Ordering number : ENN7261 2SC5831 NPN Epitaxial Planar Silicon Transistor 2SC5831 Driver Applications Preliminary Package Dimensions Suitable for use in switching of inductive load (motor drivers, printer hammer drivers, relay drivers). unit : mm 2042B • • 3.3 3.0 1.6 0.8 15.5 3.0 • 1.0 7.5 • High DC current gain. Wide ASO. On-chip zener diode of 65±10V between collector and base. Uniformity in collector-to-base voltage. Large inductive load handling capability. 4.0 1.0 1.5 • [2SC5831] 8.0 Features 1.4 • 11.0 Applications 0.8 0.7 0.75 1 2 1.7 2.4 Specifications 1 : Emitter 2 : Collector 3 : Base 3 4.8 SANYO : TO-126ML Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO *55 V Collector-to-Emitter Voltage VCEO *55 V Emitter-to-Base Voltage VEBO 6 V IC 2 A Collector Current Collector Current (Pulse) ICP Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg Tc=25°C 4 A 1.5 W 10 W 150 °C −55 to +150 °C *: On-chip zener diode(65±10V) Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current Symbol ICBO IEBO Conditions Ratings min typ Unit max VCB=40V, IE=0 VEB=5V, IC=0 10 µA 2 mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN GI IM No.7261-1/4 D2502 TS IM TA-100102 2SC5831 Continued from preceding page. Parameter Symbol DC Current Gain hFE fT Gain-Bandwidth Product Inductive Load Base-to-Emitter Saturation Voltage VBE(sat) Fall Time 180 mJ 1.0 1.5 V 2.0 V 55 65 75 V 55 65 75 V See specified Test Circuit. 0.2 µs See specified Test Circuit. 3.5 µs See specified Test Circuit. 0.5 µs Switching Time Test Circuit Es / b Test Circuit PW=50µs, Duty Cycle≤1% IB1= --IB2=4mA VCC=20V, RBE=100Ω OUTPUT L TUT +VCC TUT SW RB INPUT MHz 25 IC=100µA, IE=0 IC=1mA, RBE=∞ ton tstg tf Unit max 4000 IC=1A, IB=4mA IC=1A, IB=4mA V(BR)CBO V(BR)CEO Storage Time 1000 L=100mH, RBE=100Ω VCE(sat) Turn-ON Time typ VCE=5V, IC=1A Collector-to-Emitter Saturation Voltage Collector-to-Emitter Breakdown Voltage min VCE=5V, IC=1A Es / b Collector-to-Base Breakdown Voltage Ratings Conditions RL 20Ω VR 50Ω + 100µF IB RBE 10kΩ 300Ω + 470µF VBB= --5V VCC=20V IC=250A, IB1= --250A, IB2=1A IC -- VCE 2.0 0µA 50 250µA 200µA 0.8 150µA 0.4 1.2 0.8 0.4 IB=0 0 0 1 2 3 0 4 0 5 Collector-to-Emitter Voltage, VCE -- V 1 3 C 25° 2 1000 7 5 C 40° -- 3 2 1.6 2.0 2.4 2.8 ITR06006 f=1MHz 7 Output Capacitance, Cob -- pF °C 20 1.2 Cob -- VCB 1000 2 = Ta 0.8 Base-to-Emitter Voltage, VBE -- V VCE=5V 10000 7 5 0.4 ITR06005 hFE -- IC 3 DC Current Gain, hFE 1.6 --40°C 1.2 A 3 400µ 25°C A °C 300µ 50µA 1.6 A 450µ VCE=5V µA Ta=1 20 1000 Collector Current, IC -- A Collector Current, IC -- A 20 0 15 IC -- VBE 2.4 A 0µ 00 µA 2.0 5 3 2 100 7 5 3 2 100 7 5 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC -- A 2 3 5 ITR06007 10 0.1 2 3 5 7 1.0 2 3 5 7 10 Collector-to-Base Voltage, VCB -- V 2 3 5 ITR06008 No.7261-2/4 2SC5831 VCE(sat) -- IC 10 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V IC / IB=250 7 7 5 3 2 ° Ta= --40 C 25°C 1.0 7 120°C 5 3 0.1 2 3 5 7 2 1.0 3 Collector Current, IC -- A 3 Ta= --40°C 2 25°C 1.0 120°C 7 5 3 1.0 7 5 3 5 ITR06010 10µs ICP=4A 3 Collector Current, IC -- A J 2 1.0 10 m s Tc = DC 25 op °C Ta er =2 ati 5° on C, DC op era tio n IC=2A 1.0 7 5 3 2 0.1 7 5 µs 100 s 1m 25m 7 ASO 7 5 2 3 5 Collector Current, IC -- A 5 2 2 ITR06009 RBE=100Ω Tc=25°C 7 5 3 0.1 5 IC -- L 10 Collector Current, IC -- A VBE(sat) -- IC 10 IC / IB=250 3 2 3 0.01 0.1 2 2 3 5 7 2 10 3 5 7 100 L -- mH 2 3 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Emitter Voltage, VCE -- V PC -- Ta 1.6 2 ITR06011 5 7 IT04046 PC -- Tc 12 1.5 Collector Dissipation, PC -- W Collector Dissipation, PC -- W 1.4 1.2 N 1.0 o he at 0.8 sin k 0.6 0.4 10 8 6 4 2 0.2 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 150 160 ITR06013 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 150 160 IT05036 No.7261-3/4 2SC5831 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2002. Specifications and information herein are subject to change without notice. PS No.7261-4/4