Rohm BU2506FV High-precision 10bit 8ch 10ch type d/a converter Datasheet

D/A Converter Series for Electronic Adjustments
High-precision 10bit
8ch・10ch Type D/A Converters
BU2506FV, BU2505FV
No.09052EAT03
●Description
BU2506FV and BU2505FV ICs are high performance 10bit R-2R type DACs with 8ch and 10ch outputs, respectively.
Cascade connection is possible, ensuring suitability with multi-channel applications. Each channel incorporates a full swing
output-type buffer amplifier with high speed output response characteristics, resulting in a greatly shortened wait time.
The ICs also utilize the TTL level input method, and with the RESET pin the output voltage can be kept in the lower reference
voltage range.
●Features
1) High performance, multi-channel R-2R-type 10bit D/A converter built-in
(BU2506FV: 8 channels, BU2505FV: 10 channels)
2) Full swing output type buffer amplifier incorporated at each output channel
3) The RESET terminal can keep the output voltage at all channels within the lower reference voltage range
4) Digital input compatible with TTL levels
5) 14bit 3-line serial data + RESET signal input (address 4bit + data 10bit)
6) Cascade connection available
7) LSB first / MSB first of 10bit data can be changed by the REVERSE terminal
8) Compact package: 0.65mm pitch, 20 pins (SSOP-B20)
●Applications
DVDs, CD-Rs, CD-RWs, Digital cameras
●Lineup
Parameter
BU2505FV
BU2506FV
4.5 to 5.5V
4.5 to 5.5V
10ch
8ch
Differential non linearity error
±1.0LSB
±1.0LSB
Integral non linearity error
±3.5LSB
±3.5LSB
10MHz
10MHz
SSOP-B20
SSOP-B20
Power source voltage range
Number of channels
Data transfer frequency
Package
●Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
Limits
Unit
Power source voltage
VCC
-0.3 to 6.0
V
D/A converter upper standard voltage
VDD
-0.3 to 6.0
V
Input voltage
VIN
-0.3 to 6.0
V
VOUT
-0.3 to 6.0
V
Storage temperature range
Tstg
-55 to 125
℃
Power dissipation
Pd
400*
mW
Output voltage
* Derated at 4mW/℃ at Ta>25℃, mounted on a 70x70x1.6mm FR4 glass epoxy board (copper foil area less than 3%)
Note: These products are not robust against radiation
●Recommended Operating Conditions(Ta=25℃)
Parameter
Symbol
Limits
Unit
Power supply voltage range
VCC
4.5 to 5.5
V
Operating temperature range
Topr
-30 to 85
℃
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
1/8
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Electrical Characteristics(Unless otherwise specified, VCC=5V, VrefH=5V, VrefL=0V, Ta=25℃)
Limits
Parameter
Symbol
Unit
Conditions
MIN.
TYP.
MAX.
<Digital unit>
Power source current
ICC
0.85
2.8
mA
At CLK=10MHz, IAO=0μA
Input leak current
IILK
-5
5
μA
VIN=0 to VCC
Input voltage L
VIL
0.8
V
Input voltage H
VIH
2.0
V
Output voltage L
VOL
0
0.4
V
IOL=2.5mA
Output voltage H
VOH
4.6
5
V
IOH=-2.5mA
<Analog unit>
4.5
7.5
mA
Consumption current
IrefH
Data condition : at maximum current
3.7
6.2
mA(*1)
D/A converter upper standard voltage
Outputs are not necessarily within
VrefH
3.0
5
V
setting range
the standard voltage setting range,
but ARE within the buffer amplifier
D/A converter lower standard voltage
VrefL
0
1.5
V
output voltage range (VO).
setting range
0.1
4.9
IO=±100μA
Buffer amplifier output voltage range
VO
V
0.2
4.75
IO=±1.0mA
Upper saturation voltage =0.35V
Buffer amplifier output drive range
IO
-2
2
mA
Lower saturation voltage =0.23V
Differential non-linearity error
DNL
-1.0
1.0
VrefH =4.796V
LSB
Integral non-linearity error
INL
-3.5
3.5
VrefL=0.7V
Precision
VCC=5.5V (4mV/LSB)
Zero point error
SZERO -25
25
mV
At no load (IO=+0mA )
Full scale error
SFULL
-25
25
Buffer amplifier output impedance
RO
5
15
Ω
Input voltage 0V
Pull-up I/O internal resistance value
Rup
12.5
25
37.5
kΩ
(Resistance value changes
according to voltage supplied)
*1 Value in the case where CH1 ~ CH8 are set to maximum current
●Timing Characteristics(Unless otherwise specified, VCC=5V, VrefH=5V, VrefL=0V, Ta=25℃)
Limits
Conditions
Parameter
Symbol
Unit
MIN.
