Industrial Temperature K4E660412E,K4E640412E CMOS DRAM 16M x 4bit CMOS Dynamic RAM with Extended Data Out DESCRIPTION This is a family of 16,777,216 x 4 bit Extended Data Out Mode CMOS DRAMs. Extended Data Out Mode offers high speed random access of memory cells within the same row. Refresh cycle(4K Ref. or 8K Ref.), access time (-45, -50 or -60), power consumption(Normal or Low power) are optional features of this family. All of this family have CAS-before-RAS refresh, RAS-only refresh and Hidden refresh capabilities. Furthermore, Self-refresh operation is available in L-version. This 16Mx4 EDO Mode DRAM family is fabricated using Samsung′s advanced CMOS process to realize high band-width, low power consumption and high reliability. FEATURES • Extended Data Out Mode operation • Part Identification - K4E660412E-JI/P(3.3V, 8K Ref., SOJ) - K4E640412E-JI/P(3.3V, 4K Ref., SOJ) - K4E660412E-TI/P(3.3V, 8K Ref., TSOP) - K4E640412E-TI/P(3.3V, 4K Ref., TSOP) • CAS-before-RAS refresh capability • RAS-only and Hidden refresh capability • Self-refresh capability (L-ver only) • Fast parallel test mode capability • LVTTL(3.3V) compatible inputs and outputs • Active Power Dissipation • Early Write or output enable controlled write Unit : mW • JEDEC Standard pinout Speed 8K 4K • Available in Plastic SOJ and TSOP(II) packages -45 324 432 • +3.3V±0.3V power supply -50 288 396 • Industrial Temperature operating ( -40~85°C ) -60 252 360 • Refresh Cycles Refresh cycle K4E660412E* K4E640412E 8K FUNCTIONAL BLOCK DIAGRAM Refresh time Normal L-ver 64ms 128ms 4K RAS CAS Control Clocks W * Access mode & RAS only refresh mode : 8K cycle/64ms(Normal), 8K cycle/128ms(L-ver.) CAS -before-RAS & Hidden refresh mode : 4K cycle/64ms(Normal), 4K cycle/128ms(L-ver.) Refresh Timer Refresh Counter Speed t RAC t CAC t RC t HPC -45 45ns 12ns 74ns 17ns -50 50ns 13ns 84ns 20ns -60 60ns 15ns 104ns 25ns Row Decoder Refresh Control • Performance Range A0~A12 (A0~A11)*1 Row Address Buffer A0~A10 (A0~A11)*1 Col. Address Buffer Vcc Vss VBB Generator Memory Array 16,777,216 x 4 Cells Column Decoder Note) *1 : 4K Refresh SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice. Sens e Amps & I/O Part NO. Data in Buffer DQ0 to DQ3 Data out Buffer Industrial Temperature K4E660412E,K4E640412E CMOS DRAM PIN CONFIGURATION (Top Views) • K4E660412E-T • K4E640412E-T • K4E660412E-J • K4E640412E-J V CC DQ0 DQ1 N.C N.C N.C N.C W RAS A0 A1 A2 A3 A4 A5 V CC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 VSS DQ3 DQ2 N.C N.C N.C CAS OE A12(N.C)* A11 A10 A9 A8 A7 A6 VSS V CC DQ0 DQ1 N.C N.C N.C N.C W RAS A0 A1 A2 A3 A4 A5 V CC (J : 400mil SOJ) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 (T : 400mil TSOP(II)) * (N.C) : N.C for 4K Refresh product Pin Name Pin Function A0 - A12 Address Inputs(8K Product) A0 - A11 Address Inputs(4K Product) DQ0 - 3 