CREE CP41B-GFS-CL0N0674 P4 led Datasheet

Cree® P4 LED
CP41B-BFS/GFS
Data Sheet
This revolutionary package design allows the lighting designer to reduce
the number of LEDs required and provide a more uniform and unique
illuminated appearance than with other LED solutions.
This is possible through the efficient optical package design and high
current capabilities. The low profile package can be easily coupled with
reflectors or lenses to efficiently distribute light and provide the desired lit
appearance. This product family employs green and blue LED materials,
which allow designers to match the color of many lighting applications
like vehicle signal lamps and amusement lighting.
FEATURES
APPLICATIONS
• Size (mm): 7.6 x 7.6
• Channel Letter
• Color and Typical Dominant Wavelength (nm):
Green (527)
Blue (470)
• Amusement
• Luminous Flux (mlm)
Green (4400 - 8730)
Blue (1650 - 3300)
• Lead-Free
D-CT868.001
Data Sheet: CL
• RoHS Compliant
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Blue/Green
Forward Current
IF
35
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
154
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Peak Forward Current
Note
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
Note: Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Symbol
Condition
Unit
Forward Voltage
Characteristics
Blue/Green
Color
VF
IF = 30 mA
V
Reverse Current
Blue/Green
IR
VR = 5 V
μA
Blue
λD
IF = 30 mA
nm
460
470
475
Green
λD
IF = 30 mA
nm
515
527
535
Dominant Wavelength
Maximum
3.6
4.4
100
Blue
Φv
IF = 30 mA
mlm
1650
2500
Φv
IF = 30 mA
mlm
4400
6500
Blue/Green
2θ½
IF = 30 mA
deg
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
2
Typical
Green
Luminous Flux
50% Power Angle
Minimum
CLD-CT868.001
70
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Flux Bin Limit (IF = 30 mA)
Blue Green Bin Code
Min.(mlm)
Max.(mlm)
Bin Code
Min.(mlm)
Max.(mlm)
F0
1650
2200
L0
4400
5500
G0
2200
2750
M0
5500
6600
H0
2750
3300
N0
6600
8730
• Tolerance of measurement of luminous Flux is ±15%
Color Bin Limit (IF = 30 mA)
Blue Green Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
B3
460
465
G6
515
520
B4
465
470
G7
520
525
B5
470
475
G8
525
530
G9
530
535
• Tolerance of measurement of dominant wavelength is ±1 nm
VF Bin Limit (IF = 30 mA)
Blue Green Bin Code
Min.(V)
Max.(V)
Bin Code
Min.(V)
Max.(V)
27
2.8
3.0
27
2.8
3.0
28
3.0
3.2
28
3.0
3.2
29
3.2
3.4
29
3.2
3.4
2a
3.4
3.6
2a
3.4
3.6
2b
3.6
3.8
2b
3.6
3.8
2c
3.8
4.0
2c
3.8
4.0
2d
4.0
4.2
2d
4.0
4.2
2e
4.2
4.4
2e
4.2
4.4
• Tolerance of measurement of VF is ± 0.05V
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
3
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Luminous Flux (mlm)
Color
Kit Number
Viewing Angle
Blue
CP41B-BFS-CF0H0354
Blue
CP41B-BFS-CF0H0454
Blue
Dominant Wavelength
Min.
Max.
Color
Bin
70
1650
3300
B3
460
B5
475
70
1650
3300
B4
465
B5
475
CP41B-BFS-CG0H0454
70
2200
3300
B4
465
B5
475
Color
Kit Number
Viewing Angle
Green
CP41B-GFS-CL0N0694
Green
Green
Luminous Flux (mlm)
Min.
(nm)
Color
Bin
Max.
(nm)
Dominant Wavelength
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
70
4400
8730
G6
515
G9
535
CP41B-GFS-CL0N0674
70
4400
8730
G6
515
G7
525
CP41B-GFS-CL0N0784
70
4400
8730
G7
520
G8
530
Green
CP41B-GFS-CM0N0674
70
5500
8730
G6
515
G7
525
Green
CP41B-GFS-CM0N0784
70
5500
8730
G7
520
G8
530
Notes:
1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes.
Only one flux-bin code and one color-bin code will be shipped on each reel.
And single flux-bin code,single color bin-codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
4
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs







































































































The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
5
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.

Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
6
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
7
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Package
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water resistant, and they must be kept away from water and moisture.
The Tube Pack type of packaging.
Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
LOT
J OWAXXXXX -XX-XXX
QT Y
RANK
P CS
Iv
Vf
Hu e
X
XX
XX
AX XXX XXX XXX X
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree LED are registered trademarks of Cree, Inc.
8
CLD-CT868.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages