ATMEL ATF22LV10CQZ-30JU Highperformance ee pld Datasheet

Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.0V to 5.5V Operating Range
Lowest Power in It Class
Advanced Low-voltage, Zero-power, Electrically Erasable Programmable Logic Device
“Zero” Standby Power (25 µA Maximum) (Input Transition Detection)
Low-voltage Equivalent of ATF22V10CZ
Ideal for Battery Powered Systems
CMOS- and TTL-compatible Inputs and Outputs
Inputs are 5V Tolerant
Latch Feature Hold Inputs to Previous Logic States
EE Technology
– Reprogrammable
– 100% Tested
High-reliability CMOS Process
– 20-year Data Retention
– 10,000 Erase/Write Cycles
– 2,000V ESD Protection
– 200 mA Latch-up Immunity
Commercial and Industrial Temperature Ranges
Dual Inline and Surface Mount Standard Pinouts
Green Package Options (Pb/Halide-free/RoHS Compliant) Available
Highperformance
EE PLD
ATF22LV10CZ
ATF22LV10CQZ
1. Description
The ATF22LV10CZ/CQZ is a high-performance CMOS (electrically erasable) programmable logic device (PLD) that utilizes Atmel’s proven electrically erasable Flash
memory technology and provides 25 ns speed with standby current of 25 µA maximum. All speed ranges are specified over the 3.0V to 5.5V range for industrial and
commercial temperature ranges.
The ATF22LV10CZ/CQZ provides a low-voltage and edge-sensing “zero” power
CMOS PLD solution with “zero” standby power (5 µA typical). The
ATF22LV10CZ/CQZ powers down automatically to the zero power mode through
Atmel’s patented Input Transition Detection (ITD) circuitry when the device is idle. The
ATF22LV10CZ/CQZ is capable of operating at supply voltages down to 3.0V. Pin
“keeper” circuits on input and output pins hold pins to their previous logic levels when
idle, which eliminate static power consumed by pull-up resistors. The “CQZ” combines
this low high-frequency ICC of the “Q” design with the “Z” feature.
The ATF22LV10CZ/CQZ macrocell incorporates a variable product term architecture.
Each output is allocated from 8 to 16 product terms which allows highly complex logic
functions to be realized. Two additional product terms are included to provide synchronous reset and asynchronous reset. These additional product terms are common
to all 10 registers and are automatically cleared upon power-up. Register Preload simplifies testing. A security fuse prevents unauthorized copying of programmed fuse
patterns.
0779L–PLD–12/05
Figure 1-1.
Block Diagram
2. Pin Configurations
Table 2-1.
Pin Configurations (All Pinouts Top View)
Pin Name
Function
CLK
Clock
IN
Logic Inputs
I/O
Bi-directional Buffers
GND
Ground
VCC
(3 to 5.5V) Supply
Figure 2-1.
TSSOP
1
2
3
4
5
6
7
8
9
10
11
12
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
Note:
Figure 2-2.
24
23
22
21
20
19
18
17
16
15
14
13
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
DIP/SOIC
CLK/IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
GND
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
VCC
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
IN
TSSOP is the smallest package of SPLD
offering.
PLCC
25
24
23
22
21
20
19
12
13
14
15
16
17
18
5
6
7
8
9
10
11
I/O
I/O
I/O
GND*
I/O
I/O
I/O
IN
IN
GND
GND*
IN
I/O
I/O
IN
IN
IN
GND*
IN
IN
IN
4
3
2
1
28
27
26
IN
IN
CLK/IN
VCC*
VCC
I/O
I/O
Figure 2-3.
Note:
2
For PLCC, pins 1, 8, 15, and 22 can be
left unconnected. For superior performance, connect VCC to pin 1 and GND
to pins 8, 15, and 22.