Data In/Out VSS Ground RAS Row Address Strobe CAS Column Address Strobe W Read/Write Input OE Data Output Enable VCC Power(+3.3V) N.C No Connection VSS DQ3 DQ2 N.C N.C N.C CAS OE A12(N.C)* A11 A10 A9 A8 A7 A6 VSS Industrial Temperature K4E660412E,K4E640412E CMOS DRAM ABSOLUTE MAXIMUM RATINGS Parameter Symbol Rating Units VIN, VO U T -0.5 to +4.6 V Voltage on VCC supply relative to V SS V CC -0.5 to +4.6 V Storage Temperature Tstg -55 to +150 °C Power Dissipation PD 1 W IOS Address 50 mA Voltage on any pin relative to VSS Short Circuit Output Current * Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS Parameter (Voltage referenced to Vss, TA= -40 to 85°C) Symbol Min Typ Max Units Supply Voltage VC C 3.0 3.3 3.6 V Ground VSS 0 0 0 V *1 Input High Voltage VI H 2.0 - Vcc+0.3 V Input Low Voltage V IL -0.3 *2 - 0.8 V *1 : Vcc+1.3V at pulse width ≤15ns which is measured at VC C *2 : -1.3 at pulse width≤15ns which is measured at V SS DC AND OPERATING CHARACTERISTICS Parameter (Recommended operating conditions unless otherwise noted.) Symbol Min Max Units Input Leakage Current (Any input 0≤V I N≤V CC+0.3V, all other pins not under test=0 Volt) II(L) -5 5 uA Output Leakage Current (Data out is disabled, 0V≤V OUT ≤VCC ) IO(L) -5 5 uA Output High Voltage Level(IO H=-2mA) VO H 2.4 - V Output Low Voltage Level(IOL=2mA) VOL - 0.4 V Industrial Temperature K4E660412E,K4E640412E CMOS DRAM DC AND OPERATING CHARACTERISTICS (Continued) Symbol Power Max Speed Units K4E660412E K4E640412E ICC1 Don′t care -45 -50 -60 90 80 70 120 110 100 mA mA mA ICC2 Normal L Don′t care 1 1 1 1 mA mA ICC3 Don′t care -45 -50 -60 90 80 70 120 110 100 mA mA mA ICC4 Don′t care -45 -50 -60 100 90 80 100 90 80 mA mA mA ICC5 Normal L Don′t care 0.5 200 0.5 200 mA uA ICC6 Don′t care -45 -50 -60 120 110 100 120 110 100 mA mA mA ICC7 L Don′t care 350 350 uA IC C S L Don′t care 350 350 uA ICC1 * : Operating Current (RAS and CAS, Address cycling @tRC =min.) ICC2 : Standby Current (RAS=CAS=W=V IH) ICC3 * : RAS-only Refresh Current (CAS=V IH , RAS, Address cycling @ t RC=min.) ICC4 * : Extended Data Out Mode Current (RAS=VIL , CAS, Address cycling @ t HPC =min.) ICC5 : Standby Current (RAS=CAS=W=V CC-0.2V) ICC6 * : CAS-Before-RAS Refresh Current (RAS and CAS cycling @ tRC =min) ICC7 : Battery back-up current, Average power supply current, Battery back-up mode Input high voltage(VI H)=VC C-0.2V, Input low voltage(VIL)=0.2V, CAS=CAS-before-RAS cycling or 0.2V W, OE =VI H, Address=Don′t care, DQ=Open, TR C=31.25us ICCS : Self Refresh Current RAS=CAS=0.2V, W=OE=A0 ~ A12(A11)=V CC -0.2V or 0.2V, DQ0 ~ DQ3=V CC-0.2V, 0.2V or Open *Note : ICC1 , I CC3 , IC C 4 and I CC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open. ICC is specified as an average current. In ICC1 , IC C 3 and I CC6, address can be changed maximum once while RAS=V IL . In I CC4 , address can be changed maximum once within one EDO mode cycle time, t HPC . Industrial Temperature K4E660412E,K4E640412E CAPACITANCE (TA=25°C, CMOS DRAM VCC=3.3V, f=1MHz) Parameter Symbol Min Max Units Input capacitance [A0 ~ A12] CIN1 - 5 pF Input capacitance [RAS , CAS, W, OE ] CIN2 - 7 pF Output capacitance [DQ0 - DQ3] CDQ - 7 pF AC CHARACTERISTICS (-40°C≤TA≤85°C, See note 2) Test condition : VC C=3.3V±0.3V, Vih/Vil=2.2/0.7V, Voh/Vol=2.0/0.8V Parameter -45 Symbol Min -50 Max Min -60 Max Min Units Note Max Random read or write cycle time tR C 74 84 104 ns Read-modify-write cycle time tR W C 101 113 138 ns Access time from RAS t RAC 45 50 60 ns 3,4,10,12 Access time from CAS t CAC 12 13 15 ns 3,4,5,12 Access time from column address t AA 23 25 30 ns 3,10,12 CAS to output in Low-Z t CLZ 3 ns 3 Output buffer turn-off delay from CAS t CEZ 3 ns 6,13 OE to output in Low-Z t OLZ 3 ns 3 Transition time (rise and fall) tT 1 ns 2 RAS precharge time tR P 25 RAS pulse width t RAS 45 RAS hold time t RSH 8 8 10 ns CAS hold time t CSH 35 38 40 ns CAS pulse width 3 13 3 3 13 3 50 1 50 13 3 50 30 10K 3 1 50 40 10K 60 ns 10K ns t CAS 7 5K 8 10K 10 10K ns 16 RAS to CAS delay time t RCD 11 33 11 37 14 45 ns 4 RAS to column address delay time t RAD 9 22 9 25 12 30 ns 10 CAS to RAS precharge time t CRP 5 5 5 ns Row address set-up time t ASR 0 0 0 ns Row address hold time t RAH 7 7 10 ns Column address set-up time t ASC 0 0 0 ns Column address hold time t CAH 7 7 10 ns Column address to RAS lead time t RAL 23 25 30 ns Read command set-up time t RCS 0 0 0 ns Read command hold time referenced to CAS t RCH 0 0 0 ns 8 Read command hold time referenced to RAS t RRH 0 0 0 ns 8 Write command hold time t WCH 7 7 10 ns Write command pulse width tW P 6 7 10 ns Write command to RAS lead time tR W L 8 8 10 ns Write command to CAS lead time t CWL 7 7 10 ns Data set-up time tD S 0 0 0 ns 9 Industrial Temperature K4E660412E,K4E640412E AC CHARACTERISTICS CMOS DRAM (Continued) Parameter -45 Symbol Min -50 Max 7 Min -60 Max 7 Min Units Note ns 9 Max Data hold time tD H 10 Refresh period (Normal) tR E F 64 64 64 ms Refresh period (L-ver) tR E F 128 128 128 ms Write command set-up time t WCS 0 0 0 ns 7 CAS to W delay time t CWD 24 27 32 ns 7 RAS to W delay time tR W D 57 64 77 ns 7 Column address to W delay time t AWD 35 39 47 ns 7 CAS set-up time (CAS -before-RAS refresh) t CSR 5 5 5 ns CAS hold time (CAS -before-RAS refresh) t CHR 10 10 10 ns RAS to CAS precharge time t RPC 5 5 5 ns Access time from CAS precharge t CPA Hyper Page cycle time t HPC Hyper Page read-modify-write cycle time 24 28 35 ns 3 17 20 25 ns 14 14 t HPRWC 47 47 56 ns CAS precharge time (Hyper page cycle) tC P 6.5 7 10 ns RAS pulse width (Hyper page cycle) t RASP 45 RAS hold time from CAS precharge t RHCP 24 OE access time t OEA OE to data delay t OED 8 10 13 ns