ON DCA010-TB-E Very high-speed switching diode Datasheet

DCA010
Very High-Speed Switching Diode
www.onsemi.com
Features
•
•
Ideally suited for use in hybrid ICs because of very small-sized package
Fast switching speed • Small interterminal capacitance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Raitings
Unit
Peak Reverse Voltage
VRM
85
V
Reverse Voltage
VR
80
V
Peak Forward Current
IFM
Unit rating
300
mA
Total rating
450
mA
IO
Unit rating
100
mA
Total rating
150
mA
Surge Current(1µs)
IFSM
Unit rating
4
Total rating
6
Allowable Power Dissipation
P
Junction Temperature
Tj
Storage Temperature
Tstg
Average Rectified Current
A
A
200
mW
125
°C
--55to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Raitings
Conditions
min
typ
max
VF1
IF=1mA
0.61
VF2
IF=10mA
0.74
VF3
IF=100mA
IR1
VR=30V
Interterminal Capacitance
IR2
C
Reverse Recovery Time
trr
Forward Voltage
Reverse Current
Marking:W5
Unit
V
V
1.20
V
0.1
mA
VR=80V
0.5
mA
VR=0V, f=1MHz
4.0
pF
IF=10mA, VR=6V, RL=50W, Irr=0.1Irp
4.0
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Reverse Recovery Time Test Circuit
Package Dimensions
0.01µF
0.4
1.5
2.5
3
0.5
unit:mm(typ.)
0
50W
0.16
--6V
0 to 0.1
50ns
0.8
1.1
1 0.95 0.95 2
1.9
2.9
0.5
Electrical Connection
2kW
IF=10mA
50W
0.1Irp
Irp
trr
Anode
1 : Cathode
2 : Cathode
3 : Anode
3
CP
1
Cathode
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
©Semiconductor Components Industries, LLC, 2014
December 2014 - Rev. 0
DUT
1
2
(Top view)
Cathode
Publication Order Nunber:
DCA010/D
DCA010
IF -- VF
103
5
2
Reverse Current, IR -- µA
102
5
5
2
1.0
25
°C
--25
°C
0°
C
2
10
Ta
=1
0
Forward Current, IF -- mA
Ta=100°C
5
2
5
2
10--1
1.0
75°C
5
2
50°C
10--1
5
25°C
2
10--2
5
5
2
10--2
IR -- VR
10
0
0.2
0.4
0.6
0.8
1.0
Forward Voltage, VF -- V
1.2
0
20
IT02033
trr -- IF
100
2
10--3
40
60
80
Reverse Voltage, VR -- V
C -- VR
3.0
f=1MHz
Interterminal Capacitance, C -- pF
Reverse Recovery Time, trr -- ns
7
5
3
2
10
7
5
3
2
1.0
7
5
0.1
2
3
5
1.0
2
3
5
10
Forward Current, IF -- mA
2
3
2.5
2.0
1.5
1.0
0.5
0
0.1
5
100
IT02035
2
ORDERING INFORMATION
Device
DCA010-TB-E
Package
Shipping
memo
CP
3,000 pcs. / reel
Pb-Free
www.onsemi.com
2
100
IT02034
3
5
1.0
2
3
5
10
2
Reverse Voltage, VR -- V
3
5
2
100
IT02036
DCA010
Package Dimensions
SC-59 / CP
CASE 318AN
ISSUE O
unit : mm
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not
designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
www.onsemi.com
3
Similar pages