2SK3822 Ordering number : ENN8014 N-Channel Silicon MOSFET 2SK3822 General-Purpose Switching Device Applications Features • • • • • Low ON-resistance. 4V drive. Ultrahigh-speed switching. Motor drive, DC / DC converter. Avalanche resistance guarantee. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 100 V Gate-to-Source Voltage VGSS ±20 V 52 A Drain Current (DC) ID IDP Drain Current (Pulse) PW≤10µs, duty cycle≤1% 208 A 1.65 W Allowable Power Dissipation PD 75 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Avalanche Enargy (Single Pulse) *1 EAS 338 mJ Avalanche Current *2 IAV 52 A Tc=25°C Note : *1 VDD=20V, L=200µH, IAV=52A *2 L≤200µH, single pulse Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance V(BR)DSS IDSS IGSS Conditions ID=1mA, VGS=0 VDS=100V, VGS=0 VGS(off) yfs VGS= ±16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=26A RDS(on)1 RDS(on)2 ID=26A, VGS=10V ID=26A, VGS=4V Ratings min typ Unit max 100 V ±10 µA µA 2.6 V 19 25 mΩ 23 32 mΩ 1 1.2 24 Marking : K3822 40 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2404QA TS IM TB-00000330 No.8014-1/4 2SK3822 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Input Capacitance Ciss pF Coss VDS=20V, f=1MHz VDS=20V, f=1MHz 6250 Output Capacitance 440 pF Reverse Transfer Capacitance Crss VDS=20V, f=1MHz 380 pF Turn-ON Delay Time td(on) See specified Test Circuit. 45 ns Rise Time tr td(off) See specified Test Circuit. 135 ns See specified Test Circuit. 480 ns tf See specified Test Circuit. 180 ns Turn-OFF Delay Time Fall Time Total Gate Charge Qg VDS=50V, VGS=10V, ID=52A 117 nC Gate-to-Source Charge Qgs VDS=50V, VGS=10V, ID=52A 20 nC Gate-to-Drain “Miller” Charge Qgd VDS=50V, VGS=10V, ID=52A 25.8 Diode Forward Voltage VSD IS=52A, VGS=0 1.06 10.2 1.6 9.9 8.8 0.8 0.9 11.5 1.3 4.5 0.4 3 1 : Gate 2 : Drain 3 : Source 3 1.2 2.55 2.7 2 2.7 1 2.55 2 1.35 11.0 9.4 3.0 20.9 1.2 1 0.8 2.55 2.55 2.55 2.55 1.3 1.4 4.5 10.2 0.8 V Package Dimensions unit : mm 2090A 1.5max 8.8 Package Dimensions unit : mm 2093A nC 1.5 0 to 0.3 0.4 1 : Gate 2 : Drain 3 : Source SANYO : SMP-FD SANYO : SMP Switching Time Test Circuit Unclamped Inductive Test Circuit VDD=50V VIN 10V 0V ≥50Ω RG ID=26A RL=1.92Ω VIN D L DUT VOUT PW=10µs D.C.≤1% 15V 0V G 50Ω VDD 2SK3822 P.G 50Ω S No.8014-2/4 2SK3822 ID -- VGS 70 VDS=10V 4V 60 30 20 VGS=3V 30 20 10 25 10 40 °C --25° C 40 50 5 °C 50 Tc= 7 Drain Current, ID -- A Drain Current, ID -- A 10V 60 Tc= -2 25°C 5°C 6V 8V Tc=25°C 75 ° C ID -- VDS 70 0 0 1.0 1.5 2.0 2.5 3.0 3.5 Drain-to-Source Voltage, VDS -- V 0 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 40 35 Tc=75°C 25 20 25°C 15 --25°C 10 5 3 4 5 6 7 8 9 Gate-to-Source Voltage, VGS -- V °C 25 10 = Tc 7 5°C --2 °C 75 5 3 2 1.0 7 5 0.1 3 5 7 1.0 2 3 5 7 10 2 3 4.5 IT07876 4V S= VG A, 30 26 I D= V 10 S= VG A, 20 26 I D= 10 --25 0 25 50 75 100 125 150 IT07878 IF -- VSD VGS=0 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 100 IT07879 SW Time -- ID 1000 7 0 0.6 0.9 1.2 1.5 IT07880 Ciss, Coss, Crss -- VDS 10000 f=1MHz VDD=50V VGS=10V td(off) 0.3 Diode Forward Voltage, VSD -- V Ciss 7 5 5 Ciss, Coss, Crss -- pF Switching Time, SW Time -- ns 4.0 0.01 2 Drain Current, ID -- A 3 2 tf 100 tr 7 3 2 1000 7 Coss 5 Crss td(on) 5 3 0.1 3.5 40 100 7 5 3 2 5 2 3.0 Case Temperature, Tc -- °C VDS=10V 3 2.5 50 0 --50 10 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S 7 2.0 RDS(on) -- Tc IT07877 yfs -- ID 100 1.5 60 45 2 1.0 Gate-to-Source Voltage, VGS -- V ID=26A 30 0.5 IT07875 RDS(on) -- VGS 50 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ 4.0 25°C --25°C 0.5 Tc=75 °C 0 3 2 2 3 5 7 1.0 2 3 5 7 10 Drain Current, ID -- A 2 3 5 7 IT07881 0 5 10 15 20 25 Drain-to-Source Voltage, VDS -- V 30 IT07882 No.8014-3/4 2SK3822 VGS -- Qg 10 8 7 6 5 4 3 3 2 40 60 80 100 2 3 5 7 1.0 Allowable Power Dissipation, PD -- W 1.5 1.0 0.5 3 5 7 10 2 3 5 7 100 2 IT07884 PD -- Tc 90 1.65 2 Drain-to-Source Voltage, VDS -- V IT07883 PD -- Ta 2.0 Allowable Power Dissipation, PD -- W 120 s 10 m 0m s op s era tio n 10 Tc=25°C Single pulse 0.1 0.1 0 Total Gate Charge, Qg -- nC Operation in this area is limited by RDS(on). 3 2 0µ s 1m DC 10 7 5 1 20 ID=52A 3 2 1.0 7 5 10 µs 10 100 7 5 2 0 IDP=208A 3 2 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 9 ASO 5 VDS=50V ID=52A 80 75 70 60 50 40 30 20 10 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT07811 0 20 40 60 80 100 120 140 Case Temperature, Tc -- °C 160 IT07844 Note on usage : Since the 2SK3822 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2004. Specifications and information herein are subject to change without notice. PS No.8014-4/4