Ordering number:EN4724 FP213 PNP Epitaxial Planar Silicon Transistor Motor Driver Applications Features Package Dimensions · Composite type with 2 PNP transistors facilitating high-density mounting. · The FP213 is composed of 2 chips, each being equivalent to the 2SB1397, placed in one package. unit:mm 2097A [FP213] Electrical Connection 1:Base 2:Collector 3:Emitter Common 4:Collector 5:Base 6:Collector 7:Collector 1:Base 2:Collector 3:Emitter Common 4:Collector 5:Base 6:Collector 7:Collector SANYO:PCP5 (Bottom view) (Top view) Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO –25 V Collector-to-Emitter Voltage VCEO VEBO –20 V –6 V IC –2 A ICP –4 Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current IB Collector Dissipation PC Total Power Dissipation PT Junction Temperature Tj Storage Temperature Tstg A –400 mA Mounted on ceramic board (250mm2×0.8mm) 1 unit 0.8 W Mounted on ceramic board (250mm2×0.8mm) 1.1 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta=25˚C Parameter Symbol Collector Cutoff Current ICBO DC Current Gain hFE1 hFE2 Conditons VCB=–20V, IE=0 VCE=–2V, IC=–0.5A fT VCE=–2V, IC=–2A VCE=–2V, IC=–0.5A Cob VCB=–10V, f=1MHz C-E Saturation Voltage VCE(sat) IC=–1A, IB=–50mA B-E Saturation Voltage VBE(sat) C-B Breakdown Voltage V(BR)CBO IC=–1A, IB=–50mA IC=–10µA, IE=0 C-E Breakdown Voltage V(BR)CEO1 Gain-Bandwidth Product Output Capacitance V(BR)CEO2 Diode Forward Voltage Base-to-Emitter Resistance VF RBE IC=–10mA, RBE=∞ IE=–10mA, RBE=∞ Ratings min typ max –1 Unit µA 70 50 300 MHz 40 –0.25 pF –0.5 V –1.5 V –25 V –25 V –20 V IF=0.5A –1.5 1.6 V kΩ Marking:213 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/82494MT (KOTO) BX-0491 No.4724-1/3 FP213 No.4724-2/3 FP213 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.4724-3/3