Source FTM-5012S-G80G 1.25gbps gbic transceiver Datasheet

May 18, 2006
1.25Gbps GBIC Transceiver
(For 80km transmission, RoHS compliant)
Members Of FlexonTM Family
Standard
Compatible with GBIC specification (SFF-8053),
Rev 5.5
Compatible with IEEE 802.3z
Compatible with IEEE 802.3ah
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
RoHS Compliant
Description
Features
Fiberxon 1.25Gbps GBIC transceivers are high
1.25Gbps bit-rate
performance, cost effective modules. It is designed
1550nm DFB laser and PIN photodiode for
for
80km transmission
transmission distance.
Gigabit
Ethernet
application
of
80km
Class I laser product
Low EMI and excellent ESD protection
The transceiver consists of two sections: The
Duplex SC optical interface
transmitter section incorporates a highly reliable
Extended power supply +3.3/5.0V compatibility
uncooled DFB laser. And the receiver section
Standard serial ID information compatible with
consists of a PIN photodiode mounted together with
SFF-8053
a trans-impedance preamplifier (TIA). All modules
Operating case temperature: 0 to +70°C
satisfy Class I Laser Safety requirements.
Applications
The standard serial ID information compatible with
GBIC MSA describes the transceiver’s capabilities,
standard
interfaces,
manufacturer
and
other
Switch to Switch interface
information. The host equipment can access this
Switched backplane applications
information via the 2-wire serial CMOS EEPROM
Router/Server interface
protocol. For further information, please refer to
Other optical transmission systems
SFF-8053.
FTM-5012S-G80G is RoHS compliant.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer
to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office
listed at the end of the documentation.
Table 1 - Regulatory Compliance
Feature
Standard
Electrostatic Discharge
MIL-STD-883E
(ESD) to the Electrical Pins
Method 3015.7
Electrostatic Discharge (ESD)
IEC 61000-4-2
to the Duplex LC Receptacle
GR-1089-CORE
Electromagnetic
Interference (EMI)
Immunity
Performance
Class 1(>500 V)
Compatible with standards
FCC Part 15 Class B
EN55022 Class B (CISPR 22B)
Compatible with standards
VCCI Class B
IEC 61000-4-3
Compatible with standards
FDA 21CFR 1040.10 and 1040.11
Compatible with Class I laser
EN60950, EN (IEC) 60825-1,2
product.
Component Recognition
UL and CSA
Compatible with standards
RoHS
2002/95/EC 4.1&4.2
Compliant with standards
Laser Eye Safety
Absolute Maximum Ratings
Absolute Maximum Ratings are those values beyond which damage to the devices may occur.
Table 2 – Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
Storage Temperature
TS
-40
+85
°C
Supply Voltage
VCC
-0.5
6
V
-
5
95
%
Operating Humidity
Recommended Operating Conditions
Table 3 - Recommended Operating Conditions
Parameter
Symbol
Min.
Operating Case Temperature
TC
Power Supply Voltage
VCC
Power Supply Current
ICC
Data Rate
Typical
Max.
Unit
0
+70
°C
3.1
5.5
V
300
mA
1.25
Gbps
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 2 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Optical and Electrical Characteristics
Table 4 –Optical and Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
1550
1580
nm
4.7
dBm
1
nm
Notes
Transmitter
Centre Wavelength
λC
1530
Average Output Power
P0ut
0
Spectral Width (-20dB)
∆λ
Side Mode Suppression Ratio
Extinction Ration
SMSR
30
dB
EX
9
dB
P0ut@TX Disable Asserted
-45
dBm
1
2
Rise/Fall Time (20%~80%)
tr/tf
0.26
ns
Total Jitter
TJ
0.431
UI
Deterministic Jitter
DJ
0.2
UI
Output Optical Eye
IEEE 802.3z
Data Input Swing Differential
VIN
650
Input Differential Impedance
ZIN
140
TX Disable
2000
mV
160
Ω
2.0
Vcc+0.3
V
Enable
0
0.8
V
Host_VCC-0.5
Host_Vcc+0.3
V
0
0.5
V
1660
nm
-22
dBm
Normal
3
4
Disable
Fault
TX Fault
150
1
5
Receiver
Centre Wavelength
λC
1200
Receiver Sensitivity
Receiver Overload
-3
dBm
Return Loss
12
dB
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
-23
-35
1
dBm
dBm
4
dB
Total Jitter
TJ
0.749
UI
Deterministic Jitter
DJ
0.462
UI
370
2000
mV
High
Host_VCC-0.5
Host_Vcc+0.3
V
Low
0
0.5
V
Data Output Swing Differential
LOS
VOUT
6
3
5
Note:
1.
