S414D Vishay Telefunken Fast Soft Recovery Rectifier Features D D D D D Hermetically sealed glass envelope Glass passivated Low reverse current Miniature axial leaded High reverse voltage Applications 95 10526 TV and monitor Electronic ballast Absolute Maximum Ratings Tj = 25_C Parameter Test Conditions Reverse voltage=Repetitive peak reverse voltage Peak forward surge current tp=8.3ms, half–sinewave Average forward current Tamb=33°C, l = 10 mm Junction and storage temperature range Type Symbol VR=VRRM Value 1000 Unit V IFSM IFAV Tj=Tstg 30 1.25 –55...+175 A A °C Maximum Thermal Resistance Tj = 25_C Parameter Junction ambient Test Conditions lead length l = 10mm, TL = constant Symbol RthJA Value 60 Unit K/W Electrical Characteristics Tj = 25_C Parameter Forward voltage Reverse current Reverse breakdown voltage Reverse recovery time Document Number 86056 Rev. 2, 24-Jun-98 Test Conditions IF=1A VR=VRRM VR=VRRM, Tj=150°C IR=100mA IF=0.5A, IR=1A, iR=0.25A Type Symbol VF IR IR V(BR)R trr Min Typ Max 1.3 5 150 1000 500 Unit V mA mA V ns www.vishay.de • FaxBack +1-408-970-5600 1 (3) S414D Vishay Telefunken Characteristics (Tj = 25_C unless otherwise specified) 450 PR – Reverse Power Dissipation ( mW ) IF – Forward Current ( A ) 100 10 1 Tj = 175°C 0.1 0.01 Tj = 25°C 350 60K/W 250 110K/W 200 150K/W 150 100 50 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 25 VF – Forward Voltage ( V ) 15951 50 75 100 125 150 175 Tj – Junction Temperature ( °C ) 15953 Figure 1. Forward Current vs. Forward Voltage Figure 3. Max. Reverse Power Dissipation vs. Junction Temperature 1000 1.4 VR = VR RM half sinewave 1.2 1.0 VR = VRRM I R – Reverse Current ( mA ) I FAV– Average Forward Current ( A ) RthJA= 300 0.001 RthJA=60K/W l=10mm 0.8 0.6 0.4 RthJA=110K/W PCB: d=25mm 0.2 0 100 10 1 0 15952 VR = VRRM 400 20 40 60 25 80 100 120 140 160 180 Tamb – Ambient Temperature ( °C ) 75 100 125 150 175 Tj – Junction Temperature ( °C ) 15954 Figure 2. Average Forward Current vs. Ambient Temperature 50 Figure 4. Reverse Current vs. Junction Temperature Dimensions in mm Standard Glass Case DOT 30 B Weight max. 0.5 g ∅ 3 max. Cathode Identification 95 10524 technical drawings according to DIN specifications ∅ 0.82 max. 26 min. www.vishay.de • FaxBack +1-408-970-5600 2 (3) 4.2 max. 26 min. Document Number 86056 Rev. 2, 24-Jun-98 S414D Vishay Telefunken Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423 Document Number 86056 Rev. 2, 24-Jun-98 www.vishay.de • FaxBack +1-408-970-5600 3 (3)