CAS precharge to W delay time t CPWD 36 41 52 ns Output buffer turn off delay time from OE 200K 50 200K 30 12 11 60 35 13 3 200K 13 ns 15 13 ns tOEZ 3 t OEH 5 5 5 ns Write command set-up time (Test mode in) t WTS 10 10 10 ns 11 Write command hold time (Test mode in) t WTH 10 10 10 ns 11 W to RAS precharge time (C-B-R refresh) t WRP 10 10 10 ns W to RAS hold time (C-B-R refresh) t WRH 10 10 10 ns Output data hold time 5 ns 3 OE command hold time 5 3 ns 6 t DOH 4 Output buffer turn off delay from RAS tR E Z 3 13 3 13 3 13 ns ns 6,13 Output buffer turn off delay from W t WEZ 3 13 3 13 3 13 ns 6 W to data delay t WED 8 15 15 ns OE to CAS hold time t OCH 5 5 5 ns CAS hold time to OE t CHO 5 5 5 ns OE precharge time t OEP 5 5 5 ns W pulse width (Hyper Page Cycle) t WPE 5 5 5 ns RAS pulse width (C-B-R self refresh) t RASS 100 100 100 us 15,16,17 RAS precharge time (C-B-R self refresh) tRPS 74 90 110 ns 15,16,17 CAS hold time (C-B-R self refresh) t CHS -50 -50 -50 ns 15,16,17 Industrial Temperature K4E660412E,K4E640412E CMOS DRAM TEST MODE CYCLE Parameter ( Note 11 ) -45 Symbol Min -50 Max Min -60 Max Min Units Note Max Random read or write cycle time tR C 79 89 109 ns Read-modify-write cycle time tR W C 110 121 145 ns Access time from RAS t RAC 50 55 65 ns 3,4,10,12 Access time from CAS t CAC 17 18 20 ns 3,4,5,12 Access time from column address t AA 28 30 35 ns 3,10,12 RAS pulse width tRAS 50 10K 55 10K 65 10K ns CAS pulse width tCAS 12 10K 13 10K 15 10K ns RAS hold time t RSH 18 18 20 ns CAS hold time t CSH 39 43 50 ns Column Address to RAS lead time tRAL 28 30 35 ns CAS to W delay time t CWD 29 35 39 ns 7 RAS to W delay time tR W D 62 72 84 ns 7 Column Address to W delay time t AWD 40 47 54 ns 7 Hyper Page cycle time t HPC 22 25 30 ns 14 Hyper Page read-modify-write cycle time t HPRWC 52 53 61 ns 14 RAS pulse width (Hyper page cycle) t RASP 50 Access time from CAS precharge t CPA 29 OE access time t OEA 17 OE to data delay t OED 13 18 20 ns OE command hold time t OEH 13 18 20 ns 200K 55 200K 65 200K ns 33 40 ns 3 18 20 ns 3 Industrial Temperature K4E660412E,K4E640412E CMOS DRAM NOTES 1. An initial pause of 200us is required after power-up followed by any 8 RAS-only or CAS-before-RAS refresh cycles before proper device operation is achieved. 2. Input voltage levels are Vih/Vil. VIH (min) and VIL(max) are reference levels for measuring timing of input signals. Transition times are measured between V IH(min) and V IL (max) and are assumed to be 2ns for all inputs. 3. Measured with a load equivalent to 1 TTL load and 100pF. 4. Operation within the t RCD (max) limit insures that tRAC (max) can be met. tRCD (max) is specified as a reference point only. If t RCD is greater than the specified t RCD (max) limit, then access time is controlled exclusively by tCAC . 5. Assumes that t R C D≥t R C D(max). 