Sanyo CPH3116 Dc / dc converter application Datasheet

CPH3116 / CPH3216
Ordering number : EN6405E
SANYO Semiconductors
DATA SHEET
CPH3116 / CPH3216
PNP / NPN Epitaxial Planar Silicon Transistors
DC / DC Converter Applications
Applications
•
Relay drivers, lamp drivers, motor drivers, flash.
Features
•
•
•
•
•
•
Adoption of MBIT processes.
Large current capacitance.
Low collector-to-emitter saturation voltage.
High-speed switching.
Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).
High allowable power dissipation.
( ) : CPH3116
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
(--50)80
V
Collector-to-Emitter Voltage
VCES
(--50)80
V
Collector-to-Emitter Voltage
VCEO
(--)50
V
Emitter-to-Base Voltage
VEBO
(--)5
V
(--)1.0
A
Collector Current
Base Current
IC
ICP
IB
Collector Dissipation
PC
Junction Temperature
Tj
Storage Temperature
Tstg
Collector Current (Pulse)
(--)3
(--)200
Mounted on a ceramic board (600mm2✕0.8mm)
A
mA
0.9
W
150
°C
--55 to +150
°C
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Collector Cutoff Current
ICBO
IEBO
Emitter Cutoff Current
DC Current Gain
hFE
Marking : CPH3116 : AR, CPH3216 : CR
Conditions
VCB=(--)40V, IE=0
VEB=(--)4V, IC=0
VCE=(--)2V, IC=(--)100mA
Ratings
min
typ
max
200
Unit
(--)0.1
µA
(--)0.1
µA
560
Continued on next page.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
http://semicon.sanyo.com/en/network
TOKYO OFFICE Tokyo Bldg.,
1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
81006EA MS IM / 62504 TS IM TB-00000308 / 83100 TS (KOTO) / 21000 TS (KOTO) TA-2706 No.6405-1/5
CPH3116 / CPH3216
Continued from preceding page.
Parameter
Symbol
Gain-Bandwideth Product
fT
Cob
Output Capacitance
Ratings
Conditions
min
typ
VCE=(--)10V, IC=(--)300mA
VCB=(--)10V, f=1MHz
VCE(sat)1
420
(--280)
IC=(--)500mA, IB=(--)10mA
IC=(--)300mA, IB=(--)6mA
VBE(sat)
IC=(--)500mA, IB=(--)10mA
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
V(BR)CBO
IC=(--)10µA, IE=0
V(BR)CES
IC=(--)100µA, RBE=0
Collector-to-Emitter Breakdown Voltage
V(BR)CEO
Emitter-to-Base Breakdown Voltage
V(BR)EBO
IC=(--)1mA, RBE=∞
IE=(--)10µA, IC=0
mV
130
190
mV
(--145)
(--220)
mV
90
135
mV
(--)0.81
(--)1.2
V
V
80
V
(--50)
V
80
V
(--)50
V
(--)5
Turn-ON Time
ton
See specified test circuit.
Storage Time
tstg
See specified test circuit.
tf
See specified test circuit.
Package Dimensions
pF
(--430)
(--50)
Collector-to-Emitter Breakdown Voltage
Fall Time
MHz
(9)6
Collector-to-Emitter Saturation Voltage
VCE(sat)2
Unit
max
V
35
ns
(170)
ns
330
ns
(30)40
ns
Switching Time Test Circuit
unit : mm (typ)
7015A-003
0.6
2.9
PW=20µs
DC≤1%
0.15
3
IB1
IB2
100µF
+
470µF
2
0.95
1 : Base
2 : Emitter
3 : Collector
0.4
VBE= --5V
VCC=25V
20IB1= --20IB2=IC=500mA
0.9
0.2
0.6
RL
+
50Ω
1
(For PNP, the polarity is reversed.)
