Delta OPT-155B2L1RH 155mbps 1x9 sc duplex optical transceiver module for fast ethernet, atm, sonet/sdh stm-1/oc-3 Datasheet

OPT-155Bxxxx
155Mbps 1x9 SC Duplex Optical Transceiver Module for
Fast Ethernet, ATM, SONET/SDH STM-1/OC-3
Features:
z
Full Compliance with the Optical Performance
Requirements of the ATM 100Mbps and 100
Base-LX Version of IEEE 802.3u.
z
Industry Standard 1x9 Footprint and Duplex
SC Connector Interface.
z
Single 5V(OPT-155B1xxx)or 3.3V
(OPT-155B2xxx)Power Supply.
z
PECL Differential Inputs and Outputs.
z
PECL Receiver Signal Detect Indicator.
z
RoHS Compliant per Directive 2002/95/EC.
z
Wave Solder and Aqueous Wash Process
Compatible.
Description:
The OPT-155Bxxxx series are 1x9 optical
transceiver modules designed expressly for
high-speed communication applications that require
rates of up to 155Mbps. They are all compliant with
the SONET/SDH standards.
These PIN / Preamplifier combinations are coupled
into a custom quantizer IC which provides the final
pulse shaping for the logic output and the Signal
Detect function. The data output is differential. The
signal detect output is single-ended.
The OPT-155Bxxxx transceivers are supplied in
industry standard 1x9 SIP package style with
duplex SC connector.
Application:
The OPT-155Bxxxx also includes a Signal-Detect
circuit that provides PECL logic output state.
z
Single-mode Fiber Backbone Links.
z
Fast Ethernet and ATM Compatible.
z
Single-mode Fiber Media Converter.
The OPT-155Bxxxx transceivers are Class-1 eye
safety products and effective distance depends on
ITU-T G.957 standard or power penalty.
The transmitter sections utilize 1310nm Edge
Emitting InGaAsP Laser Diode. This Laser Diode is
packaged in the optical subassembly portion of the
transmitter section. A custom silicon IC that
converts differential PECL logical signals into an
analog LD driving current then drive it.
The receiver sections utilize InGaAs PIN
photodiodes coupled into a custom silicon
transimpedance preamplifier IC. These are
packaged in the optical subassembly portion of
receiver.
DELTA ELECTRONICS, INC.
http://www.deltaww.com
1
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Absolute Maximum Ratings
Parameter
Storage Temperature
Lead Soldering Temperature
Lead Soldering Time
Supply Voltage
Symbol
Ts
TSOLD
tSOLD
VCC
Min.
-40
Typ.
Max.
85
260
10
6
Unit
ºC
ºC
Sec.
V
Note
Symbol
Min.
100
0
Typ.
155.52
Max.
200
70
Unit
Mbps
ºC
Note
VCC
4.75
3.15
5
3.3
5.25
3.45
V
Symbol
Min.
Typ.
Max.
Unit
VIL-VCC
VIH-VCC
-1.81
-1.16
-1.48
-0.88
V
V
VOL-VCC
VOH-VCC
VSDH-VCC
VSDL-VCC
-1.95
-1.045
-1.95
-1.045
-1.62
-0.74
-1.62
-0.74
V
V
V
V
0
Recommended Operating Conditions
Parameter
Data Rate
Ambient Operating Temperature
Supply Voltage
OPT-155B1xxxx
OPT-155B2xxxx
Note: See ordering information for detail
TA
1
Electrical Characteristics
Parameter
Transmitter
Transmitter Data Input Voltage-Low
Transmitter Data Input Voltage-High
Receiver
Data Output Voltage-Low
Data Output Voltage-High
SD Output Voltage-Low
SD Output Voltage-High
Note
Optical Characteristics
(Data Rate = 155.52Mbps, PRBS=223-1, NRZ, 9/125um SMF)
Parameter
Symbol
Min.
Typ.
Max.
Transmitter
Supply Current
Icc
165
Mean Launch Power
-20
-15
OPT-155BxHxxx
-15
-8
OPT-155BxJxxx
PO
-8
-5
OPT-155BxLxxx
-5
0
OPT-155BxMxxx
Optical Extinction Ratio
OPT-155BxHxxx
OPT-155BxJxxx
OPT-155BxLxxx
OPT-155BxMxxx
Center Wavelength
Spectral Width (RMS)
OPT-155BxHxxx
OPT-155BxJxxx
OPT-155BxLxxx
OPT-155BxMxxx
E.R.
λC
DELTA ELECTRONICS, INC.
http://www.deltaww.com
1310
7.7
7.7
7.7
3
σ
Output Eye Diagram
Receiver
Supply Current
1270
8.2
8.2
8.2
10
1360
Unit
Note
mA
dBm
dB
nm
nm
Compliant with ITU-T recommendation G.957
Icc
145
2
mA
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Sensitivity
-31
OPT-155BxHxxx
-31
dBm
1
PIN
OPT-155BxJxxx
-31
OPT-155BxLxxx
-34
OPT-155BxMxxx
Overload
Pol
-8
dBm
Signal Detect-Asserted
OPT-155BxHxxx
-31
OPT-155BxJxxx
PA
-31
dBm
OPT-155BxLxxx
-31
OPT-155BxMxxx
-34
Signal Detect-DeAsserted
PD
-45
dBm
Signal Detect-Hysteresis
PA-PD
0.5
dB
Notes:
1. The sensitivity is provided at a BER of 1×10-10 or better with an input signal consisting of 155Mb/s, 223-1 PRBS
and ER=9dB.
