VS-12CWQ06FNPbF Vishay Semiconductors Schottky Rectifier, 2 x 6 A FEATURES Base common cathode 4 • Popular D-PAK outline • Center tap configuration • Small foot print, surface mountable • Low forward voltage drop 2 Common cathode 1 3 Anode Anode D-PAK (TO-252AA) • High frequency operation • Guard ring for enhanced ruggedness and long term reliability • Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package D-PAK (TO-252AA) IF(AV) 2x6A VR 60 V VF at IF 0.57 V • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DESCRIPTION IRM 35 mA at 125 °C TJ max. 150 °C Diode variation Common cathode EAS 7 mJ The VS-12CWQ06FNPbF surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS 12 A 60 V Rectangular waveform VRRM IFSM tp = 5 μs sine 320 A VF 6 Apk, TJ = 125 °C (per leg) 0.57 V TJ Range - 55 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-12CWQ06FNPbF UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current See fig. 5 TEST CONDITIONS per leg UNITS 6 IF(AV) 50 % duty cycle at TC = 131 °C, rectangular waveform per device A 12 Following any rated load condition and with rated VRRM applied Maximum peak one cycle non-repetitive surge current See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 1.2 A, L = 10 mH Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 94134 Revision: 14-Jan-11 VALUES 5 μs sine or 3 μs rect. pulse 10 ms sine or 6 ms rect. pulse For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] 320 A 105 7 mJ 0.8 A www.vishay.com 1 VS-12CWQ06FNPbF Schottky Rectifier, 2 x 6 A Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 6A Maximum forward voltage drop per leg See fig. 1 VFM (1) TJ = 25 °C 12 A 6A TJ = 125 °C 12 A Maximum reverse leakage current per leg See fig. 2 IRM (1) Threshold voltage VF(TO) TJ = 25 °C VALUES UNITS 0.61 0.79 V 0.57 0.72 3 VR = Rated VR TJ = 125 °C mA 35 TJ = TJ maximum 0.36 V Forward slope resistance rt 24.14 m Typical junction capacitance per leg CT VR = 5 VDC, (test signal range 100 kHz to 1 MHz), 25 °C 360 pF Typical series inductance per leg LS Measured lead to lead 5 mm from package body 5.0 nH VALUES UNITS - 55 to 150 °C Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ (1), TStg Maximum thermal resistance, junction to case per leg per device RthJC TEST CONDITIONS DC operation See fig. 4 Approximate weight Marking device Case style D-PAK (similar to TO-252AA) 3.0 1.5 °C/W 0.3 g 0.01 oz. 12CWQ06FN Note (1) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94134 Revision: 14-Jan-11 VS-12CWQ06FNPbF Schottky Rectifier, 2 x 6 A 100 Vishay Semiconductors 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) TJ = 150 °C TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 TJ = 125 °C 10 TJ = 100 °C 1 TJ = 75 °C 0.1 TJ = 50 °C 0.01 TJ = 25 °C 0.001 0 VFM - Forward Voltage Drop (V) 10 20 30 50 40 60 VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 10 0 10 20 30 40 50 60 70 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 PDM D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94134 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 VS-12CWQ06FNPbF Schottky Rectifier, 2 x 6 A Vishay Semiconductors 6 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 150 145 Average Power Loss (W) Allowable Case Temperature (°C) 155 DC 140 135 130 Square wave (D = 0.50) 80 % rated VR applied 125 120 115 5 4 RMS limit 3 2 DC 1 See note (1) 110 0 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 100 At any rated load condition and with rated VRRM applied following surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94134 Revision: 14-Jan-11 VS-12CWQ06FNPbF Schottky Rectifier, 2 x 6 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 12 C W Q 06 FN 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (12 A) 3 - Center tap configuration- 4 - Package identifier: TRL PbF 8 9 W = D-PAK 4 5 - Schottky “Q” series 6 - Voltage rating (06 = 60 V) 7 - FN = TO-252AA 8 - None = Tube (50 pieces) TR = Tape and reel TRL = Tape and reel (left oriented) TRR = Tape and reel (right oriented) 9 - PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95016 Part marking information www.vishay.com/doc?95059 Packaging information www.vishay.com/doc?95033 SPICE model www.vishay.com/doc?95278 Document Number: 94134 Revision: 14-Jan-11 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Outline Dimensions www.vishay.com Vishay Semiconductors D-PAK (TO-252AA) DIMENSIONS in millimeters and inches (5) A E b3 Pad layout C A (3) 0.010 M C A B c2 A L3 (3) Ø1 4 Ø2 4 B Seating plane H D (5) 1 2 3 (2) L5 b 1 A c b2 0.06 MIN. (1.524) 0.010 M C A B 0.093 (2.38) 0.085 (2.18) (L1) Detail “C” Rotated 90 °CW Scale: 20:1 H (7) Lead tip C Gauge plane L2 SYMBOL 2 0.488 (12.40) 0.409 (10.40) 0.089 MIN. (2.28) Detail “C” 2x e 0.245 MIN. (6.23) D1 L4 3 0.265 MIN. (6.74) E1 MILLIMETERS INCHES C Seating plane C Ø L NOTES A1 SYMBOL MILLIMETERS MIN. MAX. INCHES MIN. MAX. MIN. MAX. A 2.18 2.39 0.086 0.094 e A1 - 0.13 - 0.005 H 9.40 10.41 0.370 0.410 1.40 1.78 0.055 0.070 2.29 BSC MIN. MAX. 0.090 BSC b 0.64 0.89 0.025 0.035 L b2 0.76 1.14 0.030 0.045 L1 b3 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 L3 0.89 1.27 0.035 0.050 c2 0.46 0.89 0.018 0.035 L4 - 1.02 - 0.040 3 2.74 BSC L2 0.51 BSC NOTES 0.108 REF. 0.020 BSC D 5.97 6.22 0.235 0.245 5 L5 1.14 1.52 0.045 0.060 D1 5.21 - 0.205 - 3 Ø 0° 10° 0° 10° E 6.35 6.73 0.250 0.265 5 Ø1 0° 15° 0° 15° E1 4.32 - 0.170 - 3 Ø2 25° 35° 25° 35° 3 2 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension uncontrolled in L5 (3) Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad (4) Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip (5) Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (6) Dimension b1 and c1 applied to base metal only (7) Datum A and B to be determined at datum plane H (8) Outline conforms to JEDEC outline TO-252AA Revision: 05-Dec-12 Document Number: 95016 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000