TYP.
MAX.
Judgment level is 80% / 20% of VCC.
Reset L pulse width
tRTL
50
Clock L pulse width
tCKL
50
Clock H pulse width
tCKH
50
Clock rise time
tcr
50
Clock fall time
tcf
50
Data setup time
tDCH
20
nS
Data hold time
tCHD
40
Load setup time
tCHL
50
Load hold time
tLDC
50
Load H pulse width
tLDH
50
Data output delay time
tDO
90
CL=100pF
CL≦1000pF, VO:0.5V⇔4.5V .
DA output settling time
tLDD
7
20
μS
Until output becomes the final value 1/2LSB
RESET
tRTL
tcr
tCKH
tcf
CLK
tCKL
tLDC
DI
tLDH
LD
tDCH tCHD
tCHL
tLDD
DA
OUTPUT
tDo
DO
OUTPUT
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
2/8
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Cascade Connection
A cascade connection data output terminal (DO) is available for reducing the design load when the number of channels is increased.
The DO terminal can be connected directly to the data input terminal (DI) of the next stage. Its effectiveness increases as
the number of channels increases.The data transition timing is as shown below.
LD
CLK
DI
CPU
DO
LD
CLK
DI
BU2505FV
DO
LD
CLK
DI
BU2505FV
(* 2)
(* 1)
CLK
DI
Data of #1
LD
DO
Data of #2
In a cascade connection, in order to have sufficient data change and clock edge time margins, make the clock line the shortest.
●Block Diagrams
10
VDD
(VrefH)
AO8
9
8
AO7
AO6
7
6
5
Reset
D/A
D/A
5
Reverse
D/A
L
8
L
7
L
6
・・・
6
7
8
D9
D10 11 12
D13
AO5
4
3
D/A
2
AO3
1
VSS
(VrefL)
Buffer
operation
amplifier
10bit R-2R
DA converter
AO4
D/A
L
L
10bit Latch
Ch3
・・・
10bit Latch
Ch2
10bit R-2R
DA converter
19
1
4
L
D/A
5
DI
17
18
AO2
20
AO1
3/8
GND
2
AO3
1
VSS
(VrefL)
Buffer
operation
amplifier
AO5
4
3
D/A
10bit R-2R
DA converter
AO4
D/A
L
5
L
10bit Latch
Ch3
4
L
・・・
10bit Latch
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
D0
1
2
3
4
14bit
Shift register
15
LD
CLK
16
Reset
6
5
Reverse
5
D/A
10bit R-2R
DA converter
Ch2
1
18
19
20
AO1
AO2
GND
Address
decoder
VCC
11
12
TEST1
TEST2
13
14
DO
10
VDD
(VrefH)
AO8
9
8
7
AO7
D/A
D/A
L
6
・・・
Address
decoder
AO6
D/A
L
L
7
L
8
L
D/A
9
D/A
6
7
8
D9
D10 11 12
D13
DI
17
D0
1
2
3
4
14bit
Shift register
LD
15
16
CLK
BU2506FV
11
10
AO9
12
13
AO10
DO
14
VCC
BU2505FV
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Terminal Descriptions
No.
Terminal
Name
Analog /
Digital
I/O
Equivalent
Circuit
1
VSS
Analog
-
DA converter lower standard voltage (VrefL) input terminal
6
2
AO3
Analog
O
10bit D/A output(CH3)
4
3
AO4
Analog
O
10bit D/A output(CH4)
4
4
AO5
Analog
O
10bit D/A output(CH5)
4
5
Reverse
Digital
I
The reverse LSB and MSB of data designation 10bit in 14bit.
2
6
Reset
Digital
I
All ch analog output L fixed
2
7
AO6
Analog
O
10bit D/A output(CH6)
4
8
AO7
Analog
O
10bit D/A output(CH7)
4
9
AO8
Analog
O
10bit D/A output(CH8)
4
10
VDD
Analog
-
DA converter upper standard voltage (VrefH) input terminal
5
11
VCC
-
-
Power source terminal
-
12
AO9(TEST1)
Analog
O
10bit D/A output(CH9) (BU2506FV : test terminal)
4
13
AO10(TEST2)
Analog
O
10bit D/A output(CH10) (BU2506FV : test terminal)
4
14
DO
Digital
O
This outputs bit data of LSB of 14bit shift register.
