cavity
Dimension of the cavity is measured at the bottom side.
(in mm)
"Minimum Quantity" means the number of units of each delivery or order. The quantity should be an integral multiple of the "Minimum Quantity".
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
145
Chip EMIFILr
Design Kits
Chip Ferrite Bead
NFp
Chip EMIFILr
oEKEMNFMCB (Chip EMIFILr Capacitor Type for Signal Lines)
No.
Part Number
Quantity
(pcs.)
Capacitance
Rated Voltage
(Vdc)
Rated Current
(mA)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NFM18CC220U1C3
NFM18CC470U1C3
NFM18CC101R1C3
NFM18CC221R1C3
NFM18CC471R1C3
NFM18CC102R1C3
NFM18CC222R1C3
NFM18CC223R1C3
NFM21CC220U1H3
NFM21CC470U1H3
NFM21CC101U1H3
NFM21CC221R1H3
NFM21CC471R1H3
NFM21CC102R1H3
NFM21CC222R1H3
NFM21CC223R1H3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
22pF±20%
47pF±20%
47pF±20%
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
22pF±20%
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
16
16
16
16
16
16
16
16
50
50
50
50
50
50
50
50
400
400
500
500
500
600
700
1000
700
700
700
700
1000
1000
1000
2000
Chip Common Mode Choke Coil
Design Kits
oEKEMFA31E (Chip EMIFILr Capacitor Array Type/ RC Combined Array Type)
No.
Part Number
Quantity
(pcs.)
Capacitance
Rated Voltage
(Vdc)
Rated Current
(mA)
1
2
3
4
5
6
7
8
NFA31CC220S1E4
NFA31CC470S1E4
NFA31CC101S1E4
NFA31CC221S1E4
NFA31CC471R1E4
NFA31CC102R1E4
NFA31CC222R1E4
NFA31CC223R1C4
10
10
10
10
10
10
10
10
22pF±20%
47pF±20%
100pF±20%
220pF±20%
470pF±20%
1000pF±20%
2200pF±20%
22000pF±20%
25
25
25
25
25
25
25
16
200
200
200
200
200
200
200
200
Block Type EMIFILr
oEKEMFL18F (Chip EMIFILr LC Combined Type)
No.
Part Number
Quantity
(pcs.)
Cut-off Frequency
Rated Voltage
(Vdc)
Rated Current
(mA)
DC Resistance
(Ω) max.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST207X1C3
NFL18ST307X1C3
NFL18ST507X1C3
NFL18SP157X1A3
NFL18SP207X1A3
NFL18SP307X1A3
NFL18SP507X1A3
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP207X1C3
NFL21SP307X1C3
NFL21SP407X1C3
NFL21SP507X1C3
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
50MHz
70MHz
100MHz
200MHz
300MHz
500MHz
150MHz
200MHz
300MHz
500MHz
10MHz
20MHz
50MHz
70MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
10
10
10
16
16
16
10
10
10
10
16
16
16
16
16
16
16
16
16
16
75
75
75
150
200
200
100
100
100
100
100
100
150
150
200
200
250
300
300
300
3.5
1.8
1.5
3.0
3.0
3.0
2.0
8.5
8.5
3.5
3.0
2.0
2.0
1.5
1.2
1.2
1.2
Continued on the following page.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
146
NFp Chip EMIFILr
Design Kits
Continued from the preceding page.
Part Number
21
22
23
24
25
26
27
28
29
NFW31SP106X1E4
NFW31SP206X1E4
NFW31SP506X1E4
NFW31SP107X1E4
NFW31SP157X1E4
NFW31SP207X1E4
NFW31SP307X1E4
NFW31SP407X1E4
NFW31SP507X1E4
Quantity Cut-off
(pcs.) Frequency
10
10
10
10
10
10
10
10
10
10MHz
20MHz
50MHz
100MHz
150MHz
200MHz
300MHz
400MHz
500MHz
Attenuation (dB min.)
10MHz
20MHz
50MHz 100MHz 150MHz 200MHz 300MHz 400MHz 500MHz
30
6dB max.
25
25
25
5
30
6dB max.
25
25
5
6dB max.
30
30
10
6dB max.
20
5
6dB max.
30
20
10
6dB max.
10
6dB max.
5
6dB max.
6dB max.
-
1GHz
30
30
30
30
30
30
15
10
10
Rated
Rated
Current Voltage
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
200mA
Chip Ferrite Bead
No.
25V
25V
25V
25V
25V
25V
25V
25V
25V
Quantity
(pcs.)
Cut-off Frequency
Rated Voltage
(Vdc)
Rated Current
(mA)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
NFA18SL506X1A45
NFA18SL137V1A45
NFA18SL187V1A45
NFA18SL207V1A45
NFA18SL227V1A45
NFA18SL307V1A45
NFA18SL357V1A45
NFA18SL407V1A45
NFA18SL487V1A45
NFA18SD187X1A45
NFA18SD207X1A45
NFA21SL506X1A48
NFA21SL806X1A48
NFA21SL207X1A45
NFA21SL207X1A48
NFA21SL307X1A45
NFA21SL307X1A48
NFA21SL287V1A45
NFA21SL287V1A48
NFA21SL317V1A45
NFA21SL317V1A48
NFA21SL337V1A45
NFA21SL337V1A48
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
50MHz
130MHz
180MHz
200MHz
220MHz
300MHz
350MHz
400MHz
480MHz
180MHz
200MHz
200MHz
80MHz
200MHz
200MHz
300MHz
300MHz
280MHz
280MHz
310MHz
310MHz
330MHz
330MHz
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
25
50
50
50
25
100
35
100
100
25
25
25
20
100
100
100
100
100
100
100
100
100
100
Design Kits
Part Number
Chip Common Mode Choke Coil
No.
Chip EMIFILr
oEKEMFA20H (Chip EMIFILr LC Combined Array Type)
No.
Part Number
Quantity
(pcs.)
Capacitance
Rated Voltage
(Vdc)
Rated Current
(A)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
NFM18PC104R1C3
NFM18PC224R0J3
NFM18PC474R0J3
NFM18PC105R0J3
NFM18PC225B0J3
NFM18PC225B1A3
NFM18PS474R0J3
NFM18PS105R0J3
NFM21PC104R1E3
NFM21PC224R1C3
NFM21PC474R1C3
NFM21PC105B1A3
NFM21PC105B1C3
NFM21PC225B0J3
NFM21PC475B1A3
NFM31PC276B0J3
NFM41PC204F1H3
NFM41PC155B1E3
NFE31PT152Z1E9
NFE31PT222Z1E9
NFE61PT102E1H9
NFE61PT472C1H9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0.1µF±20%
0.22µF±20%
0.47µF±20%
1µF±20%
2.2µF±20%
2.2µF±20%
0.47µF±20%
1µF±20%
0.1µF±20%
0.22µF±20%
0.47µF±20%
1µF±20%
1µF±20%
2.2µF±20%
4.7µF±20%
27µF±20%
0.2µF +80/-20%
1.5µF±20%
1500pF +50/-20%
2200pF±50%
1000pF +80/-20%
4700pF +80/-20%
16
6.3
6.3
6.3
6.3
10
6.3
6.3
25
16
16
10
16
6.3
10
6.3
50
25
25
25
50
50
2
2
2
4
2
4
2
2
2
2
2
4
4
4
6
6
2
6
6
6
2
2
Block Type EMIFILr
oEKEMNFMPH (Chip EMIFILr for Large Current)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
147
Similar pages