The optical power is launched into SMF.
2.
Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps
3.
Measured with a PRBS 27 –1 test [email protected], meet the specified maximum output jitter
requirements if the specified maximum input jitter is present.
4.
Measured with a PRBS 27 –1 test [email protected].
5.
AC coupled and terminated.
6.
Worst-case Extinction Ration, measured with a PRBS 27 –1 test [email protected], BER≤1×10-12.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 3 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
EEPROM Information
The SFF-8053 defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities,
standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at
the 8-bit address 1010000X (A0h). The memory contents refer to Table 5
Table 5 - EEPROM Serial ID Memory Contents (A0h)
Field Size
Addr.
(Bytes)
Name of Field
Hex
Description
0
1
Identifier
01
GBIC
1
1
Ext. Identifier
04
MOD4
2
1
Connector
01
SC
3—10
8
Transceiver
00 00 00 02 10 10 01 01
11
1
Encoding
01
8B10B
12
1
BR, nominal
0D
1.25Gbps
13
1
Reserved
00
14
1
Length (9um)-km 50
15
1
Length (9um) FF
16
1
Length (50um) 00
17
1
Length (62.5um) 00
18
1
Length (copper) 00
19
1
Reserved
20—35
16
Vendor name
36
1
Reserved
37—39
3
Vendor OUI
40—55
16
Vendor PN
56—59
4
Vendor rev
xx xx xx xx
60-62
3
Reserved
00 00 00
63
1
CC BASE
xx
64—65
2
Options
00 1A
66
1
BR, max
00
67
1
BR, min
00
68—83
16
Vendor SN
84—91
8
92—94
1
Reserved
00
95
1
CC_EXT
xx
96—255
160
Vendor specific
Transmitter Code
80km
00
46 49 42 45 52 58 4F 4E
20 49 4E 43 2E 20 20 20
“FIBERXON INC. “(ASCⅡ)
00
00 00 00
46 54 4D 2D 35 30 31 32
53 2D 47 38 30 47 20 20
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
Vendor date codexx xx xx xx xx xx 20 20
“FTM-5012S-G80G ” (ASCⅡ)
ASCⅡ( “31 30 20 20” means 1.0 revision)
Check sum of bytes 0 - 62
LOS, TX_FAULT and TX_DISABLE
ASCⅡ
Year (2 bytes), Month (2 bytes), Day (2 bytes)
Check sum of bytes 64 - 94
Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the
related document of SFF-8053 Rev 5.5.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 4 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Recommended Interface Circuit
Figure 1 shows the recommended interface circuit.
Host Board
GBIC Module
Vcc
Vcc
10K Ω
2×4.7K to 10KΩ
TX Disable
TX Fault
Protocol
IC
SERDES
IC
SerDat Out +
Z=75Ω
TD +
SerDat Out -
Z=75Ω
TD -
SerDat In +
Z=75Ω
SerDat In -
Z=75Ω
Laser
driver
RD +
Amplifier
RD -
LOS
Vcc
3×4.7K to 10KΩ
MOD-DEF2
EEPROM
MOD-DEF1
MOD-DEF0
RGND
Figure 1, Recommended Interface Circuit
Pin Definitions
Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in
Table 6.
