VISHAY VS-15AWL06FN-M3

New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
Vishay Semiconductors
Ultralow VF Ultrafast Rectifier, 15 A FRED Pt®
FEATURES
• Ultrafast recovery time, extremely low VF and
soft recovery
• 175 °C maximum operating junction temperature
• For PFC DCM operation
VS-15AWL06FN-M3
VS-15EWL06FN-M3
Base cathode
4, 2
• Low leakage current
• Compliant to RoHS Directive 2002/95/EC
2, 4
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Halogen-free according to IEC 61249-2-21 definition
1
Anode
3
Anode
3
Anode
1
N/C
DESCRIPTION/APPLICATIONS
State of the art, ultralow VF, soft-switching hyperfast
rectifiers optimized for Discontinuous (Critical) Mode (DCM)
Power Factor Correction (PFC).
The minimized conduction loss, optimized stored charge
and low recovery current minimize the switching losses and
reduce over dissipation in the switching element and
snubbers.
The device is also intended for use as a freewheeling diode
in power supplies and other power switching applications.
D-PAK (TO-252AA)
PRODUCT SUMMARY
Package
D-PAK (TO-252AA)
IF(AV)
15 A
VR
600 V
VF at IF
1.05 V
trr (typ.)
60 ns
TJ max.
175 °C
Diode variation
Single die
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
600
V
Peak repetitive reverse voltage
VRRM
Average rectified forward current
IF(AV)
TC = 148 °C
15
Non-repetitive peak surge current
IFSM
TJ = 25 °C
180
Peak repetitive forward current
IFM
TC = 148 °C, f = 20 kHz, d = 50 %
30
Operating junction and storage temperatures
TJ, TStg
A
- 65 to 175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
Breakdown voltage,
blocking voltage
Forward voltage
SYMBOL
VBR,
VR
VF
TEST CONDITIONS
MIN.
TYP.
MAX.
600
-
-
IF = 15 A
-
0.99
1.05
IR = 100 μA
IF = 15 A, TJ = 150 °C
-
0.85
0.92
VR = VR rated
-
-
10
TJ = 150 °C, VR = VR rated
-
-
120
UNITS
V
μA
Reverse leakage current
IR
Junction capacitance
CT
VR = 600 V
-
11
-
pF
Series inductance
LS
Measured lead to lead 5 mm from package body
-
8
-
nH
Document Number: 93568
Revision: 15-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
Vishay Semiconductors Ultralow VF Ultrafast Rectifier, 15 A FRED Pt®
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V
-
60
120
IF = 15 A, dIF/dt = 100 A/μs, VR = 30 V
-
190
-
TJ = 25 °C
-
220
-
-
290
-
-
21
-
-
25
-
TJ = 25 °C
-
2.6
-
TJ = 125 °C
-
4
-
MIN.
TYP.
MAX.
UNITS
TJ, TStg
- 65
-
175
°C
Thermal resistance,
junction to case per leg
RthJC
-
1.4
1.8
Thermal resistance,
junction to ambient per leg
RthJA
-
-
70
Reverse recovery time
trr
TJ = 125 °C
Peak recovery current
Reverse recovery charge
IRRM
Qrr
TJ = 25 °C
TJ = 125 °C
IF = 15 A
dIF/dt = 200 A/μs
VR = 390 V
ns
A
μC
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
Maximum junction and storage
temperature range
SYMBOL
TEST CONDITIONS
°C/W
Approximate weight
Marking device
www.vishay.com
2
Case style D-PAK (TO-252AA)
0.3
g
0.01
oz.
15AWL06FN
15EWL06FN
For technical questions within your region, please contact one of the following:
Document Number: 93568
[email protected], [email protected], [email protected]
Revision: 15-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
100
100
TJ = 175 °C
IR - Reverse Current (μA)
IF - Instantaneous Forward Current (A)
Ultralow VF Ultrafast Rectifier, 15 A FRED Pt® Vishay Semiconductors
TJ = 175 °C
10
TJ = 125 °C
1
TJ = 25 °C
0.1
0.2
TJ = 150 °C
TJ = 125 °C
1
TJ = 100 °C
0.1
TJ = 75 °C
TJ = 50 °C
0.01
TJ = 25 °C
0.001
0.0001
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
1.8
VF - Forward Voltage Drop (V)
93236_01
10
100
200
300
400
500
600
VR - Reverse Voltage (V)
93236_02
Fig. 1 - Typical Forward Voltage Drop Characteristics
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
CT - Junction Capacitance (pF)
100
10
1
0
93236_03
100
200
300
400
500
600
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
0.1
Single pulse
(thermal resistance)
0.01
0.00001
93236_04
0.0001
0.001
0.01
0.1
1
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93568
Revision: 15-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
180
450
400
170
350
DC
160
300
trr (ns)
Allowable Case Temperature (°C)
Vishay Semiconductors Ultralow VF Ultrafast Rectifier, 15 A FRED Pt®
150
140
250
200
100
50
See note (1)
120
0
5
10
15
20
0
100
25
IF(AV) - Average Forward Current (A)
93236_05
Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt
5000
20
4500
15
D = 0.01
D = 0.02
D = 0.05
D = 0.10
D = 0.20
D = 0.50
DC
10
5
5
10
15
3500
3000
2500
IF = 15 A, TJ = 25 °C
2000
0
0
IF = 15 A, TJ = 125 °C
4000
RMS limit
Qrr (nC)
Average Power Loss (W)
1000
dIF/dt (A/μs)
93236_07
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
93236_06
IF = 15 A, TJ = 25 °C
150
Square wave (D = 0.50)
Rated VR applied
130
IF = 15 A, TJ = 125 °C
20
25
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics
1500
100
93236_08
1000
dIF/dt (A/μs)
Fig. 8 - Typical Stored Charge vs. dIF/dt
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions within your region, please contact one of the following:
Document Number: 93568
[email protected], [email protected], [email protected]
Revision: 15-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
Ultralow VF Ultrafast Rectifier, 15 A FRED Pt® Vishay Semiconductors
VR = 200 V
0.01 Ω
L = 70 μH
D.U.T.