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
3. Absolute Maximum Ratings*
Temperature under Bias .................................. -40°C to +85°C
*NOTICE:
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V(1)
Voltage on Input Pins
with Respect to Ground
during Programming .....................................-2.0V to +14.0V(1)
Note:
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V(1)
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
1. Minimum voltage is -0.6V DC, which may undershoot to -2.0V for pulses of less than 20 ns.
Maximum output pin voltage is VCC + 0.75V DC,
which may overshoot to 7.0V for pulses of less
than 20 ns.
4. DC and AC Operating Conditions
Commercial
Industrial
Operating Temperature (Ambient)
0°C - 70°C
-40°C - 85°C
VCC Power Supply
3.0V - 5.5V
3.0V - 5.5V
3
0779L–PLD–12/05
4.1
DC Characteristics
Symbol
Parameter
Condition(2)
IIL
Input or I/O Low
Leakage Current
IIH
Input or I/O High
Leakage Current
ICC
ISB
Clocked Power
Supply Current
Power Supply Current,
Standby
Max
Units
0 ≤ VIN ≤ VIL (Max)
-10.0
µA
(VCC - 0.2)V ≤ VIN ≤ VCC
10.0
µA
VCC = Max
Outputs Open,
f = 15 MHz
VCC = Max
VIN = Max
Outputs Open
Min
Typ
CZ-25
Com.
50.0
85.0
mA
CZ-25
Ind.
55.0
90.0
mA
CQZ-30
Com.
18.0
50.0
mA
CQZ-30
Ind.
19.0
60.0
mA
CZ-25
Com.
3.0
25.0
µA
CZ-25
Ind.
4.0
50.0
µA
CQZ-30
Com.
3.0
25.0
µA
CQZ-30
Ind.
4.0
50.0
µA
-130.0
mA
IOS(1)
Output Short Circuit
Current
VIL
Input Low Voltage
-0.5
0.8
V
VIH
Input High Voltage
2.0
VCC + 0.75
V
VOL
Output Low Voltage
VIN = VIH or VIL
VCC = Min,
IOL = 16 mA
0.5
V
VOH
Output High Voltage
VIN = VIH or VIL
VCCIO = Min,
IOH = -2.0 mA
VOH
Output High Voltage
IOH = -100 µA
Note:
VOUT = 0.5V
2.4
V
VCC - 0.2V
V
1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec.
2. For DC characterization, the test condition of VCC = Max corresponds to 3.6V.
4
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
4.2
AC Waveforms
INPUTS, I/O
REG. FEEDBACK
SYNCH. PRESET
tS
tH
tW
tW
CP
tP
tAW
tAR
ASYNCH. RESET
tCO
tAP
REGISTERED
OUTPUTS
VALID
tER
4.3
OUTPUT
DISABLED
VALID
tPD
COMBINATORIAL
OUTPUTS
tEA
tER
VALID
VALID
tEA
OUTPUT
DISABLED
VALID
VALID
AC Characteristics(1)
-25
-30
Symbol
Parameter
Min
Max
Min
Max
Units
tPD
Input or Feedback to Non-registered Output
3.0
25.0
10.0
30.0
ns
tCF
Clock to Feedback
13.0
10.0
15.0
ns
tCO
Clock to Output
2.0
15.0
4.0
20.0
ns
tS
Input or Feedback Setup Time
15.0
18.0
ns
tH
Input Hold Time
0
0
ns
tP
Clock Period
25.0
30.0
ns
tW
Clock Width
12.5
15.0
ns
fMAX
External Feedback 1/(tS + tCO)
Internal Feedback 1/(tS + tCF)
No Feedback 1/(tP)
33.3
35.7
40.0
tEA
Input to Output Enable
3.0
25.0
tER
Input to Output Disable
3.0
tAP
Input or I/O to Asynchronous Reset of Register
3.0
tSP
Setup Time, Synchronous Preset
15.0
20.0
ns
tAW
Asynchronous Reset Width
25.0
30.0
ns
tAR
Asynchronous Reset Recovery Time
25.0
30.0
ns
tSPR
Synchronous Preset to Clock Recovery Time
15.0
20.0
ns
Note:
25.0
30.0
33.3
MHz
MHz
MHz
10.0
30.0
ns
25.0
10.0
30.0
ns
25.0
10.0
3.0
ns
1. See ordering information for valid part numbers.
5
0779L–PLD–12/05
4.4
Input Test Waveforms
4.4.1
Input Test Waveforms and Measurement Levels
4.4.2
Output Test Loads
Note:
4.5
Similar competitors devices are specified with slightly different loads. These load differences may
affect output signals’ delay and slew rate. Atmel devices are tested with sufficient margins to meet
compatible device specification conditions.
