Ordering number:EN647C DBA20 Diffused Junction Type Silicon Diode 2.0A Single-Phase Bridge Rectifier Features Package Dimensions · Plastic molded structure. · Glass passivation for high reliability. · Peak reverse voltage:VRM=100 to 400V. · Average rectified current:IO=2.0A. unit:mm 1087 [DBA20] Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Peak Reverse Voltage Symbol Conditions DBA20B DBA20C DBA20E Unit Average Recitified Current VRM IO Surge Forward Current IFSM Junction Temperature Tj → → 150 ˚C Storage Temperature Tstg → → –30 to +150 ˚C Ta=40˚C 50Hz sine wave, 1cycle 100 200 400 V → → 2.0 A → → 40 A Electrical Characteristics at Ta = 25˚C Parameter Forward Voltage Reverse Current Symbol VF IR Conditions Ratings min typ max IF=1.0A VR:At each VRM Unit 1.05 V 10 µA Note:Mounting torque:0.49N·m max. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/1129YT, TS No.647-1/2 DBA20 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.647-2/2