RG2A THRU RG2M GLASS PASSIVATED FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Amperes * FEATURES ♦ High temperature metallurgically bonded construction ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ 1.0 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Capable of meeting environmental standards of MIL-STD-19500 ♦ Fast switching for high efficiency ♦ High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension P A T E N T E D DO-204AP 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RG2A RG2B RG2D RG2G RG2J RG2K RG2M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375” (9.5mm) lead lengths at TA=55°C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps VF 1.3 Volts IR(AV) 1.0 100.0 µA IR 5.0 µA Maximum instantaneous forward voltage at 2.0A Maximum full load reverse current, full cycle average 0.375” (9.5mm) lead length at TA=25°C TA=100°C Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ 15.0 pF RΘJA 55.0 °C/W TJ, TSTG -65 to +175 °C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Measured with IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 150 200 250 500 ns RATINGS AND CHARACTERISTIC CURVES RG2A AND RG2M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE 50 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.0 Ipk/IAV=π 1.5 1.0 CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 0.5 0.375" (9.5mm) LEAD LENGTH 0 25 50 75 100 125 150 40 30 20 10 0 175 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 AMBIENT TEMPERATURE, °C NUMBER OF CYCLES AT 60 HZ FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 20 10 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 100 1.4 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 60 80 100 PERCENTAGE OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 30 TJ=25°C f=1.0 MHz Vsig=50mVp-p max. 10 1 1 10 REVERSE VOLTAGE, VOLTS 100