Pin Capacitance
Table 4-1.
Typ
Max
Units
Conditions
CIN
5
8
pF
VIN = 0V
CI/O
6
8
pF
VOUT = 0V
Note:
4.6
Pin Capacitance (f = 1 MHz, T = 25°C(1))
1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100%
tested.
Power-up Reset
The registers in the ATF22LV10CZ/CQZ are designed to reset during power-up. At a point
delayed slightly from VCC crossing VRST, all registers will be reset to the low state. The output
state will depend on the polarity of the buffer.
This feature is critical for state machine initialization. However, due to the asynchronous nature
of reset and the uncertainty of how VCC actually rises in the system, the following conditions are
required:
1. The VCC rise must be monotonic and start below 0.7V.
2. The clock must remain stable during TPR.
3. After TPR, all input and feedback setup times must be met before driving the clock pin
high.
4.7
Preload of Register Outputs
The ATF22LV10CZ/CQZ’s registers are provided with circuitry to allow loading of each register
with either a high or a low. This feature will simplify testing since any state can be forced into the
registers to control test sequencing. A JEDEC file with preload is generated when a source file
6
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
with vectors is compiled. Once downloaded, the JEDEC file preload sequence will be done automatically by most of the approved programmers after the programming.
5. Electronic Signature Word
There are 64 bits of programmable memory that are always available to the user, even if the
device is secured. These bits can be used for user-specific data.
6. Security Fuse Usage
A single fuse is provided to prevent unauthorized copying of the ATF22LV10CZ/CQZ fuse patterns. Once programmed, fuse verify and preload are inhibited. However, the 64-bit User
Signature remains accessible.
The security fuse should be programmed last, as its effect is immediate.
7. Programming/Erasing
Programming/erasing is performed using standard PLD programmers. See CMOS PLD Programming Hardware & Software Support for information on software/ programming.
Table 7-1.
Programming/Erasing
Parameter
Description
Typ
Max
Units
TPR
Power-up
Reset Time
600
1000
ns
VRST
Power-up
Reset Voltage
2.3
2.7
V
8. Input and I/O Pin Keepers
All ATF22LV10CZ/CQZ family members have internal input and I/O pin-keeper circuits. Therefore, whenever inputs or I/Os are not being driven externally, they will maintain their last driven
state. This ensures that all logic array inputs and device outputs are at known states. These are
relatively weak active circuits that can be easily overridden by TTL-compatible drivers (see input
and I/O diagrams below).
Figure 8-1.
Input Diagram
VCC
100K
INPUT
ESD
PROTECTION
CIRCUIT
7
0779L–PLD–12/05
Figure 8-2.
I/O Diagram
VCC
OE
DATA
I/O
VCC
INPUT
100K
9. Functional Logic Diagram Description
The Functional Logic Diagram describes the ATF22LV10CZ/CQZ architecture.
The ATF22LV10CZ/CQZ has 12 inputs and 10 I/O macrocells. Each macrocell can be configured into one of four output configurations: active high/low or registered/combinatorial. The
universal architecture of the ATF22LV10CZ/CQZ can be programmed to emulate most 24-pin
PAL devices.
Unused product terms are automatically disabled by the compiler to decrease power consumption. A security fuse, when programmed, protects the contents of the ATF22LV10CZ/CQZ. Eight
bytes (64 fuses) of User Signature are accessible to the user for purposes such as storing
project name, part number, revision or date. The User Signature is accessible regardless of the
state of the security fuse.
