Nichicon LGJ2Z181MELC Aluminum electrolytic capacitor Datasheet

ALUMINUM ELECTROLYTIC CAPACITORS
GJ(15)
Snap-in Terminal Type, Low-Profile Sized,
Wide Temperature Range.
series
Withstanding 2000 hours application of rated ripple current at 105°C.
Smaller than low-profile GJ series.
Ideally suited for flat design of switching power supply.
Adapted to the RoHS directive (2002/95/EC).
GJ
Low
Profile
GJ (15)
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 ~ +105°C (160~250V) , – 25 ~ +105°C (315 ~ 400V)
Rated Voltage Range
160 ~ 400V
Rated Capacitance Range
39 ~ 390µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I
tan δ
0.20 MAX.
3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
120Hz
20°C
Measurement frequency : 120Hz
Rated voltage(V)
Stability at Low Temperature
Z – 25°C/ Z+20°C
Z – 40°C/ Z+20°C
Impedance ratio ZT/Z20(MAX.)
160 ~ 250
3
12
315 • 400
8
—
Endurance
After an application of DC voltage (in the range of rated DC voltage
even after over-lapping the specified ripple current) for 2000 hours
at 105°C, capacitors meet the characteristic requirements listed at
right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
Shelf Life
After storing the capacitors under no load at 105°C for 1000
hours, and after performing voltage treatment based
on JIS C 5101-4 clause 4.1 at 20°C,
they will meet the requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±15% of initial value
150% or less of initial specified value
Initial specified value or less
Marking
Printed with white color letter on black sleeve.
Type numbering system (Example : 200V 330µF)
Drawing
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGJ 2D 3 3 1 MELC 1 5
Polarity bar
Sleeve (P.E.T.)
10 ±0.
0.8 +0.2
-0.1
10
15±2
2-2 f±0.1
4.0±0.5
Pressure relief vent
+0.21
0.8 -0.
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (330µF)
Rated voltage (200V)
Series name
Type
4.0±0.5
2.5
f
D +1MAX.
1
1.5 +0.2
-0.1
(PC board hole dimensions) (Terminal dimensions)
Case length code
Case dia. code
fD
Code
20
Y
22
Z
25
A
30
B
35
C
Dimensions
Cod
Cap.(µF)
V(Code)
160V (2C)
180V (2Z)
200V (2D)
250V (2E)
315V (2F)
400V (2G)
e
039
047
056
068
082
100
120
150
180
220
270
330
390
390
470
560
680
820
101
121
151
181
221
271
331
391
20 × 15
22 × 15
25 × 15
30 × 15
30 × 15
35 × 15
20 × 15
22 × 15
25 × 15
30 × 15
30 × 15
35 × 15
35 × 15
0.55
0.65
0.80
0.95
1.00
1.20
0.50
0.60
0.75
0.85
1.00
1.10
1.20
20 × 15
22 × 15
25 × 15
25 × 15
30 × 15
30 × 15
35 × 15
0.45
0.55
0.65
0.75
0.90
1.00
1.10
22 × 15
25 × 15
30 × 15
30 × 15
35 × 15
35 × 15
0.50
0.60
0.70
0.75
0.90
1.00
22 × 15
25 × 15
30 × 15
30 × 15
35 × 15
35 × 15
0.35
0.40
0.45
0.50
0.55
0.60
22 × 15
25 × 15
30 × 15
30 × 15
35 × 15
35 × 15
0.30
0.35
0.40
0.45
0.50
0.55
Case size
φ D × L (mm)
Rated
ripple
Rated Ripple (Arms) at 105°C 120Hz
Frequency coefficient of rated ripple current
Frequency (Hz)
160 ~ 250V
Coeff.
315 · 400V
50
0.81
0.77
60
0.85
0.82
120
1.00
1.00
300
1.17
1.16
1k
1.32
1.30
10k~
1.45
1.41
50k~
1.50
1.43
Minimum order quantity : 50pcs.
CAT.8100V
Similar pages