STMicroelectronics MJB44H11T4 Low collector-emitter saturation voltage Datasheet

MJB44H11T4
Low voltage NPN power transistor
Datasheet - production data
Features
• Low collector-emitter saturation voltage
TAB
• Fast switching speed
Applications
• Power amplifier
3
1
• Switching circuits
D2PAK
Description
Figure 1. Internal schematic diagram
This device is an NPN transistor manufactured
using new low voltage planar technology with
double metal process. The result is a transistor
which boasts exceptionally high gain performance
coupled with very low saturation voltage.
Table 1. Device summary
Order codes
Marking
Package
Packaging
MJB44H11T4
MJB44H11
D2PAK
Tape and reel
May 2014
This is information on a product in full production.
DocID022716 Rev 2
1/11
www.st.com
Absolute maximum ratings
1
MJB44H11T4
Absolute maximum ratings
Table 2. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCEO
Collector-emitter voltage (IB = 0)
80
V
VEBO
Emitter-base voltage (IC = 0)
5
V
Collector current
10
A
Collector peak current
20
A
PTOT
Total dissipation at Tcase = 25 °C
50
W
TSTG
Storage temperature
-55 to 150
°C
150
°C
Value
Unit
IC
ICM
TJ
Max. operating junction temperature
Table 3. Thermal data
Symbol
2/11
Parameter
RthJC
Thermal resistance junction-case max
2.5
°C/W
RthJA
Thermal resistance junction-ambient max
62.5
°C/W
DocID022716 Rev 2
MJB44H11T4
2
Electrical characteristics
Electrical characteristics
Tcase = 25 °C; unless otherwise specified.
Table 4. Electrical characteristics
Symbol
Parameter
VCEO(sus)(1)
Collector-emitter
sustaining voltage (IB = 0)
IC = 30 mA
ICES
Collector cut-off current
(VBE = 0)
VCE = 80 V
-
10
µA
IEBO
Emitter cut-off current
(IC = 0)
VEB = 5 V
-
50
µA
VCE(sat)(1)
Collector-emitter
saturation voltage
IC = 8 A
IB = 0.4 A
-
1
V
VBE(sat)(1)
Base-emitter saturation
voltage
IC = 8 A
IB = 0.8 A
-
1.5
V
IC = 2 A_
VCE = 1 V
60
-
IC = 4 A_ _
VCE = 1 V
40
-
hFE(1)
DC current gain
Test conditions
Min.
Typ.
80
-
Max.
Unit
V
1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %.
DocID022716 Rev 2
3/11
11
Electrical characteristics
2.1
MJB44H11T4
Electrical characteristics (curves)
Figure 2. Safe operating area
*$ "
* $ ."9
16-4&%
Figure 3. Derating curve
16-4&01&3"5*0/
* $ ."9
$0/5
˜T
˜T
NT
%$01&3"5*0/
'PSTJOHMFOPO
SFQFUJUJWFQVMTF
7 $& 7
$0Y
Figure 4. DC current gain
4/11
DocID022716 Rev 2
Figure 5. Collector-emitter saturation
voltage
MJB44H11T4
3
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Figure 6. D²PAK (TO-263) drawing
0079457_T
DocID022716 Rev 2
5/11
11
Package mechanical data
MJB44H11T4
Table 5. D²PAK (TO-263) mechanical data
mm
Dim.
Min.
Typ.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
E
10
E1
8.50
10.40
e
2.54
e1
4.88
5.28
H
15
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
6/11
Max.
0.4
0°
8°
DocID022716 Rev 2
MJB44H11T4
Package mechanical data
Figure 7. D²PAK footprint(a)
16.90
12.20
5.08
1.60
3.50
9.75
Footprint
a. All dimension are in millimeters
DocID022716 Rev 2
7/11
11
Packaging mechanical data
4
MJB44H11T4
Packaging mechanical data
Figure 8. Tape
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
8/11
DocID022716 Rev 2
MJB44H11T4
Packaging mechanical data
Figure 9. Reel
T
REEL DIMENSIONS
40mm min.
Access hole
At slot location
B
D
C
N
A
Full radius
G measured at hub
Tape slot
in core for
tape start 25 mm min.
width
AM08851v2
Table 6. D²PAK (TO-263) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base qty
1000
P2
1.9
2.1
Bulk qty
1000
R
50
T
0.25
0.35
W
23.7
24.3
DocID022716 Rev 2
Min.
Max.
330
13.2
26.4
30.4
9/11
11
Revision history
5
MJB44H11T4
Revision history
Table 7. Document revision history
10/11
Date
Revision
Changes
23-Jan-2012
1
Initial release.
12-May-2014
2
Updated Section 3: Package mechanical data.
Added Section 4: Packaging mechanical data.
DocID022716 Rev 2
MJB44H11T4
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID022716 Rev 2
11/11
11
Similar pages