8
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
Figure 9-1.
Functional Logic Diagram ATF22LV10CZ/CQZ
9
0779L–PLD–12/05
ATF22LV10CZ/CQZ STANDBY CURRENT VS.
SUPPLY VOLTAGE (T A = 25°C)
NORMALIZED I CC VS. TEMP
1.2
NORMALIZED ICC
3.500
3.000
ICC (uA)
2.500
2.000
1.500
1.000
0.500
0.000
3.00
3.30
1.1
1.0
0.9
0.8
-40.0
0.0
25.0
TEMPERATURE (C)
3.60
75.0
VCC (V)
ATF22LV10CQZ SUPPLY CURRENT VS.
INPUT FREQUENCY (VCC = 3.3V, T A = 25°C)
ATF22LV10CZ SUPPLY CURRENT VS.
INPUT FREQUENCY (VCC = 3.3V, T A = 25°C)
25.000
50.000
20.000
ICC (mA)
60.000
ICC (mA)
40.000
30.000
15.000
10.000
5.000
20.000
0.000
10.000
0.0
0.5
2.5
0.000
0
0.5
2.5
5
7.5
10
Frequency (MHz)
25
37.5
50
ATF22LV10CZ/CQZ SOURCE CURRENT VS.
SUPPLY VOLTAGE (VOH = 2.4V)
7.5
10.0
25.0
37.5
50.0
ATF22LV10C/CZ OUTPUT SOURCE CURRENT VS.
OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
0.0
0.0
-2.0
-2.0
-4.0
IOH (mA)
Ioh (mA)
5.0
Frequency (MHz)
-4.0
-6.0
-6.0
-8.0
-8.0
-10.0
-10.0
-12.0
-14.0
-12.0
3.0
3.2
3.3
3.5
2.0
3.6
2.2
2.4
2.6
2.8
VOH (V)
3.0
3.2
3.3
ATF22LV10CZ/CQZ OUTPUT SINK CURRENT VS.
SUPPLY VOLTAGE (VOL = 0.5V)
40.0
39.0
38.0
37.0
36.0
35.0
34.0
33.0
32.0
100.0
80.0
60.0
40.0
20.0
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
10
ATF22LV10CZ/CQZ OUTPUT SINK CURRENT VS.
OUTPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
IOL (mA)
IOL (mA)
SUPPLY VOLTAGE (V)
3.5
3.6
0.0
0.00
0.50
1.00
1.50
2.00
VOL (V)
2.50
3.00
3.30
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
ATF22LV10CZ/CQZ INPUT CURRENT VS.
INPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
INPUT CURRENT (µA)
INPUT CURRENT (mA)
ATF22LV10CZ/CQZ INPUT CLAMP CURRENT VS.
INPUT VOLTAGE (VCC = 3.3V, TA = 25°C)
20.0
0.0
-20.0
-40.0
-60.0
-80.0
-100.0
-120.0
0.0
-0.2
-0.4
-0.6
INPUT VOLTAGE (V)
-0.8
15.0
10.0
5.0
0.0
-5.0
0.0
-1.0
1.1
1.0
0.9
3.0
3.2
3.3
3.5
3.6
SUPPLY VOLTAGE (V)
3.0
3.5
4.0
1.1
1.0
0.9
0.8
-40.0
NORMALIZED TCO VS. VCC
NORMALIZED TCO
1.1
1.0
0.9
0.8
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
0.0
25.0
TEMPERATURE (C)
75.0
NORMALIZED TCO VS. TEMP
1.2
NORMALIZED TCO
1.5
2.0
2.5
INPUT VOLTAGE (V)
NORMALIZED TPD VS. TEMP
0.8
3.5
3.6
1.2
1.1
1.0
0.9
0.8
-40.0
0.0
25.0
75.0
TEMPERATURE (C)
NORMALIZED TSU VS. VCC
NORMALIZED TSU VS. TEMP
1.2
1.2
NORMALIZED TSU
NORMALIZED TSU
1.0
1.2
1.2
NORMALIZED TPD
NORMALIZED TPD
NORMALIZED TPD VS. VCC
0.5
1.1
1.0
0.9
0.8
3.0
3.2
3.3
SUPPLY VOLTAGE (V)
3.5
3.6
1.1
1.0
0.9
0.8
-40.0
0.0
25.0
75.0
TEMPERATURE (C)
11
0779L–PLD–12/05
22LV10CZ/CQZ DELTA TPD VS.