Figure 2, Pin View
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 5 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Table 6 – Pin Function Definitions
Pin Name
Pin #
Name/Function
Signal Specification
RECEIVER SIGNALS
RGND
2, 3, 11,
14
Receiver Ground
(may be connected with TGND in GBIC)
Receiver +3.3/5 volt
VDDR
15
-RX_DAT
12
Receive Data, Differential PECL
+RX_DAT
13
Receive Data, Differential PECL
(may be connected with VDDT in GBIC)
Ground, to GBIC
Power, to GBIC
High speed serial,
from GBIC
High speed serial,
from GBIC
Receiver Loss of Signal, logic high, open
RX_LOS
1
collector compatible, 4.7k to 10kΩpull up to
Low speed, from GBIC
VDDT on host
TRANSMITTER SIGNALS
TGND
8, 9, 17,
20
Transmitter Ground
(may be connected with RGND internally)
Transmitter +3.3/5 volt
VDDT
16
+TX_DAT
18
Transmit Data, Differential PECL
-TX_DAT
19
Transmit Data, Differential PECL
(may be connected with VDDR in GBIC)
Ground, to GBIC
Power, to GBIC
High speed serial,
to GBIC
High speed serial,
to GBIC
Transmitter Disable, logic high, open collector
TX_DISABLE
7
compatible, 4.7k to 10kΩpull up to VDDT on
Low speed, to GBIC
GBIC
TX_FAULT
10
Transmitter Fault, logic high, open collector
compatible, 4.7k to 10kΩpull up to VDDT on host
Low speed, from GBIC
CONTROL SIGNALS
MOD_DEF(0)
4
TTL low, output
Please reference
MOD_DEF(1)
5
SCL serial clock signal, input
SFF-8053, Annex D:
MOD_DEF(2)
6
SDA serial data signal, input/output
Module definition “4”
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 6 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Mechanical Design Diagram
The mechanical design diagram is shown in Figure 3.
3.05
1.70
9.90
11.90
27.95
57.30
65.60
8.30
12.99
30.30
25.50
30.50
33.20
12.75
37.48
Figure 3, Mechanical Design Diagram of GBIC(1550nm)
Ordering information
FTM
Wavelength
5: 1550nm
Function
0: Standard
5
0
1
2
S
G
Package
G: GBIC
8
0
Distance
80: 80km
G
Others
G: RoHS Compliance
Receptable
S: SC
Data rate
12: 1.25Gbps
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 7 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
1.25G GBIC Transceiver
80 km transmission, RoHS compliant
May. 18, 2006
Part No.
FTM-5012S-G80G
Product Description
1550nm, 1.25Gbps, 80km, RoHS compliant, GBIC, 0°C~+70°C
Related Documents
For further information, please refer to the following documents:
FlexonTM GBIC Installation Guide
FlexonTM GBIC Application Notes
SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5
Obtaining Document
You can visit our website:
http://www.fiberxon.com
Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest
documents.
Revision History
Revision
Initiate
Review
Approve
Subject
Rev. 1a
Univer.Yang
Simon.Jiang
Walker.Wei
Initial datasheet
Rev. 1b
Univer.Yang
Simon.Jiang
Walker.Wei
Upgrade it to formal edition.
Release Date
March 24, 2006
May 18, 2006
© Copyright Fiberxon Inc. 2006
All Rights Reserved.
All information contained in this document is subject to change without notice. The products described in this
document are NOT intended for use in implantation or other life support applications where malfunction may
result in injury or death to persons.
The information contained in this document does not affect or change Fiberxon’s product specifications or
warranties. Nothing in this document shall operate as an express or implied license or indemnity under the
intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained
in specific environments, and is presented as an illustration. The results obtained in other operating
environment may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event
will Fiberxon be liable for damages arising directly from any use of the information contained in this document.
Contact
U.S.A. Headquarter:
5201 Great America Parkway, Suite 340
Santa Clara, CA 95054
U. S. A.
Tel: 408-562-6288
Fax: 408-562-6289
Or visit our website: http://www.fiberxon.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 8 of 8
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 5/19/2006 2:24 PM
Similar pages