Ordering number : ENN7660 ALP027XXX LCD Module ALP027XXX Low-Temperature Polysilicon 0.33-inch TFT LCD Module This low power consumption 0.33 inch Low-Temperature polysilicon TFT black and white LCD module is suitable for view finder of digital video camera. Features • • • • • • • • • • • Diagonal 0.835 cm (0.33 inch) display size. 300 ✕ 225 = 67,500 dots. Transmissive type. Black and white delta arrangement. Polarizer ; None. Low power consumption (panel typ. 7.7 mW) by common inversion drive built-in negative power supply generator and gate level shifter. Up/down and right/left inverse function. Built-in level shifter circuit. Recommended IC ; LV4149W (analog I/F). Recommended temperature (panel surface) ; -10 to +60 ºC. Storage temperature ; -20 to +70 ºC. Specifications Item Dot count (H) ✕ (V) Active area dimensions (H) ✕ (V) Display size (diagonal) Dot pitch (H) ✕ (V) Color arrangement Module external dimensions (W) ✕ (H)*1 ✕ (D) FPC length Weight Note1 : Excluding flexible cable and projections. *1 : H = Height. Specifications 300 ✕ 225 6.671 ✕ 4.995 0.835 (0.33 inch) 0.0222 ✕ 0.0222 Delta (typ.) 10.6 ✕ 11.3 ✕ 1.4 (typ.) 28.5 About 0.5 unit dot mm cm mm mm mm g Remarks Note1 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82003 MH IM No.7660-1/6 ALP027XXX Absolute Maximum Ratings at VSS = 0V Item H/V driver power supply voltage V driver negative power supply voltage Common electrode voltage Scan direction signal voltage H/V driver/Drain storage circuit input signal voltage V driver input voltage Symbol VDD VBB COM CSH, CSV STH, XSTH, CKH1, CKH2 DSG, XDSG STV, XSTV, CKV1, CKV2, ENB, XENB Ratings -1.0 to +10 -6.0 to -1.0 -1.0 to +10 -1.0 to +10 unit V V V V -1.0 to +10 V -1.0 to +10 V V1, V2, V3, DSD -1.0 to +8 V Topr Tstg -10 to +60 -20 to +70 ºC ºC Video signal/Drain storage data signal input voltage Operating temperature Storage temperature Operating Conditions at VSS = 0V Item Power supply voltage VBB output voltage Symbol VDD VBB min 8.2 -4.5 typ 8.5 (-4.0) max 8.8 -3.5 unit V V Negative Power Supply Generator To stabilize VBB output voltage, VBB should be tied VSS through a zener diode with smoothing capacitor as the following diagram. VBB(No.14) D1 C1 ALP027XXX VSS(No.3) C1 D1 Capacitance [µF] 0.022 Rating voltage 16VDC and more Capacitance tolerance +80% and less, -20% and more RD5.1S - B2 or RD5.1UM - B2 (NEC makes) or the corresponding products No.7660-2/6 ALP027XXX Input Signal Item H driver/Drain storage circuit input signal voltage V driver input signal voltage H scan control signal voltage V scan control signal voltage Video signal center level Video signal voltage Low High Low High Low High Low High analog I/F Black(H) Black(L) White-Black Common electrode signal center analog I/F level Common electrode voltage amplitude analog I/F Drain storage data signal voltage Symbol VHIL VHIH VVIL VVIH VHSIL VHSIH VVSIL VVSIH VVC Vblack(H) Vblack(L) Vsig w-b VCOM c VCOM p-p VDSD min -0.3 2.5 -0.3 2.5 VSS VDD-0.2 VSS VDD-0.2 3.30 5.05 1.55 (VVC-0.3) -0.2 VVC-0.2 typ 0.0 3.0 0.0 3.0 3.50 5.25 1.75 - unit V V V V V V V V V V V V 3.5 VVC max 0.3 4.0 0.3 4.0 VSS+0.2 VDD VSS+0.2 VDD 3.70 5.45 1.95 2.70 (VVC-0.3) -0.2 3.6 VVC+0.2 min - typ 0.9 max - unit mA - 7.7 - mW (VVC-0.3) V V V Power Consumption Item Panel power consumption Panel power consumption (NTSC) Symbol I Condition PWR Optical Specifications at Ta = 25ºC, θ = 0º, SANYO standard measurement system Item Contrast ratio V-T characteristic Transmittance V90 V10 Symbol CR VT90 VT10 T min - typ 100 1.5 2.4 6.8 max - unit V % No.7660-3/6 ALP027XXX Input Pin Assignmene No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Symbol XSTH STH VSS CKH1 CKH2 VDD CSH V1 V2 V3 DSG XDSG DSD VBB CSV ENB XENB XSTV STV CKV2 CKV1 COM Function Inverted signal of STH H driver start signal VSS for V and H driver H driver clock1 H driver clock2 VDD for H · V driver Right/left scan control signal (H : Normal scan, L : Reverse scan) Video signal (V1) Video signal (V2) Video signal (V3) Drain storage gate signal Inverted signal of DSG Drain storage data signal Negative power supply for V driver Up/down scan control signal (H : Normal scan, L : Reverse scan) Enable signal Inverted signal of ENB Inverted signal of STV V driver start signal V driver clock2 V driver clock1 Common electrode voltage System Configuration Signal processing IC LV4149W V1 Y2 Y3 RGB drivers (S&H) COM DSD Horizontal scanner V2 Power V3 DSD 3 Serial control Synchronous signal BUS I/F Sync. sep. D-storage circuit COM Vertical scanner Y1 Video signal -Y Y Low-Temperature Polysilicon TFT LCD ALP027XXX Display area 12 Timing controller Level shifter VCO No.7660-4/6 ALP027XXX Package Dimensions Unit : mm a b (0.7) (5.3 Shield resin + 0.3 0 10.6 Incident light ) + 0.3 0 (Without projection) A-A 1.4 ±0.14 (Glass surface) max 2 (Reinforcing material) max 7.5 (6.535 + 00.3 ) 2 0.4 ±0.2 7.6 A al ø0 .8 ±0.4 +0 0 .1 ±0.1 027XXX 244A01C + 0.8 -0 8.82 14 28.5 ±0.5 0. 1.6 ±0.5 ±0.1 v 1O ✕ 0.1 11.535 8.535 ±0.5 A 2 ±0.1 11.3 +0.3 0 Screen Center max 0.7 (Shield resin) (4.765) (Display Area) 6.671 4.995 8.5 (BM) (Polarizer) (Display Area) 10 (BM) (Polarizer) Lot No. Model name 6 ±0.4 0.3 ±0.05 (Thickness of the connector) Pin No.1 4 ±0.5 3 ±0.3 Pin No.22 0.35 0.5 ±0.1 +0.04 -0.03 P0.5±0.02✕21=10.5 ±0.03 11.5 Note 1. Unsqecifed dimensional tolerance shall be ±0.2. 2. For the LCD module positioning, avoid areas near the corners and projections. 3. Please implement the protection for ESD on actual unit. 4. Panel's horizontal slant shonld be 0.06 ≥a--b (0.5±0.1) ±0.05 (Detail drawing of FPC terminal) No.7660-5/6 ALP027XXX Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2003. Specifications and information herein are subject to change without notice. Contact Information SANYO Electric Co., Ltd Display Company 1-19-10 Ueno, Taito-Ku, Tokyo 110-0005 TEL(81)03-3837-6355 e-mail : [email protected] PS No.7660-6/6