Mask of the eye diagram for the optical transmit signal
DELTA ELECTRONICS, INC.
http://www.deltaww.com
3
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Pin Definition:
Functional description
PIN
Symbol
1
GND
2
RD (+)
Receiver Data Out (LVPECL or PECL)
3
RD (-)
Receiver Data Out Bar (LVPECL or PECL)
4
SD
Receiver Signal Detect (LVPECL、PECL)
5
VccR
Receiver Power Supply
6
VccT
Transmitter Power Supply
7
TD (-)
Transmitter Data In Bar (LVPECL or PECL)
8
TD (+)
Transmitter Data In (LVPECL or PECL)
9
GND
Receiver Signal Ground
Transmitter Signal Ground
Pin Descriptions:
Pin 1 Receiver Signal Ground, GND
Directly connect these pins to the ground plane.
Pin 2 Receiver Data Out (LVPECL), RD (+)
PECL logic family. Output external biased and internal dc coupled.
Pin 3 Receiver Data Out Bar (LVPECL), RD (-)
PECL logic family. Output external biased and internal dc coupled.
Pin 4 Receiver Signal Detect (LVPECL), SD
PECL logic family. Normal Operation: Logic “1” Output.
Fault Condition: Logic”0” Output.
Pin 5 Receiver Power Supply, VccR
Provide +3.3V dc power supply.
Pin 6 Transmitter Power Supply, VccT
Provide +3.3V dc power supply.
Pin 7 Transmitter Data In Bar (LVPECL), TD (-)
Pin 7 Transmitter Data Input (LVPECL), TD (-).
Pin 8 Transmitter Data In (LVPECL), TD (+)
Pin 8 Transmitter Data Input Bar (LVPECL), TD (+).
Pin 9 Transmitter Signal Ground, GND
Directly connect these pins to the ground plane.
DELTA ELECTRONICS, INC.
http://www.deltaww.com
4
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Recommend Circuit Schematic for Internal DC Coupled Transceivers
RX-VCC
TX-VCC
C3
C5
9
R1
8
7
6
5
4
3
2
1
R9
R3
TX-GND
TD+
R5
R7
RX-GND
RD+
TD-
RDSD
TX-VCC
RX-VCC
R2
R4
R10
Transceiver Top Niew
R6
L1
TX-VCC
R1=R3=R5=R7=R9=130 Ohm (3.3V), 82 Ohm (5V)
R2=R4=R6=R8=R10=82 Ohm (3.3V), 130 Ohm (5V)VCC
C3
C1=C2=C3=C5=C6=0.1 uF
C1
L2
RX-VCC
C4=10 uF
C4
L1=L2=1 uH or ferrite inductor
DELTA ELECTRONICS, INC.
http://www.deltaww.com
R8
5
C2
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Package Outline Drawing
DELTA ELECTRONICS, INC.
http://www.deltaww.com
6
Nov., 2006
Rev.:0G
OPT-155Bxxxx
Regulatory Compliance
Reference
Feature
Electromagnetic Interference
(EMI)
Performance
FCC Class B
EN 55022 Class B (CISPR 22A)
Radio Frequency
Electromagnetic Field
EN 61000-4-3
(1) Satisfied with electrical
characteristics of product
spec.
IEC 1000-4-3
Electrostatic Discharge to the
Duplex LC Receptacle
EN 61000-4-2
(2) No physical damage
IEC 1000-4-2
IEC 801.2
Electrostatic Discharge to the
Electrical Pins
MIL-STD-883E Method 3015.7
Eye Safety
US FDA CDRH AEL Class 1
CDRH File # 0321539-00
EN 60950: 2000
EN 60825-1: 1994+A11+A2
EN 60825-2: 2000
TUV Certificate No. R50032471
Component Recognition
Underwriters Laboratories and
UL File # E239394
Canadian Standards Association Joint
Component Recognition for Information
Technology Equipment Including
Electrical Business Equipment
Order information
OPT- 155X1X2X3X4X5X6X7
X1: Fiber
X5:
RoHS Compliant
Blank: Non-RoHS Compliant
R: RoHS Compliant
X6:
Performance
B: Single-mode 1310nm
X2: Power Supply Voltage and SD Level
1: 5.0V, PECL SD Level
2: 3.3V, PECL SD Level
Blank: Old Design
A: New Design
X7: Temperature
X3: Distance
Blank: 0 to +70 degree C
H: -10 to + 85 degree C
T: -40 to + 85 degree C
H: 2km
J: 15km
L: 30km
M: 40km
X4: Data Coupling
1: 1x9SC DC/DC
DELTA ELECTRONICS, INC.
http://www.deltaww.com
7
Nov., 2006
Rev.:0G
Similar pages