OUTPUT LOADING
22LV10CZ/CQZ DELTA TCO VS.
OUTPUT LOADING
15.0
DELTA TCO (ns)
DELTA TPD (ns)
15.0
10.0
5.0
0.0
-5.0
0.00
0.50
1.00
1.50
2.00
OUTPUT LOADING (PF)
2.50
10.0
5.0
0.0
-5.0
0.00
3.00
2.50
3.00
DELTA TCO VS. # OF OUTPUT SWITCHING
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.1
-0.1
-0.2
-0.2
-0.3
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
NUMBER OF OUTPUTS SWITCHING
12
1.00
1.50
2.00
OUTPUT LOADING (PF)
0.0
0.0
-0.1
DELTA TCO (ns)
DELTA TPD (ns)
DELTA TPD VS. # OF OUTPUT SWITCHING
0.50
9.0
10.0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
NUMBER OF OUTPUTS SWITCHING
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
10. Ordering Information
10.1
Standard Package Options
tPD (ns)
tS (ns)
25
10.2
15
15
Ordering Code
Package
Operation Range
ATF22LV10CZ-25JC
ATF22LV10CZ-25PC
ATF22LV10CZ-25SC
ATF22LV10CZ-25XC
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
ATF22LV10CZ-25JI
ATF22LV10CZ-25PI
ATF22LV10CZ-25SI
ATF22LV10CZ-25XI
28J
24P3
24S
24X
Industrial
(-40°C to +85°C)
ATF22LV10CQZ-30JC
ATF22LV10CQZ-30PC
ATF22LV10CQZ-30SC
ATF22LV10CQZ-30XC
28J
24P3
24S
24X
ATF22LV10CQZ-30JI
ATF22LV10CQZ-30PI
ATF22LV10CQZ-30SI
ATF22LV10CQZ-30XI
28J
24P3
24S
24X
Commercial
(0°C to 70°C)
Industrial
(-40°C to +85°C)
ATF22LV10CQZ Green Package Options (Pb/Halide-free/RoHS Compliant)
tPD (ns)
tS (ns)
30
10.3
tCO (ns)
15
tCO (ns)
Ordering Code
Package
Operating Range
15
ATF22LV10CQZ-30JU
ATF22LV10CQZ-30PU
ATF22LV10CQZ-30SU
ATF22LV10CQZ-30XU
28J
24P3
24S
24X
Industrial
(-40°C to +85°C)
Using “C” Product for Industrial
To use commercial product for industrial temperature ranges, simply de-rate ICC by 15% on the
“C” device. No speed de-rating is necessary.
Package Type
28J
28-lead, Plastic J-leaded Chip Carrier (PLCC)
24P3
24-pin, 0.300" Wide, Plastic Dual Inline Package (PDIP)
24S
24-lead, 0.300" Wide, Plastic Gull Wing Small Outline (SOIC)
24X
24-lead, 4.4 mm Wide, Plastic Thin Shrink Small Outline (TSSOP)
13
0779L–PLD–12/05
11. Packaging Information
11.1
28J – PLCC
1.14(0.045) X 45˚
PIN NO. 1
1.14(0.045) X 45˚
0.318(0.0125)
0.191(0.0075)
IDENTIFIER
E1
D2/E2
B1
E
B
e
A2
D1
A1
D
A
0.51(0.020)MAX
45˚ MAX (3X)
COMMON DIMENSIONS
(Unit of Measure = mm)
Notes:
1. This package conforms to JEDEC reference MS-018, Variation AB.
2. Dimensions D1 and E1 do not include mold protrusion.
Allowable protrusion is .010"(0.254 mm) per side. Dimension D1
and E1 include mold mismatch and are measured at the extreme
material condition at the upper or lower parting line.
