Elantec EL5123CY Product brief 12mhz 4-, 8-, 10- & 12-channel rail-to-rail input-output buffer Datasheet

12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers
Features
General Description
• 12MHz -3dB bandwidth
• Supply voltage = 4.5V to 16.5V
• Low supply current (per buffer) =
600µA
• High slew rate = 15V/µs
• Rail-to-rail input/output swing
• Ultra-small packages
The EL5123C, EL5223C, EL5323C, and EL5423C are low power,
high voltage rail-to-rail input/output buffers designed primarily for use
in reference voltage buffering applications for TFT_LCDs. They are
available in quad (EL5123C), octal (EL5223C), 10-channel
(EL5323C), and 12-channel (EL5423C) topologies. All buffers feature
a -3dB bandwidth of 12MHz and operate from just 600µA per buffer.
This family also features fast slewing and settling times, as well as a
continuous output drive capability of 30mA (sink and source).
Applications
•
•
•
•
•
•
•
•
•
•
•
•
TFT-LCD drive circuits
Electronics notebooks
Electronic games
Touch-screen displays
Personal communication devices
Personal digital assistants (PDA)
Portable instrumentation
Sampling ADC amplifiers
Wireless LANs
Office automation
Active filters
ADC/DAC buffers
Ordering Information
Part No
EL5123CY
Package
Tape & Reel
Outline #
10-Pin MSOP
MDP0043
EL5223CL
24-Pin LPP
MDP0046
EL5223CR
20-Pin TSSOP
MDP0044
EL5323CL
24-Pin LPP
MDP0046
EL5323CR
24-Pin TSSOP
MDP0044
EL5423CL
32-Pin LPP
MDP0046
EL5423CL
28-Pin TSSOP
MDP0044
The quad channel EL5123C is available in the 10-pin MSOP package.
The 8-channel EL5223C is available in both the 20-pin TSSOP and
24-pin LPP packages, the 10-channel EL5323C in the 24-pin TSSOP
and 24-pin LPP packages, and the 12-channel EL5423C in the 28-pin
TSSOP and 32-pin LPP packages. All buffers are specified for operation over the full -40°C to +85°C temperature range.
Connection Diagrams
1 VIN1
VOUT1 20
2 VIN2
VOUT2 19
3 VIN3
VOUT3 18
4 VIN4
VOUT4 17
5 VS+
VS- 16
6 VS+
VS- 15
VOUT5 14
8 VIN6
VOUT6 13
9 VIN7
VOUT7 12
10 VIN8
VOUT8 11
10 VOUT1
VIN2 2
9 VOUT2
VS+ 3
8 VS-
VIN3 4
7 VOUT3
VIN4 5
6 VOUT4
EL5123C
(10-Pin MSOP)
Connection Diagrams are continued on page 5
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
October 24, 2001
7 VIN5
VIN1 1
EL5223C
(20-Pin TSSOP Top View)
© 2001 Elantec Semiconductor, Inc.
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described
herein and makes no representations that they are free from patent infringement.
October 24, 2001
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used
within Life Support Systems without the specific written consent of
Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used
in accordance with instructions provided can be reasonably
expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support
Systems are requested to contact Elantec, Inc. factory headquarters
to establish suitable terms & conditions for these applications. Elantec, Inc.’s warranty is limited to replacement of defective
components and does not cover injury to persons or property or
other consequential damages.
Elantec Semiconductor, Inc.
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) ELANTEC
Fax:
(408) 945-9305
European Office: +44-118-977-6020
Japan Technical Center: +81-45-682-5820
2
Printed in U.S.A.
Similar pages