OUTPUT
RB
VR
0.05
1.6
2.8
0.2
INPUT
SANYO : CPH3
IC -- VCE
A
m
--20
--30
40mA
--600
--4mA
--400
--2mA
--200
IB=0mA
0
--0.2
--0.4
--0.6
--0.8
Collector-to-Emitter Voltage, VCE -- V
--1.0
IT01643
800
Collector Current, IC -- A
A
--10m --8mA
--6mA
0
IC -- VCE
1000
10mA
8mA
30mA
20mA
mA
--5
0
--800
Collector Current, IC -- A
0
--4
mA
50mA
CPH3116
mA
--1000
6mA
4mA
600
2mA
400
200
IB=0mA
CPH3216
0
0
0.2
0.4
0.6
0.8
1.0
Collector-to-Emitter Voltage, VCE -- V
IT01644
No.6405-2/5
CPH3116 / CPH3216
IC -- VBE
--1.0
0.8
--0.6
--0.5
--0.4
--0.3
--0.1
0.6
0.5
0.4
0.3
0.2
0.1
0
0
0
--0.2
--0.4
--0.6
--0.8
--1.0
Base-to-Emitter Voltage, VBE -- V
0
--1.2
5
DC Current Gain, hFE
3
--25°C
25°C
100
7
5
2
3
5
7 --1.0
Collector Current, IC -- A
2
5
10
0.01
3
3
5
7
2
1000
7
5
3
2
100
7
5
3
5
7
1.0
2
3
IT01648
f T -- IC
CPH3216
VCE=10V
3
Gain-Bandwidth Product, f T -- MHz
CPH3116
VCE= --10V
2
0.1
Collector Current, IC -- A
5
3
3
2
--0.01
2
IT01647
f T -- IC
5
25°C
7
2
7 --0.1
--25°C
100
2
5
1.2
IT01646
CPH3216
VCE=2V
Ta=75°C
2
3
3
1.0
3
3
2
0.8
7
Ta=75°C
10
--0.01
0.6
hFE -- IC
1000
7
2
0.4
Base-to-Emitter Voltage, VBE -- V
CPH3116
VCE= --2V
5
0.2
IT01645
hFE -- IC
1000
DC Current Gain, hFE
0.7
C
25°C
--25°C
--0.7
Ta=7
5°
Collector Current, IC -- A
--0.8
--0.2
Gain-Bandwidth Product, f T -- MHz
CPH3216
VCE=2V
0.9
Ta=7
5°C
25°C
--25°C
Collector Current, IC -- A
--0.9
2
1000
7
5
3
2
100
7
5
3
2
3
5
7 --0.1
2
3
5
7 --1.0
Collector Current, IC -- A
2
2
0.01
3
2
3
5
3
2
10
7
5
3
3
5
7
2
1.0
3
IT01650
CPH3216
f=1MHz
7
Output Capacitance, Cob -- pF
5
2
0.1
Cob -- VCB
100
CPH3116
f=1MHz
7
7
Collector Current, IC -- A
IT01649
Cob -- VCB
100
Output Capacitance, Cob -- pF
IC -- VBE
1.0
CPH3116
VCE= --2V
5
3
2
10
7
5
3
2
2
5 7 --0.1
2
3
5 7 --1.0
2
3
5 7 --10
2
3
Collector-to-Base Voltage, VCB -- V
5 7 --100
IT01651
5 7 0.1
2
3
5 7 1.0
2
3
5 7 10
2
3
Collector-to-Base Voltage, VCB -- V
5 7 100
IT01652
No.6405-3/5
CPH3116 / CPH3216
VCE(sat) -- IC
5
3
2
--0.1
C
75°
Ta=
5
3
C
25°
--25°
C
2
--0.01
--0.01
2
3
5
7
2
--0.1
3
5
Collector Current, IC -- A
2
5°C
--0.1
7
Ta=
7
25°
C
5
--25°
C
3
2
3
5
7
3
2
--0.1
5
Collector Current, IC -- A
Base-to-Emitter
Saturation Voltage, VBE(sat) -- V
5
3
2
Ta= --25°C
7
75°C
25°C
3
2
--0.1
--0.01
2
3
5
7
2
--0.1
3
5
Collector Current, IC -- A
10
7
5
ICP=3A
IC=1A
1m
s
10
DC
m
10
s
op
0m
s
er
ati
on
Ta=25°C
Single pulse
Mounted on a ceramic board (600mm2✕0.8mm)
For PNP, minus sign is omitted.
2
3
2
3
5
7
2
0.1
3
5
7 1.0
IT01654
VCE(sat) -- IC
CPH3216
IC / IB=50
5
3
2
0.1
5°C
7
7
Ta=
5
25°
C
C
--25°
3
2
2
3
5
7
2
0.1
3
5
7 1.0
IT01656
VBE(sat) -- IC
CPH3216
IC / IB=50
5
3
2
1.0
Ta= --25°C
7
5
75°C
25°C
3
2
2
3
5
7
2
0.1
3
5
7 1.0
IT01658
PC -- Ta
1.4
CPH3116 / CPH3216
1.2
0.1
7
5
0.01
0.1
C
Collector Current, IC -- A
CPH3116 / CPH3216
2
2
°C
25
--25°
0.1
0.01
ASO
3
3
2
7
--1.0
IT01657
s
0µ µs
0
50
1.0
7
5
5°C
7
Ta=
3
Collector Current, IC -- A
7
10
3
2
5
10
7
Collector Current, IC -- A
--1.0
IT01655
CPH3116
IC / IB=50
5
7
0.01
0.01
7
VBE(sat) -- IC
--10
--1.0
0.1
7
3
2
2
1.0
CPH3116
IC / IB=50
--0.01
--0.01
3
Collector Current, IC -- A
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
5
--1.0
IT01653
Base-to-Emitter
Saturation Voltage, VBE(sat) -- V
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
7
5
0.01
0.01
7
VCE(sat) -- IC
--1.0
CPH3216
IC / IB=20
7
Collector Dissipation, PC -- W
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
7
7
VCE(sat) -- IC
1.0
CPH3116
IC / IB=20
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
--1.0
5 7 1.0
2
3
5 7 10
2
3
Collector-to-Emitter Voltage, VCE -- V
1.0
Mo
0.9
un
0.8
ted
on
ac
era
mi
0.6
cb
0.4
oa
rd
(60
0m
m2
✕0
.8m
0.2
m)
0
5
7 100
IT01659
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT01660
No.6405-4/5
CPH3116 / CPH3216
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of August, 2006. Specifications and information herein are subject
to change without notice.
PS No.6405-5/5
Similar pages