New Product SMC3K22CA thru SMC3K78CA Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Available in bi-directional polarity only • 3000 W peak pulse power capability with a (10/1000 μs) waveform • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AB (SMC) • Not recommended for PCB bottom side wave mounting • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS VWM 22 V to 78 V PPPM 3000 W TJ max. 150 °C TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: DO-214AB (SMC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: no marking on bi-directional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform Peak pulse current with a 10/1000 μs waveform Operating junction and storage temperature range SYMBOL VALUE UNIT PPPM (1) 3000 W See next table A - 55 to + 150 °C IPPM (1) TJ, TSTG Note (1) Non-repetitive current pulse and derated above T = 25 °C A Document Number: 89433 Revision: 18-May-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SMC3K22CA thru SMC3K78CA Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) (V) AT IT MIN. MAX. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) MAX. PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) SMC3K22CA 3BEX 24.4 26.9 1.0 22 2.0 84.5 35.5 SMC3K24CA 3BEZ 26.7 29.5 1.0 24 2.0 77.1 38.9 SMC3K26CA 3BFE 28.9 31.9 1.0 26 2.0 71.3 42.1 SMC3K28CA 3BFG 31.1 34.4 1.0 28 2.0 66.1 45.4 SMC3K30CA 3BFK 33.3 36.8 1.0 30 2.0 62.0 48.4 SMC3K33CA 3BFM 36.7 40.6 1.0 33 2.0 56.3 53.3 SMC3K36CA 3BFP 40.0 44.2 1.0 36 2.0 51.6 58.1 SMC3K40CA 3BFR 44.4 49.1 1.0 40 2.0 46.5 64.5 SMC3K43CA 3BFT 47.8 52.8 1.0 43 2.0 43.2 69.4 SMC3K45CA 3GFV 50.0 55.3 1.0 45 2.0 41.3 72.7 SMC3K48CA 3GFX 53.3 58.9 1.0 48 2.0 38.8 77.4 SMC3K51CA 3GFZ 56.7 62.7 1.0 51 2.0 36.4 82.4 SMC3K54CA 3GGE 60.0 66.3 1.0 54 2.0 34.4 87.1 SMC3K58CA 3GGG 64.4 71.2 1.0 58 2.0 32.1 93.6 SMC3K60CA 3GGK 66.7 73.7 1.0 60 2.0 31.0 96.8 SMC3K64CA 3GGM 71.1 78.6 1.0 64 2.0 29.1 103 SMC3K70CA 3GGP 77.8 86.0 1.0 70 2.0 26.5 113 SMC3K75CA 3GGR 83.3 92.1 1.0 75 2.0 24.8 121 SMC3K78CA 3GGT 86.7 95.8 1.0 78 2.0 23.8 126 Notes • Pulse test: tp 50 ms • Surge current waveform per fig. 3 and derated per fig.2 • All terms and symbols are consistent with ANSI/IEEE C62.35 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMC3K22CA-M3/57 0.257 57 850 7" diameter plastic tape and reel SMC3K22CA-M3/9A 0.257 9A 3500 13" diameter plastic tape and reel SMC3K22CAHM3/57 (1) 0.257 57 850 7" diameter plastic tape and reel SMC3K22CAHM3/9A (1) 0.257 9A 3500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89433 [email protected], [email protected], [email protected] Revision: 18-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SMC3K22CA thru SMC3K78CA Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 10 1 0.31" x 0.31" (8.0 mm x 8.0 mm) Copper Pad Area 0.1 0.1 Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1 10 1000 100 10 000 0 1.0 3.0 2.0 td - Pulse Width (µs) 4.0 t - Time (ms) Fig. 1 - Peak Pulse Power Derating Curve Fig. 3 - Pulse Waveform 100 10 000 CJ - Junction Capacitance (pF) Peak Pulse Power (Ppp) or Current (Ipp) Derating in % TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs 75 50 25 TJ = 25 °C f = 1.0 MHz Vstg = 50 mVp-p Measured at Zero Bias 1000 Measured at Stand-Off Voltage 100 0 0 25 50 75 100 125 10 150 20 30 40 50 60 70 80 90 100 Reverse Voltage (V) TJ - Initial Temperature (°C) Fig. 4 - Typical Junction Capacitance Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC J-Bend) Mounting Pad Layout 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.220 (5.59) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) MIN. 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.320 REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Document Number: 89433 Revision: 18-May-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000