Advantech MIC-5320A0-S1E Advancedtcaâ® 10gbe cpu blade with intelâ® xeonâ® 5500 series processor Datasheet

MIC-5320
AdvancedTCA® 10GbE CPU Blade with
Intel® Xeon® 5500 Series Processor
Features
NEW
 One Dual-Core or Quad-Core Intel® Xeon 5500 processor (Nehalem-EP)
 Intel® 5520 IOH36D / ICH10R server class chipset
 6 DDR3 VLP DIMMs up to 48 GB with ECC support
 Two XAUI ports on Fabric interface
 Two 1000BASE-T ports on Base interface
 Three 1000BASE-T front panel ports
 One mid size AMC slot with SAS/PCIe/RTM/CLK support
 Onboard serial attached SCSI (SAS) controller with failover support
 Fully managed, hot swappable RTM
Introduction
Advantech’s MIC-5320 single-slot AdvancedTCA® processor blade combines computing performance with I/O flexibility in a power efficient design. Supporting Intel’s latest Xeon®
processors using the new Nehalem microarchitecture and latest DDR3 technology with a 3 channel memory controller integrated into the CPU, the MIC-5320 outperforms previous
generation dual socket designs while providing better thermal characteristics. With built-in next generation processor readiness, there is a smooth upgrade path to future processors
supporting more than 4 cores.
Using Intel’s latest GbE and 10GbE MAC solutions supporting enhanced offloading techniques and virtualization features, MIC-5320 allows users to deploy the full power of multicore technology. All in all by combining the latest multi core technology, low latency / high speed DDR3 technology, and latest 10GbE technology, MIC-5320 is well suited for high
speed data plane applications. Supporting up to 48 GB of memory it can run database in memory applications easily. It is backed up by a 4 channel SAS RAID controller that makes
it equally suitable for control plane applications that require disk I/O with RAID and failover support.
The mid-size AMC bay supports more than just mass storage AMCs. With support for PCIe x4 gen 2 as well as base fabric channels and telco clock interfaces, it opens up possibilities
for high speed I/O interface integration, telco backhaul interface modules and co-processing engines. In addition to utilizing the chipset’s RASUM features, redundant BIOS flashes
and onboard USB disks, enhancements to BIOS and firmware to support CMOS backup, and override and HPM.1 upgradeability, make the MIC-5320 a true carrier grade solution.
MIC-5320’s overall design and built-in flexibility using FPGA technology, and RTM customization further enlarge the application fields of this product and reduce time-to- market.
Advantech’s world class customization services are ready to tune the MIC-5320 to meet customer-specific requirements.
Six DDR3 VLP DIMMs
Intel 1GbE/10GbE base and
fabric interfaces
ZD Connectors to RTM
4 channel PCIe
SAS controller
Mid-size AMC slot
Three 10/100/1000BASE-T ports Two USB
ports
User/Status
RS-232
console port LEDs
miniUSB console port
MIC-5320
Specifications
Processor System
Bus
Memory
Zone 2
Front I/O Interface
Operating System
IPMC
Watchdog Timer
AMC
Miscellaneous
Zone 3 (RTM)
Physical Characteristics
Environment
CPU
Max. Speed
Chipset
BIOS
QPI
Technology
Max. Capacity
Socket
Fabric interface
Base interface
Serial (COM)
Ethernet
USB 2.0
Compatibility
BMC Controller
IPMI
Hardware Monitor
Supervision
Interval
Site
Interface
Power budget
E5540 (4C/8T) (not NEBS compliant) or L5518 (4C/8T) or L5508 (2C/4T) Intel Nehalem processor
2.53 GHz
Intel IOH36D / ICH10R
Dual 16-Mbit BIOS firmware flashes with AMI embedded BIOS
5.86 GT/s
Triple channel DDR3 1066 MHz SDRAM (72-bit ECC Un-/ Registered)
Configurable up to 48 GB
6 VLP DIMMs
i82599 Dual 10GE MAC/PHY supporting two 10Base KX4 ports (XAUI)
i82576 PCIe dual GbE MAC/PHY supporting two 10/100/1000 Mbps ports
2 x86 Serial Ports (1 RJ-45 connector, 1 miniUSB connector)
2 10/100/1000BASE-T through PCIe based i82576 MAC/PHY, 1 10/100/1000 Mbps Chipset LAN
2 Type A ports
WindRiver PNELE2.0, Linux, PNELE3.0 in preparation
Renesas H8S/2166
Compliant with IPMI 1.5 using Pigeon Point System® (PPS) Solution
NuvoTon W83795ADG
1 BMC, 1 x86 BIOS POST, OS Boot, Application
IPMI compliant
1 mid-size AMC bay
SAS/SATA, PCI Express x4, RTM, Clock
30 watts
Solid State Disk
Two 1GB USB flash disks onboard
LED Indicators
Storage
Real Time Clock
RTM
Interface
Dimensions (W x D)
Weight
16
LSI 1064E onboard SAS controller with four ports up to 3 Gb/s
Built-in
Fully managed and hot swappable
4x SAS, 2x PCIe x1, PCIe x4, 2x SGMII, 3x USB, 2x UART, 2x SATA, SGPIO, AMC ports 14, 17..20
6HP, 294.56 x 322.25 mm (11.60" x 12.69")
2.675kg
Operating
Non-operating
0 ~ 55° C (32 ~ 131° F)
- 40 ~ 70° C (-40 ~ 158° F)
5 to 93%@40°C (non condensing)
95% @ 40° C (non-condensing)
5 G each axis
2.16 Grms, 30 mins each axis
1.5 Grms
2G
ETSI EN300019-2-1 Class1.2, EN300019-2-2 Class 2.3, ETSI EN300019-2-3 Class 3.1E
Designed to meet GR63-CORE
3.0 R3.0, 3.1 R1.0, AMC.0 R2.0, AMC.1 R2.0, AMC.2, AMC.3, HPM.1
CE mark (EN60950-2001), UL60950-1/CSAC22.2
FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024/EN300386)
Designed to meet GR1089-CORE
Temperature
Humidity
Shock
Vibration (5 ~ 500 Hz)
Environment
Compliance
PICMG
Safety & EMC
Ordering Information
Model number
MIC-5320A0-S1E
MIC-5320A1-S1E
MIC-5320A2-S1E
Related Products
Configuration
10GbE Ethernet fabric interface, 2C/4T CPU
10GbE Ethernet fabric interface, 4C/8T CPU L5518
10GbE Ethernet fabric interface, 4C/8T CPU E5540
Model number
MIC-5401
RTM-5101
Configuration
SAS HDD Carrier AMC
RTM Module for MIC-5320
Online Download www.advantech.com/products
Similar pages