6. This parameter defines the time at which the output achieves the open circuit condition and is not referenced to Voh or Vol . 7. t W C S, tRWD , tCWD and tAWD are non restrictive operating parameters. They are included in the data sheet as electric characteristics only. If t WCS ≥tW C S(min), the cycles is an early write cycle and the data output will remain high impedance for the duration of the cycle. If t C W D≥t C W D(min), tRWD ≥ tRWD (min) and t AWD ≥t AWD (min), then the cycle is a read-modify-write cycle and the data output will contain the data read from the selected address. If neither of the above conditions is satisfied, the condition of the data out is indeterminate. 8. Either tRCH or t RRH must be satisfied for a read cycle. 9. This parameters are referenced to the CAS falling edge in early write cycles and to the W falling edge in OE controlled write cycle and read-modify-write cycles. 10. Operation within the t RAD (max) limit insures that t RAC (max) can be met. t RAD (max) is specified as a reference point only. If t RAD is greater than the specified tRAD (max) limit, then access time is controlled by tAA . 11. These specifications are applied in the test mode. 12. In test mode read cycle, the value of tRAC , t AA, tCAC is delayed by 2ns to 5ns for the specified values. These parameters should be specified in test mode cycles by adding the above value to the specified value in this data sheet. 13. If RAS goes high before CAS high going, the open circuit condition of the output is achieved by CAS high going. If CAS goes high before RAS high going, the open circuit condition of the output is achieved by RAS high going. 14. t ASC ≥6ns, Assume tT = 2.0ns, if t ASC ≤6ns, then tHPC (min) and tCAS (min) must be increased by the value of "6ns-tASC ". 15. If t R A S S≥100us, then RAS precharge time must use t RPS instead of t R P. 16. For RAS-only-Refresh and Burst CAS-before-RAS refresh mode, 4096 cycles(4K/8K) of burst refresh must be executed within 64ms before and after self refresh, in order to meet refresh specification. 17. For distributed CAS -before-RAS with 15.6us interval, CBR refresh should be executed with in 15.6us immediately before and after self refresh in order to meet refresh specification. Industrial Temperature K4E660412E,K4E640412E CMOS DRAM READ CYCLE tR C t RAS RAS VIL - t CSH tC R P CAS tR P VIH - tR C D tCRP t RSH VIH - t CAS VIL - t RAD t ASR A V IH V IL - t RAH tR A L t ASC t CAH ROW ADDRESS COLUMN ADDRESS tR C H tR C S W tRRH V IH V IL - t WEZ tC E Z tAA OE VIH - tO E Z tOEA VIL - tOLZ tCAC DQ0 ~ DQ3(7) VO H V OL - tRAC OPEN tCLZ t REZ DATA-OUT Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM WRITE CYCLE ( EARLY WRITE ) NOTE : DOUT = OPEN tRC tR A S RAS tR P VIH VIL - tCSH t CRP CAS t RSH V IH - VIH VIL - tC R P tCAS V IL - tRAD tASR A tRCD tRAH t ASC ROW