3
15
LD
Digital
I
LD terminal. When High level is input, the value of 14bit shift
register is loaded to decoder and D/A output register.
1
16
CLK
Digital
I
Shift clock input terminal. At rise of shift clock, the signal from
DI terminal is input to 14bit shift register.
1
17
DI
Digital
I
Serial data input terminal. Serial data whose data length is 14bit
(address 4bit + data 10bit) is input.
1
18
AO1
Analog
O
10bit D/A output(CH1)
4
19
AO2
Analog
O
10bit D/A output(CH2)
4
20
GND
-
-
GND terminal
-
Description
*In the case of BU2506FV, be sure to leave the TEST1 and TEST2 terminals open
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
4/8
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Command Transmission
1) Reverse = open (or VCC short-circuit) setting
(Data: LSB first)
(1) Data format
Last
MSB
First
LSB
D13 D12 D11 D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
For address
selection
アドレス選択用
D/Aコンバータ出力設定用
For D/A
converter output setting
(2) Data timing diagram
LSB
D0
DI
D1
D2
D3
D11
D12
MSB
D13
CLK
LD
DA OUTPUT
D13
D12
D11
D10
D9
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
1
1
1
1
1
1
1
1
1
1
2) Reverse = L setting(Data: MSB first )
(1) Data format
D8
0
0
0
0
:
1
1
D7
0
0
0
0
:
1
1
Last
MSB
D4
D6
0
0
0
0
:
1
1
First
LSB
D5
D6
D7
D8
D9
D10 D11 D12 D13
For D/A
converter output setting
D/Aコンバータ出力設定用
D3
D2
D1
D0
For アドレス選択用
address selection
(2) Data timing diagram
DI
LSB
D0
D1
D2
D3
D11
D12
MSB
D13
CLK
LD
DA OUTPUT
D13
0
1
0
1
:
0
1
D12
0
0
1
1
:
1
1
D11
0
0
0
0
:
1
1
D10
0
0
0
0
:
1
1
D9
0
0
0
0
:
1
1
D8
0
0
0
0
:
1
1
D7
0
0
0
0
:
1
1
D6
0
0
0
0
:
1
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D5
0
0
1
1
:
1
1
D4
0
1
0
1
:
0
1
D3
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
D2
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
D5
0
0
0
0
:
1
1
D4
0
0
0
0
:
1
1
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Address Selection
Inconsequential
AO1 selection
AO2 selection
AO3 selection
AO4 selection
AO5 selection
AO6 selection
AO7 selection
AO8 selection
AO9 selection*1
AO10 selection*1
Inconsequential
Inconsequential
Inconsequential
Inconsequential
Inconsequential
D/A output (VrefH=VDD, VrefL=VSS)
VrefL
(VrefH-VrefL)/1024×1+VrefL
(VrefH-VrefL)/1024×2+VrefL
(VrefH-VrefL)/1024×3+VrefL
:
(VrefH-VrefL)/1024×1022+VrefL
(VrefH-VrefL)/1024×1023+VrefL
D1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
D0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Address selection
Inconsequential
AO1 selection
AO2 selection
AO3 selection
AO4 selection
AO5 selection
AO6 selection
AO7 selection
AO8 selection
AO9 selection*1
AO10 selection*1
Inconsequential
Inconsequential
Inconsequential
Inconsequential
Inconsequential
D/A output (VrefH=VDD, VrefL=VSS)
VrefL
(VrefH-VrefL)/1024×1+VrefL
(VrefH-VrefL)/1024×2+VrefL
(VrefH-VrefL)/1024×3+VrefL
:
(VrefH-VrefL)/1024×1022+VrefL
(VrefH-VrefL)/1024×1023+VrefL
*1 In the BU2506FV, this channel is for testing, therefore, do not designate.