3. Lead coplanarity is 0.004" (0.102 mm) maximum.
SYMBOL
MIN
NOM
MAX
A
4.191
–
4.572
A1
2.286
–
3.048
A2
0.508
–
–
D
12.319
–
12.573
D1
11.430
–
11.582
E
12.319
–
12.573
E1
11.430
–
11.582
D2/E2
9.906
–
10.922
B
0.660
–
0.813
B1
0.330
–
0.533
e
NOTE
Note 2
Note 2
1.270 TYP
10/04/01
R
14
2325 Orchard Parkway
San Jose, CA 95131
TITLE
28J, 28-lead, Plastic J-leaded Chip Carrier (PLCC)
DRAWING NO.
REV.
28J
B
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
11.2
24P3 – PDIP
D
PIN
1
E1
A
SEATING PLANE
A1
L
B
B1
e
E
COMMON DIMENSIONS
(Unit of Measure = mm)
C
eC
eB
Notes:
1.
2.
This package conforms to JEDEC reference MS-001, Variation AF.
Dimensions D and E1 do not include mold Flash or Protrusion.
Mold Flash or Protrusion shall not exceed 0.25 mm (0.010").
SYMBOL
MIN
NOM
MAX
A
–
–
5.334
A1
0.381
–
–
D
31.623
–
32.131
E
7.620
–
8.255
E1
6.096
–
7.112
B
0.356
–
0.559
B1
1.270
–
1.651
L
2.921
–
3.810
C
0.203
–
0.356
eB
–
–
10.922
eC
0.000
–
1.524
e
NOTE
Note 2
Note 2
2.540 TYP
6/1/04
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
24P3, 24-lead (0.300"/7.62 mm Wide) Plastic Dual
Inline Package (PDIP)
DRAWING NO.
24P3
REV.
D
15
0779L–PLD–12/05
11.3
24S – SOIC
B
D1
D
PIN 1 ID
PIN 1
e
E
A
COMMON DIMENSIONS
(Unit of Measure = mm)
A1
0º ~ 8º
L1
L
SYMBOL
MIN
NOM
MAX
A
–
–
2.65
A1
0.10
–
0.30
D
10.00
–
10.65
D1
7.40
–
7.60
E
15.20
–
15.60
B
0.33
–
0.51
L
0.40
–
1.27
L1
0.23
–
0.32
e
NOTE
1.27 BSC
06/17/2002
R
16
2325 Orchard Parkway
San Jose, CA 95131
TITLE
24S, 24-lead (0.300" body) Plastic Gull Wing Small Outline (SOIC)
DRAWING NO.
REV.
24S
B
ATF22LV10C(Q)Z
0779L–PLD–12/05
ATF22LV10C(Q)Z
11.4
24X – TSSOP
Dimensions in Millimeter and (Inches)*
JEDEC STANDARD MO-153 AD
Controlling dimension: millimeters
0.30(0.012)
0.19(0.007)
4.48(0.176)
6.50(0.256)
4.30(0.169)
6.25(0.246)
PIN 1
0.65(0.0256)BSC
7.90(0.311)
1.20(0.047)MAX
7.70(0.303)
0.15(0.006)
0.05(0.002)
0.20(0.008)
0º ~ 8º
0.09(0.004)
0.75(0.030)
0.45(0.018)
04/11/2001
R
2325 Orchard Parkway
San Jose, CA 95131
TITLE
24X, 24-lead (4.4 mm body width) Plastic Thin Shrink Small Outline
Package (TSSOP)
DRAWING NO.
REV.
24X
A
17
0779L–PLD–12/05
12. Revision History
Version No./Release Date
History
Revision L – November 2005
18
1. Added Green Package options
ATF22LV10C(Q)Z
0779L–PLD–12/05
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
0779L–PLD–12/05
Similar pages