ADDRESS t RAL t CAH COLUMN ADDRESS tC W L t RWL tWCS W OE VIH - t WCH tW P VIL - V IH V IL - DQ0 ~ DQ3(7) VIH VIL - t DS tD H DATA-IN Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM WRITE CYCLE ( OE CONTROLLED WRITE ) NOTE : DOUT = OPEN tR C t RAS RAS V IL - tCSH tCRP CAS tRP V IH - tRCD tRSH tCAS V IH - tCRP V IL - tRAD tR A L t ASR A V IH V IL - t RAH tASC tCAH ROW ADDRESS COLUMN ADDRESS tCWL t RWL W OE t WP V IH V IL - VIH VIL - DQ0 ~ DQ3(7) V IH - t OED tDS t OEH tDH DATA-IN V IL - Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM READ - MODIFY - WRITE CYCLE tR W C tRAS RAS V IL - t CRP CAS tRP V IH - tRCD tRSH V IH - tC A S V IL - t RAD t ASR tRAH t ASC tCAH tCSH A V IH V IL - ROW ADDR COLUMN ADDRESS tAWD t RWL tCWD W tC W L VIH - tW P VIL - tRWD OE t OEA V IH V IL - DQ0 ~ DQ3(7) V I/OH V I/OL - tOLZ tCLZ tCAC tAA tOED tOEZ t RAC VALID DATA-OUT tD S tDH VALID DATA-IN Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HYPER PAGE READ CYCLE t RP t RASP RAS VIH VIL - ¡ó t RHCP tCSH tHPC tC R P CAS VIL - VIH VIL - tC P tCAS VIH - tC P tCAS t HPC tC P tCAS tCAS t RAD t ASR A tR C D t HPC t RAH tASC ROW ADDR t CAH COLUMN ADDRESS tASC tCAH t ASC COLUMN ADDRESS tCAH COLUMN ADDR tASC tCAH t REZ COLUMN ADDRESS tRAL t RCS W V IH V IL - tCAC t AA tCPA tAA VIH - t CPA tOCH tOEA tCPA tCAC t CAC t AA OE tRRH t RCH tAA t CHO t OEP tOEA VIL - t OEP tCAC DQ0 ~ DQ3(7) VOH VOL - tD O H tRAC VALID DATA-OUT tOLZ tCLZ tOEZ t OEA tOEZ VALID DATA-OUT tO E Z VALID DATA-OUT VALID DATA-OUT Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HYPER PAGE WRITE CYCLE ( EARLY WRITE ) NOTE : DOUT = OPEN tRP t RASP RAS V IH - t RHCP V IL - ¡ó tHPC tCRP CAS tR C D tHPC tC P VIH - tCAS VIL - t RSH t CP tCAS t CAS t RAD ¡ó tCSH tASR A V IH V IL - tRAH t ASC t CAH tASC t CAH tASC t CAH ¡ó ROW ADDR. COLUMN ADDRESS COLUMN ADDRESS ¡ó COLUMN ADDRESS t RAL tWCS W V IH - tW C H tW C S t WP t WP ¡ó tWCH tW P V IL - tC W L OE tWCS tWCH t CWL ¡ó VIH VIL - DQ0 ~ DQ3(7) V IH V IL - t CWL t RWL ¡ó tDS t DH tD S tD H tDS tD H ¡ó VALID DATA-IN VALID DATA-IN VALID DATA-IN ¡ó Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HYPER PAGE READ-MODIFY-WRITE CYCLE tRP tRASP RAS VIH - t CSH VIL - tC R P CAS tHPRWC tRCD t CP V IH V IL - VIH VIL - tCAS t RAD t RAH ROW ADDR t RAL tCAH tASC tCAH t ASC COL. ADDR COL. ADDR tRCS W tCRP t CAS t ASR A t RSH tRWL tCWL tC W L VIH - tWP VIL - tW P t CWD tCWD tAWD t RWD OE V IH - t AWD tC P W D tOEA t OEA V IL - tOED tOED t CAC t AA DQ0 ~ DQ3(7) V I/OH V I/OL - tD H tO E Z t CAC tAA tD S t DH tOEZ tDS t RAC t CLZ tCLZ t OLZ VALID DATA-OUT VALID DATA-IN t OLZ VALID DATA-OUT VALID DATA-IN Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HYPER PAGE READ AND WRITE MIXED CYCLE tR P t RASP RAS VIH - READ( tCAC ) R E A D (t CPA) t HPC VIH VIL - t CP t ASR A VIH VIL - t CAS tRAD t RAH tASC ROW ADDR t CAH