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
5/8
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
6
6
5
5
5
4
4
4
3
2
1
0
VOUT [V]
6
VOUT [V]
3
2
1
1
0
0
0
200
400
600
800
1000
1200
0
200
Input Code [decimal]
600
1000
0
1200
1
35
1
0.5
30
0.5
-0.5
DNL [LSB]
1.5
0
25
20
400
600
800
1000
1200
4
4.2
4.4
4.6
4.8
Input Code [decimal]
5
5.2
5.4
5.6
5.8
0
6
1
1
0.5
0.5
0.5
INL [LSB]
1
INL [LSB]
1.5
0
-0.5
-0.5
-1
-1
-1
-1.5
400
600
800
1000
1200
200
400
600
800
1000
1200
0
200
Input Code [decimal]
1200
400
600
800
1000
1200
Fig.9 Integral linearity error(85℃)
2.52
40
35
5
2.51
code=1FFh
VOUT [V]
4
3
Ta=85℃
Ta=25℃
Ta=-30℃
30
2.5
Ta=85℃
Ta=25℃
25
20
2
1000
Input Code [decimal]
Fig.8 Integral linearity error(25℃)
6
800
-1.5
0
Input Code [decimal]
Fig.7 Integral linearity error(-30℃)
600
0
-0.5
200
400
Fig.6 Differential linearity error(85℃)
1.5
0
200
Input Code [decimal]
Fig.5 Differential linearity error(25℃)
-1.5
1200
-0.5
1.5
0
1000
0
Vin [V]
Fig.4 Differential linearity error
(-30℃)
800
-1.5
10
200
600
-1
15
-1.5
400
Fig.3 Output voltage linearity(85℃)
40
0
200
Input Code [decimal]
1.5
-1
INL [LSB]
800
Fig.2 Output voltage linearity(25℃)
Rup [kΩ]
DNL [LSB]
400
Input Code [decimal]
Fig.1 Output voltage linearity(-30℃)
ICC [mA]
3
2
Rup [kΩ]
VOUT [V]
●Electrical Characteristics Curves
code=000h
Ta=-30℃
2.49
15
1
code=3FFh
0
-40
10
2.48
-2.5
10
60
-1.5
-0.5
0.5
1.5
2.5
IOUT [mA]
4
4.2
4.4
4.6
4.8
5
5.2
5.4
5.6
5.8
6
Vin [V]
Temp. [ ℃ ]
Fig.10 Circuit current temperature
characteristic
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
Fig.11 Output load fluctuation characteristic
(input code : 1FFh)
6/8
Fig.12 Pull-up built in resistance
characteristic
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Equivalent Circuits
*1
1
3
to
inside
2
from
inside
4
・
5
・
6
to
inside
5
4
6
*1 25kΩ at Vcc = 5.0V (changes according to voltage supplied)
●Standard Example Application Circuit
V refH
VCC
V refL
AO1
CH1
AO2
CH2
AO3
CH3
R everse
R eset
C ontroller
LD
C LK
DI
A O 10
C H 10
GND
●Operation Notes
Ensure that a constant voltage is supplied to each of the 1 ground and 3 power supply terminals.
Insert a bypass capacitor between each power supply terminal and ground in order to prevent deterioration of the D/A
conversion accuracy due to ripple and noise signals.
A capacitor should be inserted between the output and ground in order to eliminate jitter and noise.
A capacitance up to 100pF is recommended (including the capacitance of the wire).
This IC can select to decode the 10bit DI data pattern using either LSB first or MSB first, depending on the conditions of the
REVERSE terminal. Therefore, be sure to stabilize the REVERSE terminal by leaving it open or short-circuiting VDD (LSB
first), or short-circuiting GND (MSB first).
Inserting a capacitor between the RESET terminal and GND and utilizing a time constant enables power ON reset functionality.
Furthermore, when inputting the reset signal from the controller, it is possible to fix the output of all channels to Low at the
low area of pulse.
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
7/8
2009.06 - Rev.A
Technical Note
BU2506FV,BU2505FV
●Ordering part number
B
U
2
Part No.
5
0
6
F
Part No.
2506
2505
V
-
Package
FV: SSOP-B20
E
2
Packaging and forming specification
E2: Embossed tape and reel
SSOP-B20
<Tape and Reel information>
6.5 ± 0.2
11
0.3Min.
4.4 ± 0.2
6.4 ± 0.3
20
1
Tape
Embossed carrier tape
Quantity
2500pcs
Direction
of feed
E2
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand
)
10
1.15 ± 0.1
0.1± 0.1
0.15 ± 0.1
0.1
0.65
0.22 ± 0.1
1pin
Reel
(Unit : mm)
www.rohm.com
© 2009 RzOHM Co., Ltd. All rights reserved.
8/8
Direction of feed
∗ Order quantity needs to be multiple of the minimum quantity.
2009.06 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller,
fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of
any of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
R0039A
Similar pages