dIF/dt
adjust
D
IRFP250
G
S
Fig. 9 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
Qrr
(2)
IRRM
(4)
0.5 IRRM
dI(rec)M/dt (5)
0.75 IRRM
(1) dIF/dt
(1) dIF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve defined by trr
and IRRM
Qrr =
trr x IRRM
2
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and Definitions
Document Number: 93568
Revision: 15-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
VS-15AWL06FN-M3, VS-15EWL06FN-M3
Vishay Semiconductors Ultralow VF Ultrafast Rectifier, 15 A FRED Pt®
ORDERING INFORMATION TABLE
Device code
VS-
15
A
W
L
06
FN
1
2
3
4
5
6
7
1
-
Vishay Semiconductors product
2
-
Current rating (15 = 15 A)
3
-
Circuit configuration:
TRL -M3
8
9
A = Single diode (2 anodes)
E = Single diode
4
-
Package identifier:
W = D-PAK
5
-
L = Hyperfast rectifier
6
-
Voltage rating (06 = 600 V)
7
-
FN = TO-252AA
8
-
None = Tube
TR = Tape and reel
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
9
-
Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
VS-15AWL06FN-M3
VS-15EWL06FN-M3
VS-15AWL06FNTR-M3
VS-15EWL06FNTR-M3
VS-15AWL06FNTRL-M3
VS-15EWL06FNTRL-M3
VS-15AWL06FNTRR-M3
VS-15EWL06FNTRR-M3
QUANTITY PER T/R
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
75
3000
Antistatic plastic tube
2000
2000
13" diameter reel
3000
3000
13" diameter reel
3000
3000
13" diameter reel
LINKS TO RELATED DOCUMENTS
Dimensions
www.vishay.com/doc?95016
Part marking information
www.vishay.com/doc?95176
Packaging information
www.vishay.com/doc?95033
SPICE model
www.vishay.com/doc?95372
www.vishay.com
6
For technical questions within your region, please contact one of the following:
Document Number: 93568
[email protected], [email protected], [email protected]
Revision: 15-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
www.vishay.com
Vishay Semiconductors
D-PAK (TO-252AA)
DIMENSIONS in millimeters and inches
(5)
A
E
b3
Pad layout
C
A
(3)
0.010 M C A B
c2
A
L3 (3)
Ø1
4
Ø2
4
B
Seating
plane
H
D (5)
1
2
3
(2) L5
b
1
A
c
b2
0.06
MIN.
(1.524)
0.010 M C A B
0.093 (2.38)
0.085 (2.18)
(L1)
Detail “C”
Rotated 90 °CW
Scale: 20:1
H (7)
Lead tip
C
Gauge
plane
L2
SYMBOL
2
0.488 (12.40)
0.409 (10.40)
0.089
MIN.
(2.28)
Detail “C”
2x e
0.245
MIN.
(6.23)
D1
L4
3
0.265
MIN.
(6.74)
E1
MILLIMETERS
INCHES
C Seating
plane
C
Ø
L
NOTES
A1
SYMBOL
MILLIMETERS
MIN.
MAX.
INCHES
MIN.
MAX.
MIN.
MAX.
A
2.18
2.39
0.086
0.094
e
A1
-
0.13
-
0.005
H
9.40
10.41
0.370
0.410
1.40
1.78
0.055
0.070
2.29 BSC
MIN.
MAX.
0.090 BSC
b
0.64
0.89
0.025
0.035
L
b2
0.76
1.14
0.030
0.045
L1
b3
4.95
5.46
0.195
0.215
c
0.46
0.61
0.018
0.024
L3
0.89
1.27
0.035
0.050
c2
0.46
0.89
0.018
0.035
L4
-
1.02
-
0.040
3
2.74 BSC
L2
0.51 BSC
NOTES
0.108 REF.
0.020 BSC
D
5.97
6.22
0.235
0.245
5
L5
1.14
1.52
0.045
0.060
D1
5.21
-
0.205
-
3
Ø
0°
10°
0°
10°
E
6.35
6.73
0.250
0.265
5
Ø1
0°
15°
0°
15°
E1
4.32
-
0.170
-
3
Ø2
25°
35°
25°
35°
3
2
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Lead dimension uncontrolled in L5
(3) Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad
(4) Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip
(5) Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outermost extremes of the plastic body
(6) Dimension b1 and c1 applied to base metal only
(7) Datum A and B to be determined at datum plane H
(8) Outline conforms to JEDEC outline TO-252AA
Revision: 05-Dec-12
Document Number: 95016
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000