IVO GE333.0224135 Incremental encoder Datasheet

Incremental encoders
Stainless steel housing, hollow shaft max. ø12 mm
Resolution 5...6000 pulses
GE333
Features
–– Encoder with hollow shaft ø12 mm
–– Stainless steel design
–– Optical sensing
–– Resolution max. 6000 ppr
–– Clamping ring on housing
–– Temperature range -25...+100°C (5 VDC)
Technical data - mechanical design
Voltage supply
Housing
ø58 mm
Shaft
ø12 mm hollow shaft
Protection DIN EN 60529
IP 64
Operating speed
≤6000 rpm
Starting torque
≤0.03 Nm
Rotor moment of inertia
14.5 gcm²
Materials
Housing: stainless steel 1.4305
Flange: stainless steel 1.4305
Operating temperature
-25...+100 °C (5 VDC)
-25...+85 °C (24 VDC)
Relative humidity
95 % non-condensing
Resistance
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Weight approx.
500 g
E-connection
Cable 1 m
5 VDC ±10 %
4.75...30 VDC
Reverse polarity protection Yes (4.75...30 VDC)
Consumption w/o load
≤30 mA (24 VDC)
≤60 mA (5 VDC)
Resolution (steps/turn)
5...6000
Reference signal
Zero pulse, width 90°
Sensing method
Optical
Output frequency
≤150 kHz
Output signals
A 90° B, N + inverted
Output circuit
Linedriver RS422
Push-pull short-circuit proof
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Approval
UL approval / E63076
1
www.baumerivo.com
13/11/2008
Technical data - electrical ratings
Subject to modification in technic and design. Errors and omissions excepted.
GE333 with hollow shaft
Incremental encoders
Stainless steel housing, hollow shaft max. ø12 mm
Resolution 5...6000 pulses
GE333
Accessories
Part number
GE333.
Mounting accessories
41
Z 119.023
See part number (pulses)
Spring coupling for encoders with ø58 mm
housing
E-connection
41 Cable 1 m, radial
Voltage supply / signals
22 5 VDC / linedriver RS422
70 4.75...30 VDC / push-pull
72 4.75...30 VDC / linedriver
RS422 (5 VDC)
Hollow shaft / torque pin
0 Hollow shaft ø12 mm clamping ring on
housing with pin 15 mm
A Hollow shaft ø12 mm clamping ring on
housing without pin
Part number (pulses)
49
36
50
39
40
41
(5)
(10)
(25)
(50)
(60)
(100)
57
06
09
13
14
15
(128)
(200)
(250)
(360)
(400)
(500)
22
23
24
26
28
30
(1000)
(1024)
(1250)
(1500)
(2000)
(2500)
31
34
35
48
(3600)
(4096)
(5000)
(6000)
2
www.baumerivo.com
13/11/2008
Subject to modification in technic and design. Errors and omissions excepted.
Other pulse numbers upon request.
Example: ordering key 23 = 1024 pulses
Incremental encoders
Stainless steel housing, hollow shaft max. ø12 mm
Resolution 5...6000 pulses
GE333
Output signals
Terminal assignment
Clockwise rotating direction when looking at flange.
Core colour Assignment
pink
Track B inv.
Track A
blue
UB-Sense
red
Track N (zero pulse)
Track A
black
Track N inv. (zero pulse inv.)
brown
Track A
green
Track A inv.
–
–
grey
Track B
–
–
Track B
Track B
white/green GND
white
90°
GND-Sense
brown/green UB
Zero pulse
UB-Sense and GND-Sense are directly connected to UB
resp. GND.
Please use cores twisted in pairs (for example track A /
track A inv.) for extension cables of more than 10 m length.
3
Outputs
Linedriver RS422
Output level High
>2.5 V (I = -20 mA)
Output level Low
<0.5 V (I = 20 mA)
Load High
<20 mA
Load Low
<20 mA
Outputs
Push-pull short-circuit proof
Output level High
>UB -3 V (I = -20 mA)
Output level Low
<0.5 V (I = 20 mA)
Load High
<20 mA
Load Low
<20 mA
www.baumerivo.com
Subject to modification in technic and design. Errors and omissions excepted.
Trigger level
13/11/2008
Zero pulse
Incremental encoders
Stainless steel housing, hollow shaft max. ø12 mm
Resolution 5...6000 pulses
GE333
Dimensions
1
15
ø58
60
ø42
ø24
ø4fg6
ø12H7
51
46
16
M3 x 6
3.5
4
www.baumerivo.com
13/11/2008
Subject to modification in technic and design. Errors and omissions excepted.
13
Similar pages