COLUMN ADDRESS tC P tCAS tCAS tCAS t CAH tASC tR H C P tHPC tHPC t CP CAS R E A D (tAA ) WRITE VIL - tCAH tASC COLUMN ADDRESS t ASC COL. ADDR t CAH COL. ADDR tRAL tR C S W tR C H t RCS tRCH tW C H t RCH tWCS V IH V IL - t WPE tCLZ tWED tC P A OE VIH VIL - DQ0 ~ DQ3(7) V I/OH V I/OL - tOEA tCAC t AA t WEZ t DH tW E Z t AA tD S t REZ t CLZ tRAC VALID DATA-OUT VALID DATA-OUT VALID DATA-IN VALID DATA-OUT Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM RAS - ONLY REFRESH CYCLE* NOTE : W, OE, D IN = Don′t care DOUT = OPEN t RC V IH - RAS tR P t RAS V IL - tRPC tCRP tCRP V IH - CAS V IL - tASR V IH - A V IL - tRAH ROW ADDR CAS - BEFORE - RAS REFRESH CYCLE NOTE : OE , A = Don′t care tR C tRP RAS VIH VIL - tRPC tCP CAS t RAS VIH - tRPC t CSR t CHR VIL - tW R P W t RP tWRH VIH V IL - DQ0 ~ DQ3(7) VO H V OL - tC E Z OPEN Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HIDDEN REFRESH CYCLE ( READ ) tRC RAS tRAS V IH - tRCD t RSH V IL - tASR V IH V IL - t RAH t RAL t ASC ROW ADDRESS tCAH COLUMN ADDRESS tW R H tR C S W t CHR V IH - tRAD A t RP t RAS V IL - tC R P CAS t RC tRP V IH V IL - tAA OE V IH - t OEA V IL - t CEZ tOLZ t CAC tREZ tWEZ t CLZ DQ0 ~ DQ3(7) VO H VOL - tRAC OPEN tOEZ DATA-OUT Don′t care Undefined * In Hidden refresh cycle of 64Mb A-dile & B-die, when CAS signal transits from Low to High, the valid data may be cut off. Industrial Temperature K4E660412E,K4E640412E CMOS DRAM HIDDEN REFRESH CYCLE ( WRITE ) NOTE : DOUT = OPEN tRC RAS t RAS VIH - tRCD tRSH tC H R V IH V IL - t RAD t ASR A tR P tR A S VIL - t CRP CAS t RC tR P VIH VIL - t RAH tASC ROW ADDRESS t RAL tCAH COLUMN ADDRESS tWRH tWRP tWCS W OE V IH - tWCH tWP V IL - VIH VIL - tDS DQ0 ~ DQ3(7) VIH - t DH DATA-IN VIL - Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM CAS - BEFORE - RAS SELF REFRESH CYCLE NOTE : OE, A = Don ′t care tRP RAS VIL - t RPC tC H S t CSR V IH VIL - DQ0 ~ DQ3(7) VOH - tCEZ OPEN VOL - W tRPS t RPC tCP CAS t RASS V IH - V IH VIL - tW R P t WRH TEST MODE IN CYCLE NOTE : OE , A = Don ′t care tR C t RP RAS tR P tR A S V IH VIL - tRPC tRPC tCP CAS t CSR V IH - tWTS W tCHR VIL - t WTH V IH VIL - DQ0 ~ DQ3(7) VOH VOL - t OFF OPEN Don′t care Undefined Industrial Temperature K4E660412E,K4E640412E CMOS DRAM PACKAGE DIMENSION 32 SOJ 400mil Units : Inches (millimeters) 0.360 (9.15) 0.380 (9.65) 0.400 (10.16) 0.445 (11.30) 0.435 (11.06) #32 0.006 (0.15) 0.012 (0.30) #1 0.148 (3.76) MAX 0.027 (0.69) MIN 0.841 (21.36) MAX 0.820 (20.84) 0.830 (21.08) 0.0375 (0.95) 0.050 (1.27) 0.026 (0.66) 0.032 (0.81) 0.015 (0.38) 0.021 (0.53) 32 TSOP(II) 400mil 0.400 (10.16) 0.471 (11.96) 0.455 (11.56) Units : Inches (millimeters) 0.004 (0.10) 0.010 (0.25) 0.841 (21.35) MAX 0.821 (20.85) 0.829 (21.05) 0.037 (0.95) 0.050 (1.27) 0.047 (1.20) MAX 0.010 (0.25) TYP 0.002 (0.05) MIN 0.012 (0.30) 0.020 (0.50) 0.018 (0.45) 0.030 (0.75) 0~8 O